Merge ../ZoneMinder.master into storageareas

This commit is contained in:
Isaac Connor 2018-03-15 11:04:41 -04:00
commit 27736fb5d9
18 changed files with 314 additions and 170 deletions

View File

@ -483,24 +483,24 @@ if(MP4V2_LIBRARIES)
if(MP4V2_INCLUDE_DIR)
include_directories("${MP4V2_INCLUDE_DIR}")
set(CMAKE_REQUIRED_INCLUDES "${MP4V2_INCLUDE_DIR}")
endif(MP4V2_INCLUDE_DIR)
check_include_file("mp4v2/mp4v2.h" HAVE_MP4V2_MP4V2_H)
endif(MP4V2_INCLUDE_DIR)
# mp4v2.h
find_path(MP4V2_INCLUDE_DIR mp4v2.h)
if(MP4V2_INCLUDE_DIR)
include_directories("${MP4V2_INCLUDE_DIR}")
set(CMAKE_REQUIRED_INCLUDES "${MP4V2_INCLUDE_DIR}")
endif(MP4V2_INCLUDE_DIR)
check_include_file("mp4v2.h" HAVE_MP4V2_H)
endif(MP4V2_INCLUDE_DIR)
# mp4.h
find_path(MP4V2_INCLUDE_DIR mp4.h)
if(MP4V2_INCLUDE_DIR)
include_directories("${MP4V2_INCLUDE_DIR}")
set(CMAKE_REQUIRED_INCLUDES "${MP4V2_INCLUDE_DIR}")
endif(MP4V2_INCLUDE_DIR)
check_include_file("mp4.h" HAVE_MP4_H)
endif(MP4V2_INCLUDE_DIR)
mark_as_advanced(FORCE MP4V2_LIBRARIES MP4V2_INCLUDE_DIR)
set(optlibsfound "${optlibsfound} mp4v2")

View File

@ -771,6 +771,7 @@ INSERT INTO `Controls` VALUES (NULL,'Floureon 1080P','Ffmpeg','Floureon',0,0,0,1
INSERT INTO `Controls` VALUES (NULL,'Reolink RLC-423','Ffmpeg','Reolink',0,0,1,1,0,0,0,1,0,0,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,64,1,1,1,1,0,0,0,1,1,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0);
INSERT INTO `Controls` VALUES (NULL,'Reolink RLC-411','Ffmpeg','Reolink',0,0,1,1,0,0,0,1,0,0,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0);
INSERT INTO `Controls` VALUES (NULL,'Reolink RLC-420','Ffmpeg','Reolink',0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0);
INSERT INTO `Controls` VALUES (NULL,'D-LINK DCS-3415','Remote','DCS3415',0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0);
--
-- Add some monitor preset values

View File

@ -23,8 +23,7 @@ configuration file:
Upgrading database
------------------
Prior to 1.28.1 database upgrade was performed automatically.
"zoneminder" service will refuse to start with outdated database.
The database is updated automatically on installation. You should not need to take this step.
Assuming that database is on "localhost" then the following command can be
used to upgrade "zm" database:
@ -45,17 +44,11 @@ The following command prints the current version of zoneminder database:
Enabling service
----------------
By default Zoneminder service is not starting automatically and need to be
manually activated once database is configured:
On systemd:
By default Zoneminder service is not automatically started and needs to be
manually enabled once database is configured:
sudo systemctl enable zoneminder.service
On SysV:
sudo update-rc.d zoneminder enable
Web server set-up
-----------------
@ -82,10 +75,10 @@ Common configuration steps for Apache2:
## nginx / fcgiwrap
Nginx needs "php5-fpm" package to support PHP and "fcgiwrap" package
Nginx needs "php-fpm" package to support PHP and "fcgiwrap" package
for binary "cgi-bin" applications:
sudo apt-get install php5-fpm fcgiwrap
sudo apt-get install php-fpm fcgiwrap
To enable a URL alias that makes Zoneminder available from
@ -119,32 +112,9 @@ site configuration.
Changing the location for images and events
-------------------------------------------
Zoneminder, in its upstream form, stores data in /usr/share/zoneminder/. This
package modifies that by changing /usr/share/zoneminder/images and
/usr/share/zoneminder/events to symlinks to directories under
/var/cache/zoneminder.
There are numerous places these could be put and ways to do it. But, at the
moment, if you change this, an upgrade will fail with a warning about these
locations having changed (the reason for this was that previously, an upgrade
would silently revert the changes and cause event loss - refer
bug #608793).
If you do want to change the location, here are a couple of suggestions.
(thanks to vagrant@freegeek.org):
These lines in fstab could allow you to bind-mount an alternate location
/dev/sdX1 /otherdrive ext3 defaults 0 2
/otherdrive/zoneminder/images /var/cache/zoneminder/images bind defaults 0 2
/otherdrive/zoneminder/events /var/cache/zoneminder/events bind defaults 0 2
or if you have a separate partition for each:
/dev/sdX1 /var/cache/zoneminder/images ext3 defaults 0 2
/dev/sdX2 /var/cache/zoneminder/events ext3 defaults 0 2
-- Peter Howard <pjh@northern-ridge.com.au>, Sun, 16 Jan 2010 01:35:51 +1100
ZoneMinder is now able to be configured to use an alternative location for storing
events and images at compile time. This package makes use of that, so symlinks in
/usr/share/zoneminder/www are no longer necessary.
Access to /dev/video*
---------------------

View File

@ -16,7 +16,7 @@ Build-Depends: debhelper (>= 9), dh-systemd, python-sphinx | python3-sphinx, apa
,libcurl4-gnutls-dev
,libgnutls-openssl-dev
,libjpeg8-dev | libjpeg9-dev | libjpeg62-turbo-dev
,default-libmysqlclient-dev | libmysqlclient-dev | libmariadbclient-dev
,default-libmysqlclient-dev | libmysqlclient-dev | libmariadbclient-dev-compat
,libpcre3-dev
,libpolkit-gobject-1-dev
,libv4l-dev (>= 0.8.3) [!hurd-any]
@ -39,7 +39,7 @@ Package: zoneminder
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends}, ${perl:Depends}
,javascript-common
,libmp4v2-2, libx264-142|libx264-148, libswscale-ffmpeg3|libswscale4|libswscale3
,libmp4v2-2, libx264-142|libx264-148|libx264-152, libswscale-ffmpeg3|libswscale4|libswscale3
,ffmpeg | libav-tools
,libdate-manip-perl, libmime-lite-perl, libmime-tools-perl
,libdbd-mysql-perl
@ -61,7 +61,7 @@ Depends: ${shlibs:Depends}, ${misc:Depends}, ${perl:Depends}
,libdigest-sha-perl
,libsys-cpu-perl, libsys-cpuload-perl, libsys-meminfo-perl
,libdata-uuid-perl
,mysql-client | virtual-mysql-client
,mysql-client | mariadb-client | virtual-mysql-client
,perl-modules
,php5-mysql | php-mysql, php5-gd | php-gd , php5-apcu | php-apcu , php-apc | php-apcu-bc
,policykit-1
@ -70,7 +70,7 @@ Depends: ${shlibs:Depends}, ${misc:Depends}, ${perl:Depends}
,libpcre3
Recommends: ${misc:Recommends}
,libapache2-mod-php5 | libapache2-mod-php | php5-fpm | php-fpm
,mysql-server | virtual-mysql-server
,mysql-server | mariadb-server | virtual-mysql-server
,zoneminder-doc (>= ${source:Version})
,ffmpeg
Suggests: fcgiwrap, logrotate

View File

@ -66,9 +66,6 @@ override_dh_fixperms:
chown root:www-data $(CURDIR)/debian/zoneminder/etc/zm/zm.conf
chmod 640 $(CURDIR)/debian/zoneminder/etc/zm/zm.conf
override_dh_installinit:
dh_installinit --no-start
override_dh_systemd_start:
dh_systemd_start --no-start

View File

@ -1,91 +0,0 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides: zoneminder
# Required-Start: $network $remote_fs $syslog
# Required-Stop: $network $remote_fs $syslog
# Should-Start: mysql
# Should-Stop: mysql
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Control ZoneMinder as a Service
# Description: ZoneMinder CCTV recording and surveillance system
### END INIT INFO
# chkconfig: 2345 20 20
# Source function library.
. /lib/lsb/init-functions
prog=ZoneMinder
ZM_PATH_BIN="/usr/bin"
RUNDIR="/var/run/zm"
TMPDIR="/tmp/zm"
command="$ZM_PATH_BIN/zmpkg.pl"
start() {
echo -n "Starting $prog: "
export TZ=:/etc/localtime
mkdir -p "$RUNDIR" && chown www-data:www-data "$RUNDIR"
mkdir -p "$TMPDIR" && chown www-data:www-data "$TMPDIR"
$command start
RETVAL=$?
[ $RETVAL = 0 ] && echo success
[ $RETVAL != 0 ] && echo failure
echo
[ $RETVAL = 0 ] && touch /var/lock/zm
return $RETVAL
}
stop() {
echo -n "Stopping $prog: "
#
# Why is this status check being done?
# as $command stop returns 1 if zoneminder
# is stopped, which will result in
# this returning 1, which will stuff
# dpkg when it tries to stop zoneminder before
# uninstalling . . .
#
result=`$command status`
if [ ! "$result" = "running" ]; then
echo "Zoneminder already stopped"
echo
RETVAL=0
else
$command stop
RETVAL=$?
[ $RETVAL = 0 ] && echo success
[ $RETVAL != 0 ] && echo failure
echo
[ $RETVAL = 0 ] && rm -f /var/lock/zm
fi
}
status() {
result=`$command status`
if [ "$result" = "running" ]; then
echo "ZoneMinder is running"
RETVAL=0
else
echo "ZoneMinder is stopped"
RETVAL=1
fi
}
case "$1" in
'start')
start
;;
'stop')
stop
;;
'restart' | 'force-reload')
stop
start
;;
'status')
status
;;
*)
echo "Usage: $0 { start | stop | restart | status }"
RETVAL=1
;;
esac
exit $RETVAL

View File

@ -5,9 +5,9 @@ set -e
if [ "$1" = "configure" ]; then
. /etc/zm/zm.conf
for i in /etc/zm/conf.d/*.conf; do
. $i
done;
for CONFFILE in /etc/zm/conf.d/*.conf; do
. "$CONFFILE"
done
# The logs can contain passwords, etc... so by setting group root, only www-data can read them, not people in the www-data group
chown www-data:root /var/log/zm
@ -15,22 +15,39 @@ if [ "$1" = "configure" ]; then
if [ -z "$2" ]; then
chown www-data:www-data /var/cache/zoneminder /var/cache/zoneminder/* /usr/share/zoneminder/www/cache
fi
if [ ! -e "/etc/apache2/mods-enabled/cgi.load" ]; then
if [ ! -e "/etc/apache2/mods-enabled/cgi.load" ] && [ "$(command -v a2enmod)" != "" ]; then
echo "The cgi module is not enabled in apache2. I am enabling it using a2enmod cgi."
a2enmod cgi
fi
if [ "$ZM_DB_HOST" = "localhost" ]; then
if [ -e "/etc/init.d/mysql" ]; then
# Do this every time the package is installed or upgraded
if [ -e "/lib/systemd/system/mysql.service" ] || [ -e "/lib/systemd/system/mariadb.service" ]; then
# Ensure zoneminder is stopped
deb-systemd-invoke stop zoneminder.service || exit $?
# Get mysql started if it isn't running
#
# Get mysql started if it isn't
#
if $(/etc/init.d/mysql status >/dev/null 2>&1); then
$(systemctl status mysql.service >/dev/null 2>&1); MYSQL_STATUS=$?
$(systemctl status mariadb.service >/dev/null 2>&1); MARIADB_STATUS=$?
# 3 = inactive, 4 = nonexistant
if [ "$MARIADB_STATUS" != "4" ]; then
DBSERVICE="mariadb.service"
else
DBSERVICE="mysql.service"
fi
if [ "$MYSQL_STATUS" != "0" ] && [ "$MARIADB_STATUS" != "0" ]; then
# 3 = inactive, 4 = nonexistant
# Due to /etc/init.d service autogeneration, mysql.service always returns the status of mariadb.service
# However, mariadb.service will not return the status of mysql.service.
deb-systemd-invoke start $DBSERVICE
fi
# Make sure systemctl status exit code is 0; i.e. the DB is running
if systemctl status "$DBSERVICE" >/dev/null 2>&1; then
mysqladmin --defaults-file=/etc/mysql/debian.cnf -f reload
# test if database if already present...
if ! $(echo quit | mysql --defaults-file=/etc/mysql/debian.cnf zm > /dev/null 2> /dev/null) ; then
@ -39,26 +56,19 @@ if [ "$1" = "configure" ]; then
echo "grant lock tables,alter,drop,select,insert,update,delete,create,index,alter routine,create routine, trigger,execute on ${ZM_DB_NAME}.* to '${ZM_DB_USER}'@localhost identified by \"${ZM_DB_PASS}\";" | mysql --defaults-file=/etc/mysql/debian.cnf mysql
else
echo "grant lock tables,alter,drop,select,insert,update,delete,create,index,alter routine,create routine, trigger,execute on ${ZM_DB_NAME}.* to '${ZM_DB_USER}'@localhost;" | mysql --defaults-file=/etc/mysql/debian.cnf mysql
fi
zmupdate.pl --nointeractive
zmupdate.pl --nointeractive -f
# Add any new PTZ control configurations to the database (will not overwrite)
zmcamtool.pl --import >/dev/null 2>&1
else
echo 'NOTE: mysql not running, please start mysql and run dpkg-reconfigure zoneminder when it is running.'
echo 'NOTE: MySQL/MariaDB not running; please start mysql and run dpkg-reconfigure zoneminder when it is running.'
fi
else
echo 'mysql not found, assuming remote server.'
echo 'MySQL/MariaDB not found; assuming remote server.'
fi
else
echo "Not doing database upgrade due to remote db server ($ZM_DB_HOST)"
echo "Not doing database upgrade due to remote db server ($ZM_DB_HOST)."
fi
echo "Done Updating, starting ZoneMinder"
deb-systemd-invoke restart zoneminder.service || exit $?
echo "Done Updating; starting ZoneMinder."
deb-systemd-invoke restart zoneminder.service
fi

View File

@ -0,0 +1,39 @@
Dedicated Drive, Partition, or Network Share
============================================
One of the first steps the end user must perform after installing ZoneMinder is to dedicate an entire partition, drive, or network share for ZoneMinder's event storage.
The reason being, ZoneMinder will, by design, fill up your hard disk, and you don't want to do that to your root volume!
The following steps apply to ZoneMinder 1.31 or newer, running on a typical Linux system, which uses systemd.
If you are using an older version of ZoneMinder, please follow the legacy steps in the `ZoneMinder Wiki <https://wiki.zoneminder.com/Using_a_dedicated_Hard_Drive>`_.
**Step 1:** Stop ZoneMinder
::
sudo systemctl stop zoneminder
**Step 2:** Mount your dedicated drive, partition, or network share to the local filesystem in any folder of your choosing.
We recommend you use systemd to manage the mount points.
Instructions on how to accomplish this can be found `here <https://zoneminder.blogspot.com/p/blog-page.html>`_ and `here <https://wiki.zoneminder.com/Common_Issues_with_Zoneminder_Installation_on_Ubuntu#Use_Systemd_to_Mount_Internal_Drive_or_NAS>`_.
Note that bind mounting ZoneMinder's images folder is optional. Newer version of ZoneMinder write very little, if anything, to the images folder.
Verify the dedicated drive, partition, or network share is successfully mounted before proceeding to the next step.
**Step 3:** Set the owner and group to that of the web server user account. Debian based distros typically use "www-data" as the web server user account while many rpm based distros use "apache".
::
sudo chown -R apache:apache /path/to/your/zoneminder/events/folder
sudo chown -R apache:apache /path/to/your/zoneminder/images/folder
Recall from the previous step, the images folder is optional.
**Step 4:** Create a config file under /etc/zm/conf.d using your favorite text editor. Name the file anything you want just as long as it ends in ".conf".
Add the following content to the file and save your changes:
::
ZM_DIR_EVENTS=/full/path/to/the/events/folder
ZM_DIR_IMAGES=/full/path/to/the/images/folder
**Step 5:** Start ZoneMinder and inspect the ZoneMinder log files for errors.
::
sudo systemctl start zoneminder

View File

@ -11,3 +11,4 @@ Contents:
debian
redhat
multiserver
dedicateddrive

View File

@ -0,0 +1,195 @@
# ==========================================================================
#
# ZoneMinder D-Link DCS-3415 IP Control Protocol Module, 2018-03-04, 0.1
# Copyright (C) 2015-2018 Habib Kamei
#
# Modified for use with D-Link DCS-3415 IP Camera by Habib Kamei
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
#
# ==========================================================================
#
# This module contains the implementation of the D-Link DCS-3415 device control protocol
#
#===========================================================================
package ZoneMinder::Control::DCS3415;
use 5.006;
use strict;
use warnings;
require ZoneMinder::Base;
require ZoneMinder::Control;
our @ISA = qw(ZoneMinder::Control);
# ==========================================================================
#
# D-Link DCS-3415 Control Protocol
#
# On ControlAddress use the format :
# USERNAME:PASSWORD@ADDRESS:PORT
# eg : admin:@10.1.2.1:80
# zoneuser:zonepass@192.168.0.20:40000
#
# ==========================================================================
use ZoneMinder::Logger qw(:all);
use ZoneMinder::Config qw(:all);
use Time::HiRes qw( usleep );
sub new
{
my $class = shift;
my $id = shift;
my $self = ZoneMinder::Control->new( $id );
bless( $self, $class );
srand( time() );
return $self;
}
our $AUTOLOAD;
sub AUTOLOAD
{
my $self = shift;
my $class = ref( ) || croak( "$self not object" );
my $name = $AUTOLOAD;
$name =~ s/.*://;
if ( exists($self->{$name}) )
{
return( $self->{$name} );
}
Fatal( "Can't access $name member of object of class $class" );
}
sub open
{
my $self = shift;
$self->loadMonitor();
use LWP::UserAgent;
$self->{ua} = LWP::UserAgent->new;
$self->{ua}->agent( "ZoneMinder Control Agent/".ZoneMinder::Base::ZM_VERSION );
$self->{state} = 'open';
}
sub close
{
my $self = shift;
$self->{state} = 'closed';
}
sub printMsg
{
my $self = shift;
my $msg = shift;
my $msg_len = length($msg);
Debug( $msg."[".$msg_len."]" );
}
sub sendCmd
{
my $self = shift;
my $cmd = shift;
my $result = undef;
printMsg( $cmd, "Tx" );
my $req = HTTP::Request->new( GET=>"http://".$self->{Monitor}->{ControlAddress}."/cgi-bin/viewer/$cmd" );
my $res = $self->{ua}->request($req);
if ( $res->is_success )
{
$result = !undef;
}
else
{
Error( "Error check failed:'".$res->status_line()."'" );
}
return( $result );
}
#Zoom In
sub Tele
{
my $self = shift;
Debug( "Zoom Tele" );
my $cmd = "camctrl.cgi?channel=0&camid=1&zoom=tele";
$self->sendCmd( $cmd );
}
#Zoom Out
sub Wide
{
my $self = shift;
Debug( "Zoom Wide" );
my $cmd = "camctrl.cgi?channel=0&camid=1&zoom=wide";
$self->sendCmd( $cmd );
}
#Focus Near
sub Near
{
my $self = shift;
Debug( "Focus Near" );
my $cmd = "camctrl.cgi?channel=0&camid=1&focus=near";
$self->sendCmd( $cmd );
}
#Focus Far
sub Far
{
my $self = shift;
Debug( "Focus Far" );
my $cmd = "camctrl.cgi?channel=0&camid=1&focus=far";
$self->sendCmd( $cmd );
}
1;
__END__
# Below is stub documentation for your module. You'd better edit it!
=head1 NAME
ZoneMinder::Database - Perl extension for blah blah blah
=head1 SYNOPSIS
use ZoneMinder::Database;
blah blah blah
=head1 DESCRIPTION
Stub documentation for ZoneMinder, created by h2xs. It looks like the
author of the extension was negligent enough to leave the stub
unedited.
Blah blah blah.
=head2 EXPORT
None by default.
=head1 SEE ALSO
Mention other useful documentation such as the documentation of
related modules or operating system documentation (such as man pages
in UNIX), or any relevant external documentation such as RFCs or
standards.
If you have a mailing list set up for your module, mention it here.
If you have a web site set up for your module, mention it here.
=head1 AUTHOR
Philip Coombes, E<lt>philip.coombes@zoneminder.comE<gt>
=head1 COPYRIGHT AND LICENSE
Copyright (C) 2001-2008 Philip Coombes
This library is free software; you can redistribute it and/or modify
it under the same terms as Perl itself, either Perl version 5.8.3 or,
at your option, any later version of Perl 5 you may have available.
=cut

View File

@ -300,8 +300,8 @@ sub GenerateVideo {
$frame_rate = $fps;
}
my $width = $self->{MonitorWidth};
my $height = $self->{MonitorHeight};
my $width = $self->{Width};
my $height = $self->{Height};
my $video_size = " ${width}x${height}";
if ( $scale ) {

View File

@ -166,6 +166,8 @@ our $mem_data = {
last_write_time => { type=>'time_t64', seq=>$mem_seq++ },
last_read_time => { type=>'time_t64', seq=>$mem_seq++ },
control_state => { type=>'uint8[256]', seq=>$mem_seq++ },
alarm_cause => { type=>'int8[256]', seq=>$mem_seq++ },
}
},
trigger_data => { type=>'TriggerData', seq=>$mem_seq++, 'contents'=> {
@ -315,6 +317,12 @@ sub zmMemRead {
my $type = $mem_data->{$section}->{contents}->{$element}->{type};
my $size = $mem_data->{$section}->{contents}->{$element}->{size};
if (!defined $offset || !defined $type || !defined $size) {
Error ("Invalid field:".$field." setting to undef and exiting zmMemRead");
zmMemInvalidate( $monitor );
return( undef );
}
my $data = zmMemGet( $monitor, $offset, $size );
if ( !defined($data) ) {
Error( "Unable to read '$field' from memory for monitor ".$monitor->{Id} );
@ -820,6 +828,7 @@ colour Read/write location for the current monitor colour
contrast Read/write location for the current monitor contrast
alarm_x Image x co-ordinate (from left) of the centre of the last motion event, -1 if none
alarm_y Image y co-ordinate (from top) of the centre of the last motion event, -1 if none
alarm_cause The current alarm event cause string along with zone names(s) alarmed
trigger_data The triggered event mapped memory section
size The size, in bytes of this section

View File

@ -197,8 +197,6 @@ my $sql = " SELECT (SELECT max(Delta) FROM Frames WHERE EventId=Events.Id)-(SELE
Events.*,
unix_timestamp(Events.StartTime) as Time,
M.Name as MonitorName,
M.Width as MonitorWidth,
M.Height as MonitorHeight,
M.Palette
FROM Events
INNER JOIN Monitors as M on Events.MonitorId = M.Id

View File

@ -453,6 +453,7 @@ Monitor::Monitor(
shared_data->alarm_y = -1;
shared_data->format = camera->SubpixelOrder();
shared_data->imagesize = camera->ImageSize();
shared_data->alarm_cause[0] = 0;
trigger_data->size = sizeof(TriggerData);
trigger_data->trigger_state = TRIGGER_CANCEL;
trigger_data->trigger_score = 0;
@ -1567,6 +1568,18 @@ bool Monitor::Analyse() {
event = new Event( this, *(image_buffer[pre_index].timestamp), cause, noteSetMap );
}
shared_data->last_event = event->Id();
// lets construct alarm cause. It will contain cause + names of zones alarmed
std::string alarm_cause="";
for ( int i=0; i < n_zones; i++) {
if (zones[i]->Alarmed()) {
alarm_cause += std::string(zones[i]->Label());
if (i < n_zones-1) {
alarm_cause +=",";
}
}
}
alarm_cause = cause+" "+alarm_cause;
strncpy( shared_data->alarm_cause,alarm_cause.c_str() , sizeof(shared_data->alarm_cause) );
//set up video store data
snprintf(video_store_data->event_file, sizeof(video_store_data->event_file), "%s", event->getEventFile());
video_store_data->recording = event->StartTime();

View File

@ -145,6 +145,8 @@ protected:
};
uint8_t control_state[256]; /* +88 */
char alarm_cause[256];
} SharedData;
typedef enum { TRIGGER_CANCEL, TRIGGER_ON, TRIGGER_OFF } TriggerState;

View File

@ -1,4 +1,3 @@
<?php
App::uses('AppModel', 'Model');

View File

@ -474,6 +474,7 @@ if ( canEdit( 'Monitors' ) ) {
'Exif' => 'toggle',
'RTSPDescribe' => 'toggle',
'RecordAudio' => 'toggle',
'Method' => 'raw',
);
if ( $_REQUEST['newMonitor']['ServerId'] == 'auto' ) {

View File

@ -700,7 +700,7 @@ function getFormChanges( $values, $newValues, $types=false, $columns=false ) {
if ( empty($value) ) {
$changes[$key] = "$key = 0";
} else {
$changes[$key] = "$key = 0";
$changes[$key] = "$key = 1";
//$changes[$key] = $key . ' = '.dbEscape(trim($value));
}
}