Added DUMP_CORES option.
git-svn-id: http://svn.zoneminder.com/svn/zm/trunk@2639 e3e1d417-86f3-4887-817a-d78f3d33393f
This commit is contained in:
stan
parent
43a1802b90
commit
435c469d4b
|
|
@ -775,64 +775,65 @@ insert into Config set Id = 115, Name = 'ZM_OPT_TRIGGERS', Value = '0', Type = '
|
||||||
insert into Config set Id = 116, Name = 'ZM_CHECK_FOR_UPDATES', Value = '1', Type = 'boolean', DefaultValue = 'yes', Hint = 'yes|no', Pattern = '(?i-xsm:^([yn]))', Format = ' ($1 =~ /^y/) ? \"yes\" : \"no\" ', Prompt = 'Whether to check with zoneminder.com for updated versions', Help = 'From ZoneMinder version 1.17.0 onwards new versions are expected to be more frequent. To save checking manually for each new version ZoneMinder can check with the zoneminder.com website to determine the most recent release. These checks are infrequent, about once per week, and no personal or system information is transmitted other than your current version number. If you do not wish these checks to take place or your ZoneMinder system has no internet access you can switch these check off with this configuration variable', Category = 'system', Readonly = '0', Requires = '';
|
insert into Config set Id = 116, Name = 'ZM_CHECK_FOR_UPDATES', Value = '1', Type = 'boolean', DefaultValue = 'yes', Hint = 'yes|no', Pattern = '(?i-xsm:^([yn]))', Format = ' ($1 =~ /^y/) ? \"yes\" : \"no\" ', Prompt = 'Whether to check with zoneminder.com for updated versions', Help = 'From ZoneMinder version 1.17.0 onwards new versions are expected to be more frequent. To save checking manually for each new version ZoneMinder can check with the zoneminder.com website to determine the most recent release. These checks are infrequent, about once per week, and no personal or system information is transmitted other than your current version number. If you do not wish these checks to take place or your ZoneMinder system has no internet access you can switch these check off with this configuration variable', Category = 'system', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 117, Name = 'ZM_UPDATE_CHECK_PROXY', Value = '', Type = 'string', DefaultValue = '', Hint = 'string', Pattern = '(?-xism:^(.+)$)', Format = ' $1 ', Prompt = 'Proxy url if required to access zoneminder.com', Help = 'If you use a proxy to access the internet then ZoneMinder needs to know so it can access zoneminder.com to check for updates. If you do use a proxy enter the full proxy url here in the form of http://<proxy host>:<proxy port>/', Category = 'system', Readonly = '0', Requires = '';
|
insert into Config set Id = 117, Name = 'ZM_UPDATE_CHECK_PROXY', Value = '', Type = 'string', DefaultValue = '', Hint = 'string', Pattern = '(?-xism:^(.+)$)', Format = ' $1 ', Prompt = 'Proxy url if required to access zoneminder.com', Help = 'If you use a proxy to access the internet then ZoneMinder needs to know so it can access zoneminder.com to check for updates. If you do use a proxy enter the full proxy url here in the form of http://<proxy host>:<proxy port>/', Category = 'system', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 118, Name = 'ZM_SHM_KEY', Value = '0x7a6d0000', Type = 'hexadecimal', DefaultValue = '0x7a6d0000', Hint = 'hexadecimal', Pattern = '(?-xism:^(?:0x)?([0-9a-f]{1,8})$)', Format = ' \"0x\".$1 ', Prompt = 'Shared memory root key to use', Help = 'ZoneMinder uses shared memory to speed up communication between modules. To identify the right area to use shared memory keys are used. This option controls what the base key is, each monitor will have it\'s Id or\'ed with this to get the actual key used. You will not normally need to change this value unless it clashes with another instance of ZoneMinder on the same machine. Only the first four hex digits are used, the lower four will be masked out and ignored.', Category = 'system', Readonly = '0', Requires = '';
|
insert into Config set Id = 118, Name = 'ZM_SHM_KEY', Value = '0x7a6d0000', Type = 'hexadecimal', DefaultValue = '0x7a6d0000', Hint = 'hexadecimal', Pattern = '(?-xism:^(?:0x)?([0-9a-f]{1,8})$)', Format = ' \"0x\".$1 ', Prompt = 'Shared memory root key to use', Help = 'ZoneMinder uses shared memory to speed up communication between modules. To identify the right area to use shared memory keys are used. This option controls what the base key is, each monitor will have it\'s Id or\'ed with this to get the actual key used. You will not normally need to change this value unless it clashes with another instance of ZoneMinder on the same machine. Only the first four hex digits are used, the lower four will be masked out and ignored.', Category = 'system', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 119, Name = 'ZM_WEB_REFRESH_METHOD', Value = 'javascript', Type = 'string', DefaultValue = 'javascript', Hint = 'javascript|http', Pattern = '(?i-xsm:^([jh]))', Format = ' $1 =~ /^j/ ? \"javascript\" : \"http\" ', Prompt = 'What method windows should use to refresh themselves', Help = 'Many windows in Javascript need to refresh themselves to keep their information current. This option determines what method they should use to do this. Choosing \'javascript\' means that each window will have a short JavaScript statement in with a timer to prompt the refresh. This is the most compatible method. Choosing \'http\' means the refresh instruction is put in the HTTP header. This is a cleaner method but refreshes are interrupted or cancelled when a link in the window is clicked meaning that the window will no longer refresh and this would have to be done manually.', Category = 'web', Readonly = '0', Requires = '';
|
insert into Config set Id = 119, Name = 'ZM_DUMP_CORES', Value = '0', Type = 'boolean', DefaultValue = 'no', Hint = 'yes|no', Pattern = '(?i-xsm:^([yn]))', Format = ' ($1 =~ /^y/) ? \"yes\" : \"no\" ', Prompt = 'Whether to create core files un unexpected process failure.', Help = 'When an unrecoverable error occurs in a ZoneMinder binary process is has traditionally been trapped and the details written to logs to aid in remote analysis. However in some cases it is easier to diagnose the error if a core file, which is a memory dump of the process at the time of the error, is created. This can be interactively analysed in the debugger and may reveal more or better information than that available from the logs. This option is recommended for advanced users only otherwise leave at the default. Note using this option to trigger core files will mean that there will be no indication in the binary logs that a process has died, they will just stop, however the zmdc log will still contain an entry. Also note that you may have to explicitly enable core file creation on your system via the \'ulimit -c\' command or other means otherwise no file will be created regardless of the value of this option.', Category = 'system', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 120, Name = 'ZM_WEB_EVENT_SORT_FIELD', Value = 'DateTime', Type = 'string', DefaultValue = 'DateTime', Hint = 'Id|Name|Cause|MonitorName|DateTime|Length|Frames|AlarmFrames|TotScore|AvgScore|MaxScore', Pattern = '(?-xism:.)', Format = ' $1 ', Prompt = 'Default field the event lists are sorted by', Help = 'Events in lists can be initially ordered in any way you want. This option controls what field is used to sort them. You can modify this ordering from filters or by clicking on headings in the lists themselves. Bear in mind however that the \'Prev\' and \'Next\' links, when scrolling through events, relate to the ordering in the lists and so not always to time based ordering.', Category = 'web', Readonly = '0', Requires = '';
|
insert into Config set Id = 120, Name = 'ZM_WEB_REFRESH_METHOD', Value = 'javascript', Type = 'string', DefaultValue = 'javascript', Hint = 'javascript|http', Pattern = '(?i-xsm:^([jh]))', Format = ' $1 =~ /^j/ ? \"javascript\" : \"http\" ', Prompt = 'What method windows should use to refresh themselves', Help = 'Many windows in Javascript need to refresh themselves to keep their information current. This option determines what method they should use to do this. Choosing \'javascript\' means that each window will have a short JavaScript statement in with a timer to prompt the refresh. This is the most compatible method. Choosing \'http\' means the refresh instruction is put in the HTTP header. This is a cleaner method but refreshes are interrupted or cancelled when a link in the window is clicked meaning that the window will no longer refresh and this would have to be done manually.', Category = 'web', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 121, Name = 'ZM_WEB_EVENT_SORT_ORDER', Value = 'asc', Type = 'string', DefaultValue = 'asc', Hint = 'asc|desc', Pattern = '(?i-xsm:^([ad]))', Format = ' $1 =~ /^a/i ? \"asc\" : \"desc\" ', Prompt = 'Default order the event lists are sorted by', Help = 'Events in lists can be initially ordered in any way you want. This option controls what order (ascending or descending) is used to sort them. You can modify this ordering from filters or by clicking on headings in the lists themselves. Bear in mind however that the \'Prev\' and \'Next\' links, when scrolling through events, relate to the ordering in the lists and so not always to time based ordering.', Category = 'web', Readonly = '0', Requires = '';
|
insert into Config set Id = 121, Name = 'ZM_WEB_EVENT_SORT_FIELD', Value = 'DateTime', Type = 'string', DefaultValue = 'DateTime', Hint = 'Id|Name|Cause|MonitorName|DateTime|Length|Frames|AlarmFrames|TotScore|AvgScore|MaxScore', Pattern = '(?-xism:.)', Format = ' $1 ', Prompt = 'Default field the event lists are sorted by', Help = 'Events in lists can be initially ordered in any way you want. This option controls what field is used to sort them. You can modify this ordering from filters or by clicking on headings in the lists themselves. Bear in mind however that the \'Prev\' and \'Next\' links, when scrolling through events, relate to the ordering in the lists and so not always to time based ordering.', Category = 'web', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 122, Name = 'ZM_WEB_EVENTS_PER_PAGE', Value = '25', Type = 'integer', DefaultValue = '25', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How many events to list per page in paged mode', Help = 'In the event list view you can either list all events or just a page at a time. This option controls how many events are listed per page in paged mode and how often to repeat the column headers in non-paged mode.', Category = 'web', Readonly = '0', Requires = '';
|
insert into Config set Id = 122, Name = 'ZM_WEB_EVENT_SORT_ORDER', Value = 'asc', Type = 'string', DefaultValue = 'asc', Hint = 'asc|desc', Pattern = '(?i-xsm:^([ad]))', Format = ' $1 =~ /^a/i ? \"asc\" : \"desc\" ', Prompt = 'Default order the event lists are sorted by', Help = 'Events in lists can be initially ordered in any way you want. This option controls what order (ascending or descending) is used to sort them. You can modify this ordering from filters or by clicking on headings in the lists themselves. Bear in mind however that the \'Prev\' and \'Next\' links, when scrolling through events, relate to the ordering in the lists and so not always to time based ordering.', Category = 'web', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 123, Name = 'ZM_WEB_LIST_THUMBS', Value = '0', Type = 'boolean', DefaultValue = 'no', Hint = 'yes|no', Pattern = '(?i-xsm:^([yn]))', Format = ' ($1 =~ /^y/) ? \"yes\" : \"no\" ', Prompt = 'Whether to display mini-thumbnails of event images in event lists', Help = 'Ordinarily the event lists just display text details of the events to save space and time. By switching this option on you can also display small thumbnails to help you identify events of interest. The size of these thumbnails is controlled by the following two options.', Category = 'web', Readonly = '0', Requires = '';
|
insert into Config set Id = 123, Name = 'ZM_WEB_EVENTS_PER_PAGE', Value = '25', Type = 'integer', DefaultValue = '25', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How many events to list per page in paged mode', Help = 'In the event list view you can either list all events or just a page at a time. This option controls how many events are listed per page in paged mode and how often to repeat the column headers in non-paged mode.', Category = 'web', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 124, Name = 'ZM_WEB_LIST_THUMB_WIDTH', Value = '48', Type = 'integer', DefaultValue = '48', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'The width of the thumbnails that appear in the event lists', Help = 'This options controls the width of the thumbnail images that appear in the event lists. It should be fairly small to fit in with the rest of the table. If you prefer you can specify a height instead in the next option but you should only use one of the width or height and the other option should be set to zero. If both width and height are specified then width will be used and height ignored.', Category = 'web', Readonly = '0', Requires = 'ZM_WEB_LIST_THUMBS=1';
|
insert into Config set Id = 124, Name = 'ZM_WEB_LIST_THUMBS', Value = '0', Type = 'boolean', DefaultValue = 'no', Hint = 'yes|no', Pattern = '(?i-xsm:^([yn]))', Format = ' ($1 =~ /^y/) ? \"yes\" : \"no\" ', Prompt = 'Whether to display mini-thumbnails of event images in event lists', Help = 'Ordinarily the event lists just display text details of the events to save space and time. By switching this option on you can also display small thumbnails to help you identify events of interest. The size of these thumbnails is controlled by the following two options.', Category = 'web', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 125, Name = 'ZM_WEB_LIST_THUMB_HEIGHT', Value = '0', Type = 'integer', DefaultValue = '0', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'The height of the thumbnails that appear in the event lists', Help = 'This options controls the height of the thumbnail images that appear in the event lists. It should be fairly small to fit in with the rest of the table. If you prefer you can specify a width instead in the previous option but you should only use one of the width or height and the other option should be set to zero. If both width and height are specified then width will be used and height ignored.', Category = 'web', Readonly = '0', Requires = 'ZM_WEB_LIST_THUMBS=1';
|
insert into Config set Id = 125, Name = 'ZM_WEB_LIST_THUMB_WIDTH', Value = '48', Type = 'integer', DefaultValue = '48', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'The width of the thumbnails that appear in the event lists', Help = 'This options controls the width of the thumbnail images that appear in the event lists. It should be fairly small to fit in with the rest of the table. If you prefer you can specify a height instead in the next option but you should only use one of the width or height and the other option should be set to zero. If both width and height are specified then width will be used and height ignored.', Category = 'web', Readonly = '0', Requires = 'ZM_WEB_LIST_THUMBS=1';
|
||||||
insert into Config set Id = 126, Name = 'ZM_WEB_USE_OBJECT_TAGS', Value = '1', Type = 'boolean', DefaultValue = 'yes', Hint = 'yes|no', Pattern = '(?i-xsm:^([yn]))', Format = ' ($1 =~ /^y/) ? \"yes\" : \"no\" ', Prompt = 'Whether to wrap embed in object tags for media content', Help = 'There are two methods of including media content in web pages. The most common way is use the EMBED tag which is able to give some indication of the type of content. However this is not a standard part of HTML. The official method is to use OBJECT tags which are able to give more information allowing the correct media viewers etc to be loaded. However these are less widely supported and content may be specifically tailored to a particular platform or player. This option controls whether media content is enclosed in EMBED tags only or whether, where appropriate, it is additionally wrapped in OBJECT tags. Currently OBJECT tags are only used in a limited number of circumstances but they may become more widespread in the future. It is suggested that you leave this option on unless you encounter problems playing some content.', Category = 'web', Readonly = '0', Requires = '';
|
insert into Config set Id = 126, Name = 'ZM_WEB_LIST_THUMB_HEIGHT', Value = '0', Type = 'integer', DefaultValue = '0', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'The height of the thumbnails that appear in the event lists', Help = 'This options controls the height of the thumbnail images that appear in the event lists. It should be fairly small to fit in with the rest of the table. If you prefer you can specify a width instead in the previous option but you should only use one of the width or height and the other option should be set to zero. If both width and height are specified then width will be used and height ignored.', Category = 'web', Readonly = '0', Requires = 'ZM_WEB_LIST_THUMBS=1';
|
||||||
insert into Config set Id = 127, Name = 'ZM_WEB_H_REFRESH_MAIN', Value = '300', Type = 'integer', DefaultValue = '300', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How often (in seconds) the main console window should refresh itself', Help = 'The main console window lists a general status and the event totals for all monitors. This is not a trivial task and should not be repeated too frequently or it may affect the performance of the rest of the system.', Category = 'highband', Readonly = '0', Requires = '';
|
insert into Config set Id = 127, Name = 'ZM_WEB_USE_OBJECT_TAGS', Value = '1', Type = 'boolean', DefaultValue = 'yes', Hint = 'yes|no', Pattern = '(?i-xsm:^([yn]))', Format = ' ($1 =~ /^y/) ? \"yes\" : \"no\" ', Prompt = 'Whether to wrap embed in object tags for media content', Help = 'There are two methods of including media content in web pages. The most common way is use the EMBED tag which is able to give some indication of the type of content. However this is not a standard part of HTML. The official method is to use OBJECT tags which are able to give more information allowing the correct media viewers etc to be loaded. However these are less widely supported and content may be specifically tailored to a particular platform or player. This option controls whether media content is enclosed in EMBED tags only or whether, where appropriate, it is additionally wrapped in OBJECT tags. Currently OBJECT tags are only used in a limited number of circumstances but they may become more widespread in the future. It is suggested that you leave this option on unless you encounter problems playing some content.', Category = 'web', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 128, Name = 'ZM_WEB_H_REFRESH_CYCLE', Value = '10', Type = 'integer', DefaultValue = '10', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How often (in seconds) the cycle watch window swaps to the next monitor', Help = 'The cycle watch window is a method of continuously cycling between images from all of your monitors. This option determines how often to refresh with a new image.', Category = 'highband', Readonly = '0', Requires = '';
|
insert into Config set Id = 128, Name = 'ZM_WEB_H_REFRESH_MAIN', Value = '300', Type = 'integer', DefaultValue = '300', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How often (in seconds) the main console window should refresh itself', Help = 'The main console window lists a general status and the event totals for all monitors. This is not a trivial task and should not be repeated too frequently or it may affect the performance of the rest of the system.', Category = 'highband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 129, Name = 'ZM_WEB_H_REFRESH_IMAGE', Value = '5', Type = 'integer', DefaultValue = '5', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How often (in seconds) the watched image is refreshed (if not streaming)', Help = 'The live images from a monitor can be viewed in either streamed or stills mode. This option determines how often a stills image is refreshed, it has no effect if streaming is selected.', Category = 'highband', Readonly = '0', Requires = '';
|
insert into Config set Id = 129, Name = 'ZM_WEB_H_REFRESH_CYCLE', Value = '10', Type = 'integer', DefaultValue = '10', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How often (in seconds) the cycle watch window swaps to the next monitor', Help = 'The cycle watch window is a method of continuously cycling between images from all of your monitors. This option determines how often to refresh with a new image.', Category = 'highband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 130, Name = 'ZM_WEB_H_REFRESH_STATUS', Value = '3', Type = 'integer', DefaultValue = '3', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How often (in seconds) the status refreshes itself in the watch window', Help = 'The monitor window is actually made from several frames. The one in the middle merely contains a monitor status which needs to refresh fairly frequently to give a true indication. This option determines that frequency.', Category = 'highband', Readonly = '0', Requires = '';
|
insert into Config set Id = 130, Name = 'ZM_WEB_H_REFRESH_IMAGE', Value = '5', Type = 'integer', DefaultValue = '5', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How often (in seconds) the watched image is refreshed (if not streaming)', Help = 'The live images from a monitor can be viewed in either streamed or stills mode. This option determines how often a stills image is refreshed, it has no effect if streaming is selected.', Category = 'highband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 131, Name = 'ZM_WEB_H_REFRESH_EVENTS', Value = '30', Type = 'integer', DefaultValue = '30', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How often (in seconds) the event listing is refreshed in the watch window', Help = 'The monitor window is actually made from several frames. The lower framme contains a listing of the last few events for easy access. This option determines how often this is refreshed.', Category = 'highband', Readonly = '0', Requires = '';
|
insert into Config set Id = 131, Name = 'ZM_WEB_H_REFRESH_STATUS', Value = '3', Type = 'integer', DefaultValue = '3', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How often (in seconds) the status refreshes itself in the watch window', Help = 'The monitor window is actually made from several frames. The one in the middle merely contains a monitor status which needs to refresh fairly frequently to give a true indication. This option determines that frequency.', Category = 'highband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 132, Name = 'ZM_WEB_H_DEFAULT_SCALE', Value = '100', Type = 'integer', DefaultValue = '100', Hint = '25|33|50|75|100|150|200|300|400', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'What the default scaling factor applied to \'live\' or \'event\' views is (%)', Help = 'Normally ZoneMinder will display \'live\' or \'event\' streams in their native size. However if you have monitors with large dimensions or a slow link you may prefer to reduce this size, alternatively for small monitors you can enlarge it. This options lets you specify what the default scaling factor will be. It is expressed as a percentage so 100 is normal size, 200 is double size etc.', Category = 'highband', Readonly = '0', Requires = '';
|
insert into Config set Id = 132, Name = 'ZM_WEB_H_REFRESH_EVENTS', Value = '30', Type = 'integer', DefaultValue = '30', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How often (in seconds) the event listing is refreshed in the watch window', Help = 'The monitor window is actually made from several frames. The lower framme contains a listing of the last few events for easy access. This option determines how often this is refreshed.', Category = 'highband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 133, Name = 'ZM_WEB_H_DEFAULT_RATE', Value = '100', Type = 'integer', DefaultValue = '100', Hint = '25|50|100|150|200|400|1000|2500|5000|10000', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'What the default replay rate factor applied to \'event\' views is (%)', Help = 'Normally ZoneMinder will display \'event\' streams at their native rate, i.e. as close to real-time as possible. However if you have long events it is often convenient to replay them at a faster rate for review. This option lets you specify what the default replay rate will be. It is expressed as a percentage so 100 is normal rate, 200 is double speed etc.', Category = 'highband', Readonly = '0', Requires = '';
|
insert into Config set Id = 133, Name = 'ZM_WEB_H_DEFAULT_SCALE', Value = '100', Type = 'integer', DefaultValue = '100', Hint = '25|33|50|75|100|150|200|300|400', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'What the default scaling factor applied to \'live\' or \'event\' views is (%)', Help = 'Normally ZoneMinder will display \'live\' or \'event\' streams in their native size. However if you have monitors with large dimensions or a slow link you may prefer to reduce this size, alternatively for small monitors you can enlarge it. This options lets you specify what the default scaling factor will be. It is expressed as a percentage so 100 is normal size, 200 is double size etc.', Category = 'highband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 134, Name = 'ZM_WEB_H_VIDEO_BITRATE', Value = '150000', Type = 'integer', DefaultValue = '150000', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'What the bitrate of the video encoded stream should be set to', Help = 'When encoding real video via the ffmpeg library a bit rate can be specified which roughly corresponds to the available bandwidth used for the stream. This setting effectively corresponds to a \'quality\' setting for the video. A low value will result in a blocky image whereas a high value will produce a clearer view. Note that this setting does not control the frame rate of the video however the quality of the video produced is affected both by this setting and the frame rate that the video is produced at. A higher frame rate at a particular bit rate result in individual frames being at a lower quality.', Category = 'highband', Readonly = '0', Requires = '';
|
insert into Config set Id = 134, Name = 'ZM_WEB_H_DEFAULT_RATE', Value = '100', Type = 'integer', DefaultValue = '100', Hint = '25|50|100|150|200|400|1000|2500|5000|10000', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'What the default replay rate factor applied to \'event\' views is (%)', Help = 'Normally ZoneMinder will display \'event\' streams at their native rate, i.e. as close to real-time as possible. However if you have long events it is often convenient to replay them at a faster rate for review. This option lets you specify what the default replay rate will be. It is expressed as a percentage so 100 is normal rate, 200 is double speed etc.', Category = 'highband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 135, Name = 'ZM_WEB_H_VIDEO_MAXFPS', Value = '15', Type = 'integer', DefaultValue = '15', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'What the maximum frame rate for streamed video should be', Help = 'When using streamed video the main control is the bitrate which determines how much data can be transmitted. However a lower bitrate at high frame rates results in a lower quality image. This option allows you to limit the maximum frame rate to ensure that video quality is maintained. An additional advantage is that encoding video at high frame rates is a processor intensive task when for the most part a very high frame rate offers little perceptible improvement over one that has a more manageable resource requirement. Note, this option is implemented as a cap beyond which binary reduction takes place. So if you have a device capturing at 15fps and set this option to 10fps then the video is not produced at 10fps, but rather at 7.5fps (15 divided by 2) as the final frame rate must be the original divided by a power of 2.', Category = 'highband', Readonly = '0', Requires = '';
|
insert into Config set Id = 135, Name = 'ZM_WEB_H_VIDEO_BITRATE', Value = '150000', Type = 'integer', DefaultValue = '150000', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'What the bitrate of the video encoded stream should be set to', Help = 'When encoding real video via the ffmpeg library a bit rate can be specified which roughly corresponds to the available bandwidth used for the stream. This setting effectively corresponds to a \'quality\' setting for the video. A low value will result in a blocky image whereas a high value will produce a clearer view. Note that this setting does not control the frame rate of the video however the quality of the video produced is affected both by this setting and the frame rate that the video is produced at. A higher frame rate at a particular bit rate result in individual frames being at a lower quality.', Category = 'highband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 136, Name = 'ZM_WEB_H_SCALE_THUMBS', Value = '0', Type = 'boolean', DefaultValue = 'no', Hint = 'yes|no', Pattern = '(?i-xsm:^([yn]))', Format = ' ($1 =~ /^y/) ? \"yes\" : \"no\" ', Prompt = 'Whether to scale thumbnails in events, bandwidth versus cpu in rescaling', Help = 'If unset, this option sends the whole image to the browser which resizes it in the window. If set the image is scaled down on the server before sending a reduced size image to the browser to conserve bandwidth at the cost of cpu on the server', Category = 'highband', Readonly = '0', Requires = 'ZM_PATH_NETPBM=/';
|
insert into Config set Id = 136, Name = 'ZM_WEB_H_VIDEO_MAXFPS', Value = '15', Type = 'integer', DefaultValue = '15', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'What the maximum frame rate for streamed video should be', Help = 'When using streamed video the main control is the bitrate which determines how much data can be transmitted. However a lower bitrate at high frame rates results in a lower quality image. This option allows you to limit the maximum frame rate to ensure that video quality is maintained. An additional advantage is that encoding video at high frame rates is a processor intensive task when for the most part a very high frame rate offers little perceptible improvement over one that has a more manageable resource requirement. Note, this option is implemented as a cap beyond which binary reduction takes place. So if you have a device capturing at 15fps and set this option to 10fps then the video is not produced at 10fps, but rather at 7.5fps (15 divided by 2) as the final frame rate must be the original divided by a power of 2.', Category = 'highband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 137, Name = 'ZM_WEB_H_USE_STREAMS', Value = '1', Type = 'boolean', DefaultValue = 'yes', Hint = 'yes|no', Pattern = '(?i-xsm:^([yn]))', Format = ' ($1 =~ /^y/) ? \"yes\" : \"no\" ', Prompt = 'Whether to use streaming or stills for live and events views', Help = 'Both the live and events views can use streaming to deliver a smoother feed. However over slow connections or in some other circumstances you can prefer to view stills instead. You can configure this globally with ZM_CAN_STREAM but this option allows you to modify your preference based on the bandwidth setting. Note that this option does not prevent you switching to streaming mode but just selects what the initial default setting is.', Category = 'highband', Readonly = '0', Requires = '';
|
insert into Config set Id = 137, Name = 'ZM_WEB_H_SCALE_THUMBS', Value = '0', Type = 'boolean', DefaultValue = 'no', Hint = 'yes|no', Pattern = '(?i-xsm:^([yn]))', Format = ' ($1 =~ /^y/) ? \"yes\" : \"no\" ', Prompt = 'Whether to scale thumbnails in events, bandwidth versus cpu in rescaling', Help = 'If unset, this option sends the whole image to the browser which resizes it in the window. If set the image is scaled down on the server before sending a reduced size image to the browser to conserve bandwidth at the cost of cpu on the server', Category = 'highband', Readonly = '0', Requires = 'ZM_PATH_NETPBM=/';
|
||||||
insert into Config set Id = 138, Name = 'ZM_WEB_H_EVENTS_VIEW', Value = 'events', Type = 'string', DefaultValue = 'events', Hint = 'events|timeline', Pattern = '(?i-xsm:^([lt]))', Format = ' $1 =~ /^e/ ? \"events\" : \"timeline\" ', Prompt = 'What the default view of multiple events should be.', Help = 'Stored events can be viewed in either an events list format or in a timeline based one. This option sets the default view that will be used. Choosing one view here does not prevent the other view being used as it will always be selectable from whichever view is currently being used.', Category = 'highband', Readonly = '0', Requires = '';
|
insert into Config set Id = 138, Name = 'ZM_WEB_H_USE_STREAMS', Value = '1', Type = 'boolean', DefaultValue = 'yes', Hint = 'yes|no', Pattern = '(?i-xsm:^([yn]))', Format = ' ($1 =~ /^y/) ? \"yes\" : \"no\" ', Prompt = 'Whether to use streaming or stills for live and events views', Help = 'Both the live and events views can use streaming to deliver a smoother feed. However over slow connections or in some other circumstances you can prefer to view stills instead. You can configure this globally with ZM_CAN_STREAM but this option allows you to modify your preference based on the bandwidth setting. Note that this option does not prevent you switching to streaming mode but just selects what the initial default setting is.', Category = 'highband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 139, Name = 'ZM_WEB_H_SHOW_PROGRESS', Value = '1', Type = 'boolean', DefaultValue = 'yes', Hint = 'yes|no', Pattern = '(?i-xsm:^([yn]))', Format = ' ($1 =~ /^y/) ? \"yes\" : \"no\" ', Prompt = 'Whether to show the progress of replay in event view.', Help = 'When viewing events an event navigation panel and progress bar is shown below the event itself. This allows you to jump to specific points in the event, but can can also dynamically update to display the current progress of the event replay itself. This progress is calculated from the actual event duration and is not directly linked to the replay itself, so on limited bandwidth connections may be out of step with the replay. This option allows you to turn off the progress display, whilst still keeping the navigation aspect, where bandwidth prevents it functioning effectively.', Category = 'highband', Readonly = '0', Requires = '';
|
insert into Config set Id = 139, Name = 'ZM_WEB_H_EVENTS_VIEW', Value = 'events', Type = 'string', DefaultValue = 'events', Hint = 'events|timeline', Pattern = '(?i-xsm:^([lt]))', Format = ' $1 =~ /^e/ ? \"events\" : \"timeline\" ', Prompt = 'What the default view of multiple events should be.', Help = 'Stored events can be viewed in either an events list format or in a timeline based one. This option sets the default view that will be used. Choosing one view here does not prevent the other view being used as it will always be selectable from whichever view is currently being used.', Category = 'highband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 140, Name = 'ZM_WEB_H_AJAX_TIMEOUT', Value = '3000', Type = 'integer', DefaultValue = '3000', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How long to wait for Ajax request responses (ms)', Help = 'The newer versions of the live feed and event views use Ajax to request information from the server and populate the views dynamically. This option allows you to specify a timeout if required after which requests are abandoned. A timeout may be necessary if requests would overwise hang such as on a slow connection. This would tend to consume a lot of browser memory and make the interface unresponsive. Ordinarily no requests should timeout so this setting should be set to a value greater than the slowest expected response. This value is in milliseconds but if set to zero then no timeout will be used.', Category = 'highband', Readonly = '0', Requires = '';
|
insert into Config set Id = 140, Name = 'ZM_WEB_H_SHOW_PROGRESS', Value = '1', Type = 'boolean', DefaultValue = 'yes', Hint = 'yes|no', Pattern = '(?i-xsm:^([yn]))', Format = ' ($1 =~ /^y/) ? \"yes\" : \"no\" ', Prompt = 'Whether to show the progress of replay in event view.', Help = 'When viewing events an event navigation panel and progress bar is shown below the event itself. This allows you to jump to specific points in the event, but can can also dynamically update to display the current progress of the event replay itself. This progress is calculated from the actual event duration and is not directly linked to the replay itself, so on limited bandwidth connections may be out of step with the replay. This option allows you to turn off the progress display, whilst still keeping the navigation aspect, where bandwidth prevents it functioning effectively.', Category = 'highband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 141, Name = 'ZM_WEB_M_REFRESH_MAIN', Value = '300', Type = 'integer', DefaultValue = '300', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How often (in seconds) the main console window should refresh itself', Help = 'The main console window lists a general status and the event totals for all monitors. This is not a trivial task and should not be repeated too frequently or it may affect the performance of the rest of the system.', Category = 'medband', Readonly = '0', Requires = '';
|
insert into Config set Id = 141, Name = 'ZM_WEB_H_AJAX_TIMEOUT', Value = '3000', Type = 'integer', DefaultValue = '3000', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How long to wait for Ajax request responses (ms)', Help = 'The newer versions of the live feed and event views use Ajax to request information from the server and populate the views dynamically. This option allows you to specify a timeout if required after which requests are abandoned. A timeout may be necessary if requests would overwise hang such as on a slow connection. This would tend to consume a lot of browser memory and make the interface unresponsive. Ordinarily no requests should timeout so this setting should be set to a value greater than the slowest expected response. This value is in milliseconds but if set to zero then no timeout will be used.', Category = 'highband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 142, Name = 'ZM_WEB_M_REFRESH_CYCLE', Value = '20', Type = 'integer', DefaultValue = '20', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How often (in seconds) the cycle watch window swaps to the next monitor', Help = 'The cycle watch window is a method of continuously cycling between images from all of your monitors. This option determines how often to refresh with a new image.', Category = 'medband', Readonly = '0', Requires = '';
|
insert into Config set Id = 142, Name = 'ZM_WEB_M_REFRESH_MAIN', Value = '300', Type = 'integer', DefaultValue = '300', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How often (in seconds) the main console window should refresh itself', Help = 'The main console window lists a general status and the event totals for all monitors. This is not a trivial task and should not be repeated too frequently or it may affect the performance of the rest of the system.', Category = 'medband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 143, Name = 'ZM_WEB_M_REFRESH_IMAGE', Value = '10', Type = 'integer', DefaultValue = '10', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How often (in seconds) the watched image is refreshed (if not streaming)', Help = 'The live images from a monitor can be viewed in either streamed or stills mode. This option determines how often a stills image is refreshed, it has no effect if streaming is selected.', Category = 'medband', Readonly = '0', Requires = '';
|
insert into Config set Id = 143, Name = 'ZM_WEB_M_REFRESH_CYCLE', Value = '20', Type = 'integer', DefaultValue = '20', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How often (in seconds) the cycle watch window swaps to the next monitor', Help = 'The cycle watch window is a method of continuously cycling between images from all of your monitors. This option determines how often to refresh with a new image.', Category = 'medband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 144, Name = 'ZM_WEB_M_REFRESH_STATUS', Value = '5', Type = 'integer', DefaultValue = '5', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How often (in seconds) the status refreshes itself in the watch window', Help = 'The monitor window is actually made from several frames. The one in the middle merely contains a monitor status which needs to refresh fairly frequently to give a true indication. This option determines that frequency.', Category = 'medband', Readonly = '0', Requires = '';
|
insert into Config set Id = 144, Name = 'ZM_WEB_M_REFRESH_IMAGE', Value = '10', Type = 'integer', DefaultValue = '10', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How often (in seconds) the watched image is refreshed (if not streaming)', Help = 'The live images from a monitor can be viewed in either streamed or stills mode. This option determines how often a stills image is refreshed, it has no effect if streaming is selected.', Category = 'medband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 145, Name = 'ZM_WEB_M_REFRESH_EVENTS', Value = '60', Type = 'integer', DefaultValue = '60', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How often (in seconds) the event listing is refreshed in the watch window', Help = 'The monitor window is actually made from several frames. The lower framme contains a listing of the last few events for easy access. This option determines how often this is refreshed.', Category = 'medband', Readonly = '0', Requires = '';
|
insert into Config set Id = 145, Name = 'ZM_WEB_M_REFRESH_STATUS', Value = '5', Type = 'integer', DefaultValue = '5', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How often (in seconds) the status refreshes itself in the watch window', Help = 'The monitor window is actually made from several frames. The one in the middle merely contains a monitor status which needs to refresh fairly frequently to give a true indication. This option determines that frequency.', Category = 'medband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 146, Name = 'ZM_WEB_M_DEFAULT_SCALE', Value = '100', Type = 'integer', DefaultValue = '100', Hint = '25|33|50|75|100|150|200|300|400', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'What the default scaling factor applied to \'live\' or \'event\' views is (%)', Help = 'Normally ZoneMinder will display \'live\' or \'event\' streams in their native size. However if you have monitors with large dimensions or a slow link you may prefer to reduce this size, alternatively for small monitors you can enlarge it. This options lets you specify what the default scaling factor will be. It is expressed as a percentage so 100 is normal size, 200 is double size etc.', Category = 'medband', Readonly = '0', Requires = '';
|
insert into Config set Id = 146, Name = 'ZM_WEB_M_REFRESH_EVENTS', Value = '60', Type = 'integer', DefaultValue = '60', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How often (in seconds) the event listing is refreshed in the watch window', Help = 'The monitor window is actually made from several frames. The lower framme contains a listing of the last few events for easy access. This option determines how often this is refreshed.', Category = 'medband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 147, Name = 'ZM_WEB_M_DEFAULT_RATE', Value = '100', Type = 'integer', DefaultValue = '100', Hint = '25|50|100|150|200|400|1000|2500|5000|10000', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'What the default replay rate factor applied to \'event\' views is (%)', Help = 'Normally ZoneMinder will display \'event\' streams at their native rate, i.e. as close to real-time as possible. However if you have long events it is often convenient to replay them at a faster rate for review. This option lets you specify what the default replay rate will be. It is expressed as a percentage so 100 is normal rate, 200 is double speed etc.', Category = 'medband', Readonly = '0', Requires = '';
|
insert into Config set Id = 147, Name = 'ZM_WEB_M_DEFAULT_SCALE', Value = '100', Type = 'integer', DefaultValue = '100', Hint = '25|33|50|75|100|150|200|300|400', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'What the default scaling factor applied to \'live\' or \'event\' views is (%)', Help = 'Normally ZoneMinder will display \'live\' or \'event\' streams in their native size. However if you have monitors with large dimensions or a slow link you may prefer to reduce this size, alternatively for small monitors you can enlarge it. This options lets you specify what the default scaling factor will be. It is expressed as a percentage so 100 is normal size, 200 is double size etc.', Category = 'medband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 148, Name = 'ZM_WEB_M_VIDEO_BITRATE', Value = '75000', Type = 'integer', DefaultValue = '75000', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'What the bitrate of the video encoded stream should be set to', Help = 'When encoding real video via the ffmpeg library a bit rate can be specified which roughly corresponds to the available bandwidth used for the stream. This setting effectively corresponds to a \'quality\' setting for the video. A low value will result in a blocky image whereas a high value will produce a clearer view. Note that this setting does not control the frame rate of the video however the quality of the video produced is affected both by this setting and the frame rate that the video is produced at. A higher frame rate at a particular bit rate result in individual frames being at a lower quality.', Category = 'medband', Readonly = '0', Requires = '';
|
insert into Config set Id = 148, Name = 'ZM_WEB_M_DEFAULT_RATE', Value = '100', Type = 'integer', DefaultValue = '100', Hint = '25|50|100|150|200|400|1000|2500|5000|10000', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'What the default replay rate factor applied to \'event\' views is (%)', Help = 'Normally ZoneMinder will display \'event\' streams at their native rate, i.e. as close to real-time as possible. However if you have long events it is often convenient to replay them at a faster rate for review. This option lets you specify what the default replay rate will be. It is expressed as a percentage so 100 is normal rate, 200 is double speed etc.', Category = 'medband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 149, Name = 'ZM_WEB_M_VIDEO_MAXFPS', Value = '10', Type = 'integer', DefaultValue = '10', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'What the maximum frame rate for streamed video should be', Help = 'When using streamed video the main control is the bitrate which determines how much data can be transmitted. However a lower bitrate at high frame rates results in a lower quality image. This option allows you to limit the maximum frame rate to ensure that video quality is maintained. An additional advantage is that encoding video at high frame rates is a processor intensive task when for the most part a very high frame rate offers little perceptible improvement over one that has a more manageable resource requirement. Note, this option is implemented as a cap beyond which binary reduction takes place. So if you have a device capturing at 15fps and set this option to 10fps then the video is not produced at 10fps, but rather at 7.5fps (15 divided by 2) as the final frame rate must be the original divided by a power of 2.', Category = 'medband', Readonly = '0', Requires = '';
|
insert into Config set Id = 149, Name = 'ZM_WEB_M_VIDEO_BITRATE', Value = '75000', Type = 'integer', DefaultValue = '75000', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'What the bitrate of the video encoded stream should be set to', Help = 'When encoding real video via the ffmpeg library a bit rate can be specified which roughly corresponds to the available bandwidth used for the stream. This setting effectively corresponds to a \'quality\' setting for the video. A low value will result in a blocky image whereas a high value will produce a clearer view. Note that this setting does not control the frame rate of the video however the quality of the video produced is affected both by this setting and the frame rate that the video is produced at. A higher frame rate at a particular bit rate result in individual frames being at a lower quality.', Category = 'medband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 150, Name = 'ZM_WEB_M_SCALE_THUMBS', Value = '1', Type = 'boolean', DefaultValue = 'yes', Hint = 'yes|no', Pattern = '(?i-xsm:^([yn]))', Format = ' ($1 =~ /^y/) ? \"yes\" : \"no\" ', Prompt = 'Whether to scale thumbnails in events, bandwidth versus cpu in rescaling', Help = 'If unset, this option sends the whole image to the browser which resizes it in the window. If set the image is scaled down on the server before sending a reduced size image to the browser to conserve bandwidth at the cost of cpu on the server', Category = 'medband', Readonly = '0', Requires = 'ZM_PATH_NETPBM=/';
|
insert into Config set Id = 150, Name = 'ZM_WEB_M_VIDEO_MAXFPS', Value = '10', Type = 'integer', DefaultValue = '10', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'What the maximum frame rate for streamed video should be', Help = 'When using streamed video the main control is the bitrate which determines how much data can be transmitted. However a lower bitrate at high frame rates results in a lower quality image. This option allows you to limit the maximum frame rate to ensure that video quality is maintained. An additional advantage is that encoding video at high frame rates is a processor intensive task when for the most part a very high frame rate offers little perceptible improvement over one that has a more manageable resource requirement. Note, this option is implemented as a cap beyond which binary reduction takes place. So if you have a device capturing at 15fps and set this option to 10fps then the video is not produced at 10fps, but rather at 7.5fps (15 divided by 2) as the final frame rate must be the original divided by a power of 2.', Category = 'medband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 151, Name = 'ZM_WEB_M_USE_STREAMS', Value = '1', Type = 'boolean', DefaultValue = 'yes', Hint = 'yes|no', Pattern = '(?i-xsm:^([yn]))', Format = ' ($1 =~ /^y/) ? \"yes\" : \"no\" ', Prompt = 'Whether to use streaming or stills for live and events views', Help = 'Both the live and events views can use streaming to deliver a smoother feed. However over slow connections or in some other circumstances you can prefer to view stills instead. You can configure this globally with ZM_CAN_STREAM but this option allows you to modify your preference based on the bandwidth setting. Note that this option does not prevent you switching to streaming mode but just selects what the initial default setting is.', Category = 'medband', Readonly = '0', Requires = '';
|
insert into Config set Id = 151, Name = 'ZM_WEB_M_SCALE_THUMBS', Value = '1', Type = 'boolean', DefaultValue = 'yes', Hint = 'yes|no', Pattern = '(?i-xsm:^([yn]))', Format = ' ($1 =~ /^y/) ? \"yes\" : \"no\" ', Prompt = 'Whether to scale thumbnails in events, bandwidth versus cpu in rescaling', Help = 'If unset, this option sends the whole image to the browser which resizes it in the window. If set the image is scaled down on the server before sending a reduced size image to the browser to conserve bandwidth at the cost of cpu on the server', Category = 'medband', Readonly = '0', Requires = 'ZM_PATH_NETPBM=/';
|
||||||
insert into Config set Id = 152, Name = 'ZM_WEB_M_EVENTS_VIEW', Value = 'events', Type = 'string', DefaultValue = 'events', Hint = 'events|timeline', Pattern = '(?i-xsm:^([lt]))', Format = ' $1 =~ /^e/ ? \"events\" : \"timeline\" ', Prompt = 'What the default view of multiple events should be.', Help = 'Stored events can be viewed in either an events list format or in a timeline based one. This option sets the default view that will be used. Choosing one view here does not prevent the other view being used as it will always be selectable from whichever view is currently being used.', Category = 'medband', Readonly = '0', Requires = '';
|
insert into Config set Id = 152, Name = 'ZM_WEB_M_USE_STREAMS', Value = '1', Type = 'boolean', DefaultValue = 'yes', Hint = 'yes|no', Pattern = '(?i-xsm:^([yn]))', Format = ' ($1 =~ /^y/) ? \"yes\" : \"no\" ', Prompt = 'Whether to use streaming or stills for live and events views', Help = 'Both the live and events views can use streaming to deliver a smoother feed. However over slow connections or in some other circumstances you can prefer to view stills instead. You can configure this globally with ZM_CAN_STREAM but this option allows you to modify your preference based on the bandwidth setting. Note that this option does not prevent you switching to streaming mode but just selects what the initial default setting is.', Category = 'medband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 153, Name = 'ZM_WEB_M_SHOW_PROGRESS', Value = '1', Type = 'boolean', DefaultValue = 'yes', Hint = 'yes|no', Pattern = '(?i-xsm:^([yn]))', Format = ' ($1 =~ /^y/) ? \"yes\" : \"no\" ', Prompt = 'Whether to show the progress of replay in event view.', Help = 'When viewing events an event navigation panel and progress bar is shown below the event itself. This allows you to jump to specific points in the event, but can can also dynamically update to display the current progress of the event replay itself. This progress is calculated from the actual event duration and is not directly linked to the replay itself, so on limited bandwidth connections may be out of step with the replay. This option allows you to turn off the progress display, whilst still keeping the navigation aspect, where bandwidth prevents it functioning effectively.', Category = 'medband', Readonly = '0', Requires = '';
|
insert into Config set Id = 153, Name = 'ZM_WEB_M_EVENTS_VIEW', Value = 'events', Type = 'string', DefaultValue = 'events', Hint = 'events|timeline', Pattern = '(?i-xsm:^([lt]))', Format = ' $1 =~ /^e/ ? \"events\" : \"timeline\" ', Prompt = 'What the default view of multiple events should be.', Help = 'Stored events can be viewed in either an events list format or in a timeline based one. This option sets the default view that will be used. Choosing one view here does not prevent the other view being used as it will always be selectable from whichever view is currently being used.', Category = 'medband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 154, Name = 'ZM_WEB_M_AJAX_TIMEOUT', Value = '5000', Type = 'integer', DefaultValue = '5000', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How long to wait for Ajax request responses (ms)', Help = 'The newer versions of the live feed and event views use Ajax to request information from the server and populate the views dynamically. This option allows you to specify a timeout if required after which requests are abandoned. A timeout may be necessary if requests would overwise hang such as on a slow connection. This would tend to consume a lot of browser memory and make the interface unresponsive. Ordinarily no requests should timeout so this setting should be set to a value greater than the slowest expected response. This value is in milliseconds but if set to zero then no timeout will be used.', Category = 'medband', Readonly = '0', Requires = '';
|
insert into Config set Id = 154, Name = 'ZM_WEB_M_SHOW_PROGRESS', Value = '1', Type = 'boolean', DefaultValue = 'yes', Hint = 'yes|no', Pattern = '(?i-xsm:^([yn]))', Format = ' ($1 =~ /^y/) ? \"yes\" : \"no\" ', Prompt = 'Whether to show the progress of replay in event view.', Help = 'When viewing events an event navigation panel and progress bar is shown below the event itself. This allows you to jump to specific points in the event, but can can also dynamically update to display the current progress of the event replay itself. This progress is calculated from the actual event duration and is not directly linked to the replay itself, so on limited bandwidth connections may be out of step with the replay. This option allows you to turn off the progress display, whilst still keeping the navigation aspect, where bandwidth prevents it functioning effectively.', Category = 'medband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 155, Name = 'ZM_WEB_L_REFRESH_MAIN', Value = '300', Type = 'integer', DefaultValue = '300', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How often (in seconds) the main console window should refresh itself', Help = 'The main console window lists a general status and the event totals for all monitors. This is not a trivial task and should not be repeated too frequently or it may affect the performance of the rest of the system.', Category = 'lowband', Readonly = '0', Requires = '';
|
insert into Config set Id = 155, Name = 'ZM_WEB_M_AJAX_TIMEOUT', Value = '5000', Type = 'integer', DefaultValue = '5000', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How long to wait for Ajax request responses (ms)', Help = 'The newer versions of the live feed and event views use Ajax to request information from the server and populate the views dynamically. This option allows you to specify a timeout if required after which requests are abandoned. A timeout may be necessary if requests would overwise hang such as on a slow connection. This would tend to consume a lot of browser memory and make the interface unresponsive. Ordinarily no requests should timeout so this setting should be set to a value greater than the slowest expected response. This value is in milliseconds but if set to zero then no timeout will be used.', Category = 'medband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 156, Name = 'ZM_WEB_L_REFRESH_CYCLE', Value = '30', Type = 'integer', DefaultValue = '30', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How often (in seconds) the cycle watch window swaps to the next monitor', Help = 'The cycle watch window is a method of continuously cycling between images from all of your monitors. This option determines how often to refresh with a new image.', Category = 'lowband', Readonly = '0', Requires = '';
|
insert into Config set Id = 156, Name = 'ZM_WEB_L_REFRESH_MAIN', Value = '300', Type = 'integer', DefaultValue = '300', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How often (in seconds) the main console window should refresh itself', Help = 'The main console window lists a general status and the event totals for all monitors. This is not a trivial task and should not be repeated too frequently or it may affect the performance of the rest of the system.', Category = 'lowband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 157, Name = 'ZM_WEB_L_REFRESH_IMAGE', Value = '15', Type = 'integer', DefaultValue = '15', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How often (in seconds) the watched image is refreshed (if not streaming)', Help = 'The live images from a monitor can be viewed in either streamed or stills mode. This option determines how often a stills image is refreshed, it has no effect if streaming is selected.', Category = 'lowband', Readonly = '0', Requires = '';
|
insert into Config set Id = 157, Name = 'ZM_WEB_L_REFRESH_CYCLE', Value = '30', Type = 'integer', DefaultValue = '30', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How often (in seconds) the cycle watch window swaps to the next monitor', Help = 'The cycle watch window is a method of continuously cycling between images from all of your monitors. This option determines how often to refresh with a new image.', Category = 'lowband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 158, Name = 'ZM_WEB_L_REFRESH_STATUS', Value = '10', Type = 'integer', DefaultValue = '10', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How often (in seconds) the status refreshes itself in the watch window', Help = 'The monitor window is actually made from several frames. The one in the middle merely contains a monitor status which needs to refresh fairly frequently to give a true indication. This option determines that frequency.', Category = 'lowband', Readonly = '0', Requires = '';
|
insert into Config set Id = 158, Name = 'ZM_WEB_L_REFRESH_IMAGE', Value = '15', Type = 'integer', DefaultValue = '15', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How often (in seconds) the watched image is refreshed (if not streaming)', Help = 'The live images from a monitor can be viewed in either streamed or stills mode. This option determines how often a stills image is refreshed, it has no effect if streaming is selected.', Category = 'lowband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 159, Name = 'ZM_WEB_L_REFRESH_EVENTS', Value = '180', Type = 'integer', DefaultValue = '180', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How often (in seconds) the event listing is refreshed in the watch window', Help = 'The monitor window is actually made from several frames. The lower framme contains a listing of the last few events for easy access. This option determines how often this is refreshed.', Category = 'lowband', Readonly = '0', Requires = '';
|
insert into Config set Id = 159, Name = 'ZM_WEB_L_REFRESH_STATUS', Value = '10', Type = 'integer', DefaultValue = '10', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How often (in seconds) the status refreshes itself in the watch window', Help = 'The monitor window is actually made from several frames. The one in the middle merely contains a monitor status which needs to refresh fairly frequently to give a true indication. This option determines that frequency.', Category = 'lowband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 160, Name = 'ZM_WEB_L_DEFAULT_SCALE', Value = '100', Type = 'integer', DefaultValue = '100', Hint = '25|33|50|75|100|150|200|300|400', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'What the default scaling factor applied to \'live\' or \'event\' views is (%)', Help = 'Normally ZoneMinder will display \'live\' or \'event\' streams in their native size. However if you have monitors with large dimensions or a slow link you may prefer to reduce this size, alternatively for small monitors you can enlarge it. This options lets you specify what the default scaling factor will be. It is expressed as a percentage so 100 is normal size, 200 is double size etc.', Category = 'lowband', Readonly = '0', Requires = '';
|
insert into Config set Id = 160, Name = 'ZM_WEB_L_REFRESH_EVENTS', Value = '180', Type = 'integer', DefaultValue = '180', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How often (in seconds) the event listing is refreshed in the watch window', Help = 'The monitor window is actually made from several frames. The lower framme contains a listing of the last few events for easy access. This option determines how often this is refreshed.', Category = 'lowband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 161, Name = 'ZM_WEB_L_DEFAULT_RATE', Value = '100', Type = 'integer', DefaultValue = '100', Hint = '25|50|100|150|200|400|1000|2500|5000|10000', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'What the default replay rate factor applied to \'event\' views is (%)', Help = 'Normally ZoneMinder will display \'event\' streams at their native rate, i.e. as close to real-time as possible. However if you have long events it is often convenient to replay them at a faster rate for review. This option lets you specify what the default replay rate will be. It is expressed as a percentage so 100 is normal rate, 200 is double speed etc.', Category = 'lowband', Readonly = '0', Requires = '';
|
insert into Config set Id = 161, Name = 'ZM_WEB_L_DEFAULT_SCALE', Value = '100', Type = 'integer', DefaultValue = '100', Hint = '25|33|50|75|100|150|200|300|400', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'What the default scaling factor applied to \'live\' or \'event\' views is (%)', Help = 'Normally ZoneMinder will display \'live\' or \'event\' streams in their native size. However if you have monitors with large dimensions or a slow link you may prefer to reduce this size, alternatively for small monitors you can enlarge it. This options lets you specify what the default scaling factor will be. It is expressed as a percentage so 100 is normal size, 200 is double size etc.', Category = 'lowband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 162, Name = 'ZM_WEB_L_VIDEO_BITRATE', Value = '25000', Type = 'integer', DefaultValue = '25000', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'What the bitrate of the video encoded stream should be set to', Help = 'When encoding real video via the ffmpeg library a bit rate can be specified which roughly corresponds to the available bandwidth used for the stream. This setting effectively corresponds to a \'quality\' setting for the video. A low value will result in a blocky image whereas a high value will produce a clearer view. Note that this setting does not control the frame rate of the video however the quality of the video produced is affected both by this setting and the frame rate that the video is produced at. A higher frame rate at a particular bit rate result in individual frames being at a lower quality.', Category = 'lowband', Readonly = '0', Requires = '';
|
insert into Config set Id = 162, Name = 'ZM_WEB_L_DEFAULT_RATE', Value = '100', Type = 'integer', DefaultValue = '100', Hint = '25|50|100|150|200|400|1000|2500|5000|10000', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'What the default replay rate factor applied to \'event\' views is (%)', Help = 'Normally ZoneMinder will display \'event\' streams at their native rate, i.e. as close to real-time as possible. However if you have long events it is often convenient to replay them at a faster rate for review. This option lets you specify what the default replay rate will be. It is expressed as a percentage so 100 is normal rate, 200 is double speed etc.', Category = 'lowband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 163, Name = 'ZM_WEB_L_VIDEO_MAXFPS', Value = '5', Type = 'integer', DefaultValue = '5', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'What the maximum frame rate for streamed video should be', Help = 'When using streamed video the main control is the bitrate which determines how much data can be transmitted. However a lower bitrate at high frame rates results in a lower quality image. This option allows you to limit the maximum frame rate to ensure that video quality is maintained. An additional advantage is that encoding video at high frame rates is a processor intensive task when for the most part a very high frame rate offers little perceptible improvement over one that has a more manageable resource requirement. Note, this option is implemented as a cap beyond which binary reduction takes place. So if you have a device capturing at 15fps and set this option to 10fps then the video is not produced at 10fps, but rather at 7.5fps (15 divided by 2) as the final frame rate must be the original divided by a power of 2.', Category = 'lowband', Readonly = '0', Requires = '';
|
insert into Config set Id = 163, Name = 'ZM_WEB_L_VIDEO_BITRATE', Value = '25000', Type = 'integer', DefaultValue = '25000', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'What the bitrate of the video encoded stream should be set to', Help = 'When encoding real video via the ffmpeg library a bit rate can be specified which roughly corresponds to the available bandwidth used for the stream. This setting effectively corresponds to a \'quality\' setting for the video. A low value will result in a blocky image whereas a high value will produce a clearer view. Note that this setting does not control the frame rate of the video however the quality of the video produced is affected both by this setting and the frame rate that the video is produced at. A higher frame rate at a particular bit rate result in individual frames being at a lower quality.', Category = 'lowband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 164, Name = 'ZM_WEB_L_SCALE_THUMBS', Value = '1', Type = 'boolean', DefaultValue = 'yes', Hint = 'yes|no', Pattern = '(?i-xsm:^([yn]))', Format = ' ($1 =~ /^y/) ? \"yes\" : \"no\" ', Prompt = 'Whether to scale thumbnails in events, bandwidth versus cpu in rescaling', Help = 'If unset, this option sends the whole image to the browser which resizes it in the window. If set the image is scaled down on the server before sending a reduced size image to the browser to conserve bandwidth at the cost of cpu on the server', Category = 'lowband', Readonly = '0', Requires = 'ZM_PATH_NETPBM=/';
|
insert into Config set Id = 164, Name = 'ZM_WEB_L_VIDEO_MAXFPS', Value = '5', Type = 'integer', DefaultValue = '5', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'What the maximum frame rate for streamed video should be', Help = 'When using streamed video the main control is the bitrate which determines how much data can be transmitted. However a lower bitrate at high frame rates results in a lower quality image. This option allows you to limit the maximum frame rate to ensure that video quality is maintained. An additional advantage is that encoding video at high frame rates is a processor intensive task when for the most part a very high frame rate offers little perceptible improvement over one that has a more manageable resource requirement. Note, this option is implemented as a cap beyond which binary reduction takes place. So if you have a device capturing at 15fps and set this option to 10fps then the video is not produced at 10fps, but rather at 7.5fps (15 divided by 2) as the final frame rate must be the original divided by a power of 2.', Category = 'lowband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 165, Name = 'ZM_WEB_L_USE_STREAMS', Value = '1', Type = 'boolean', DefaultValue = 'yes', Hint = 'yes|no', Pattern = '(?i-xsm:^([yn]))', Format = ' ($1 =~ /^y/) ? \"yes\" : \"no\" ', Prompt = 'Whether to use streaming or stills for live and events views', Help = 'Both the live and events views can use streaming to deliver a smoother feed. However over slow connections or in some other circumstances you can prefer to view stills instead. You can configure this globally with ZM_CAN_STREAM but this option allows you to modify your preference based on the bandwidth setting. Note that this option does not prevent you switching to streaming mode but just selects what the initial default setting is.', Category = 'lowband', Readonly = '0', Requires = '';
|
insert into Config set Id = 165, Name = 'ZM_WEB_L_SCALE_THUMBS', Value = '1', Type = 'boolean', DefaultValue = 'yes', Hint = 'yes|no', Pattern = '(?i-xsm:^([yn]))', Format = ' ($1 =~ /^y/) ? \"yes\" : \"no\" ', Prompt = 'Whether to scale thumbnails in events, bandwidth versus cpu in rescaling', Help = 'If unset, this option sends the whole image to the browser which resizes it in the window. If set the image is scaled down on the server before sending a reduced size image to the browser to conserve bandwidth at the cost of cpu on the server', Category = 'lowband', Readonly = '0', Requires = 'ZM_PATH_NETPBM=/';
|
||||||
insert into Config set Id = 166, Name = 'ZM_WEB_L_EVENTS_VIEW', Value = 'events', Type = 'string', DefaultValue = 'events', Hint = 'events|timeline', Pattern = '(?i-xsm:^([lt]))', Format = ' $1 =~ /^e/ ? \"events\" : \"timeline\" ', Prompt = 'What the default view of multiple events should be.', Help = 'Stored events can be viewed in either an events list format or in a timeline based one. This option sets the default view that will be used. Choosing one view here does not prevent the other view being used as it will always be selectable from whichever view is currently being used.', Category = 'lowband', Readonly = '0', Requires = '';
|
insert into Config set Id = 166, Name = 'ZM_WEB_L_USE_STREAMS', Value = '1', Type = 'boolean', DefaultValue = 'yes', Hint = 'yes|no', Pattern = '(?i-xsm:^([yn]))', Format = ' ($1 =~ /^y/) ? \"yes\" : \"no\" ', Prompt = 'Whether to use streaming or stills for live and events views', Help = 'Both the live and events views can use streaming to deliver a smoother feed. However over slow connections or in some other circumstances you can prefer to view stills instead. You can configure this globally with ZM_CAN_STREAM but this option allows you to modify your preference based on the bandwidth setting. Note that this option does not prevent you switching to streaming mode but just selects what the initial default setting is.', Category = 'lowband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 167, Name = 'ZM_WEB_L_SHOW_PROGRESS', Value = '0', Type = 'boolean', DefaultValue = 'no', Hint = 'yes|no', Pattern = '(?i-xsm:^([yn]))', Format = ' ($1 =~ /^y/) ? \"yes\" : \"no\" ', Prompt = 'Whether to show the progress of replay in event view.', Help = 'When viewing events an event navigation panel and progress bar is shown below the event itself. This allows you to jump to specific points in the event, but can can also dynamically update to display the current progress of the event replay itself. This progress is calculated from the actual event duration and is not directly linked to the replay itself, so on limited bandwidth connections may be out of step with the replay. This option allows you to turn off the progress display, whilst still keeping the navigation aspect, where bandwidth prevents it functioning effectively.', Category = 'lowband', Readonly = '0', Requires = '';
|
insert into Config set Id = 167, Name = 'ZM_WEB_L_EVENTS_VIEW', Value = 'events', Type = 'string', DefaultValue = 'events', Hint = 'events|timeline', Pattern = '(?i-xsm:^([lt]))', Format = ' $1 =~ /^e/ ? \"events\" : \"timeline\" ', Prompt = 'What the default view of multiple events should be.', Help = 'Stored events can be viewed in either an events list format or in a timeline based one. This option sets the default view that will be used. Choosing one view here does not prevent the other view being used as it will always be selectable from whichever view is currently being used.', Category = 'lowband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 168, Name = 'ZM_WEB_L_AJAX_TIMEOUT', Value = '10000', Type = 'integer', DefaultValue = '10000', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How long to wait for Ajax request responses (ms)', Help = 'The newer versions of the live feed and event views use Ajax to request information from the server and populate the views dynamically. This option allows you to specify a timeout if required after which requests are abandoned. A timeout may be necessary if requests would overwise hang such as on a slow connection. This would tend to consume a lot of browser memory and make the interface unresponsive. Ordinarily no requests should timeout so this setting should be set to a value greater than the slowest expected response. This value is in milliseconds but if set to zero then no timeout will be used.', Category = 'lowband', Readonly = '0', Requires = '';
|
insert into Config set Id = 168, Name = 'ZM_WEB_L_SHOW_PROGRESS', Value = '0', Type = 'boolean', DefaultValue = 'no', Hint = 'yes|no', Pattern = '(?i-xsm:^([yn]))', Format = ' ($1 =~ /^y/) ? \"yes\" : \"no\" ', Prompt = 'Whether to show the progress of replay in event view.', Help = 'When viewing events an event navigation panel and progress bar is shown below the event itself. This allows you to jump to specific points in the event, but can can also dynamically update to display the current progress of the event replay itself. This progress is calculated from the actual event duration and is not directly linked to the replay itself, so on limited bandwidth connections may be out of step with the replay. This option allows you to turn off the progress display, whilst still keeping the navigation aspect, where bandwidth prevents it functioning effectively.', Category = 'lowband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 169, Name = 'ZM_WEB_P_DEFAULT_RATE', Value = '100', Type = 'integer', DefaultValue = '100', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'What the default replay rate factor applied to \'event\' views is (%)', Help = 'Normally ZoneMinder will display \'event\' streams at their native rate, i.e. as close to real-time as possible. However if you have long events it is often convenient to replay them at a faster rate for review. This option lets you specify what the default replay rate will be. It is expressed as a percentage so 100 is normal rate, 200 is double speed etc.', Category = 'phoneband', Readonly = '0', Requires = '';
|
insert into Config set Id = 169, Name = 'ZM_WEB_L_AJAX_TIMEOUT', Value = '10000', Type = 'integer', DefaultValue = '10000', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How long to wait for Ajax request responses (ms)', Help = 'The newer versions of the live feed and event views use Ajax to request information from the server and populate the views dynamically. This option allows you to specify a timeout if required after which requests are abandoned. A timeout may be necessary if requests would overwise hang such as on a slow connection. This would tend to consume a lot of browser memory and make the interface unresponsive. Ordinarily no requests should timeout so this setting should be set to a value greater than the slowest expected response. This value is in milliseconds but if set to zero then no timeout will be used.', Category = 'lowband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 170, Name = 'ZM_WEB_P_SCALE_THUMBS', Value = '1', Type = 'boolean', DefaultValue = 'yes', Hint = 'yes|no', Pattern = '(?i-xsm:^([yn]))', Format = ' ($1 =~ /^y/) ? \"yes\" : \"no\" ', Prompt = 'Whether to scale thumbnails in events, bandwidth versus cpu in rescaling', Help = 'If unset, this option sends the whole image to the browser which resizes it in the window. If set the image is scaled down on the server before sending a reduced size image to the browser to conserve bandwidth at the cost of cpu on the server', Category = 'phoneband', Readonly = '0', Requires = 'ZM_PATH_NETPBM=/';
|
insert into Config set Id = 170, Name = 'ZM_WEB_P_DEFAULT_RATE', Value = '100', Type = 'integer', DefaultValue = '100', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'What the default replay rate factor applied to \'event\' views is (%)', Help = 'Normally ZoneMinder will display \'event\' streams at their native rate, i.e. as close to real-time as possible. However if you have long events it is often convenient to replay them at a faster rate for review. This option lets you specify what the default replay rate will be. It is expressed as a percentage so 100 is normal rate, 200 is double speed etc.', Category = 'phoneband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 171, Name = 'ZM_WEB_P_AJAX_TIMEOUT', Value = '10000', Type = 'integer', DefaultValue = '10000', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How long to wait for Ajax request responses (ms)', Help = 'The newer versions of the live feed and event views use Ajax to request information from the server and populate the views dynamically. This option allows you to specify a timeout if required after which requests are abandoned. A timeout may be necessary if requests would overwise hang such as on a slow connection. This would tend to consume a lot of browser memory and make the interface unresponsive. Ordinarily no requests should timeout so this setting should be set to a value greater than the slowest expected response. This value is in milliseconds but if set to zero then no timeout will be used.', Category = 'phoneband', Readonly = '0', Requires = '';
|
insert into Config set Id = 171, Name = 'ZM_WEB_P_SCALE_THUMBS', Value = '1', Type = 'boolean', DefaultValue = 'yes', Hint = 'yes|no', Pattern = '(?i-xsm:^([yn]))', Format = ' ($1 =~ /^y/) ? \"yes\" : \"no\" ', Prompt = 'Whether to scale thumbnails in events, bandwidth versus cpu in rescaling', Help = 'If unset, this option sends the whole image to the browser which resizes it in the window. If set the image is scaled down on the server before sending a reduced size image to the browser to conserve bandwidth at the cost of cpu on the server', Category = 'phoneband', Readonly = '0', Requires = 'ZM_PATH_NETPBM=/';
|
||||||
insert into Config set Id = 172, Name = 'ZM_DYN_LAST_VERSION', Value = '', Type = 'string', DefaultValue = '', Hint = 'string', Pattern = '(?-xism:^(.+)$)', Format = ' $1 ', Prompt = 'What the last version of ZoneMinder recorded from zoneminder.com is', Help = '', Category = 'dynamic', Readonly = '1', Requires = '';
|
insert into Config set Id = 172, Name = 'ZM_WEB_P_AJAX_TIMEOUT', Value = '10000', Type = 'integer', DefaultValue = '10000', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'How long to wait for Ajax request responses (ms)', Help = 'The newer versions of the live feed and event views use Ajax to request information from the server and populate the views dynamically. This option allows you to specify a timeout if required after which requests are abandoned. A timeout may be necessary if requests would overwise hang such as on a slow connection. This would tend to consume a lot of browser memory and make the interface unresponsive. Ordinarily no requests should timeout so this setting should be set to a value greater than the slowest expected response. This value is in milliseconds but if set to zero then no timeout will be used.', Category = 'phoneband', Readonly = '0', Requires = '';
|
||||||
insert into Config set Id = 173, Name = 'ZM_DYN_CURR_VERSION', Value = '@VERSION@', Type = 'string', DefaultValue = '1.24.0', Hint = 'string', Pattern = '(?-xism:^(.+)$)', Format = ' $1 ', Prompt = 'What the effective current version of ZoneMinder is, might be different from actual if versions ignored', Help = '', Category = 'dynamic', Readonly = '1', Requires = '';
|
insert into Config set Id = 173, Name = 'ZM_DYN_LAST_VERSION', Value = '', Type = 'string', DefaultValue = '', Hint = 'string', Pattern = '(?-xism:^(.+)$)', Format = ' $1 ', Prompt = 'What the last version of ZoneMinder recorded from zoneminder.com is', Help = '', Category = 'dynamic', Readonly = '1', Requires = '';
|
||||||
insert into Config set Id = 174, Name = 'ZM_DYN_DB_VERSION', Value = '@VERSION@', Type = 'string', DefaultValue = '1.24.0', Hint = 'string', Pattern = '(?-xism:^(.+)$)', Format = ' $1 ', Prompt = 'What the version of the database is, from zmupdate', Help = '', Category = 'dynamic', Readonly = '1', Requires = '';
|
insert into Config set Id = 174, Name = 'ZM_DYN_CURR_VERSION', Value = '@VERSION@', Type = 'string', DefaultValue = '1.24.0', Hint = 'string', Pattern = '(?-xism:^(.+)$)', Format = ' $1 ', Prompt = 'What the effective current version of ZoneMinder is, might be different from actual if versions ignored', Help = '', Category = 'dynamic', Readonly = '1', Requires = '';
|
||||||
insert into Config set Id = 175, Name = 'ZM_DYN_LAST_CHECK', Value = '', Type = 'integer', DefaultValue = '', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'When the last check for version from zoneminder.com was', Help = '', Category = 'dynamic', Readonly = '1', Requires = '';
|
insert into Config set Id = 175, Name = 'ZM_DYN_DB_VERSION', Value = '@VERSION@', Type = 'string', DefaultValue = '1.24.0', Hint = 'string', Pattern = '(?-xism:^(.+)$)', Format = ' $1 ', Prompt = 'What the version of the database is, from zmupdate', Help = '', Category = 'dynamic', Readonly = '1', Requires = '';
|
||||||
insert into Config set Id = 176, Name = 'ZM_DYN_NEXT_REMINDER', Value = '', Type = 'string', DefaultValue = '', Hint = 'string', Pattern = '(?-xism:^(.+)$)', Format = ' $1 ', Prompt = 'When the earliest time to remind about versions will be', Help = '', Category = 'dynamic', Readonly = '1', Requires = '';
|
insert into Config set Id = 176, Name = 'ZM_DYN_LAST_CHECK', Value = '', Type = 'integer', DefaultValue = '', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'When the last check for version from zoneminder.com was', Help = '', Category = 'dynamic', Readonly = '1', Requires = '';
|
||||||
insert into Config set Id = 177, Name = 'ZM_DYN_DONATE_REMINDER_TIME', Value = '0', Type = 'integer', DefaultValue = '0', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'When the earliest time to remind about donations will be', Help = '', Category = 'dynamic', Readonly = '1', Requires = '';
|
insert into Config set Id = 177, Name = 'ZM_DYN_NEXT_REMINDER', Value = '', Type = 'string', DefaultValue = '', Hint = 'string', Pattern = '(?-xism:^(.+)$)', Format = ' $1 ', Prompt = 'When the earliest time to remind about versions will be', Help = '', Category = 'dynamic', Readonly = '1', Requires = '';
|
||||||
insert into Config set Id = 178, Name = 'ZM_DYN_SHOW_DONATE_REMINDER', Value = '1', Type = 'boolean', DefaultValue = 'yes', Hint = 'yes|no', Pattern = '(?i-xsm:^([yn]))', Format = ' ($1 =~ /^y/) ? \"yes\" : \"no\" ', Prompt = 'Whether to remind about donations or not', Help = '', Category = 'dynamic', Readonly = '1', Requires = '';
|
insert into Config set Id = 178, Name = 'ZM_DYN_DONATE_REMINDER_TIME', Value = '0', Type = 'integer', DefaultValue = '0', Hint = 'integer', Pattern = '(?-xism:^(\d+)$)', Format = ' $1 ', Prompt = 'When the earliest time to remind about donations will be', Help = '', Category = 'dynamic', Readonly = '1', Requires = '';
|
||||||
|
insert into Config set Id = 179, Name = 'ZM_DYN_SHOW_DONATE_REMINDER', Value = '1', Type = 'boolean', DefaultValue = 'yes', Hint = 'yes|no', Pattern = '(?i-xsm:^([yn]))', Format = ' ($1 =~ /^y/) ? \"yes\" : \"no\" ', Prompt = 'Whether to remind about donations or not', Help = '', Category = 'dynamic', Readonly = '1', Requires = '';
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -1132,6 +1132,14 @@ body = "ZM alarm detected - %EL% secs, %EF%/%EFA% frames, t%EST%/m%ESM%/a%ESA% s
|
||||||
type => $types{hexadecimal},
|
type => $types{hexadecimal},
|
||||||
category => "system",
|
category => "system",
|
||||||
},
|
},
|
||||||
|
{
|
||||||
|
name => "ZM_DUMP_CORES",
|
||||||
|
default => "no",
|
||||||
|
description => "Whether to create core files on unexpected process failure.",
|
||||||
|
help => "When an unrecoverable error occurs in a ZoneMinder binary process is has traditionally been trapped and the details written to logs to aid in remote analysis. However in some cases it is easier to diagnose the error if a core file, which is a memory dump of the process at the time of the error, is created. This can be interactively analysed in the debugger and may reveal more or better information than that available from the logs. This option is recommended for advanced users only otherwise leave at the default. Note using this option to trigger core files will mean that there will be no indication in the binary logs that a process has died, they will just stop, however the zmdc log will still contain an entry. Also note that you may have to explicitly enable core file creation on your system via the 'ulimit -c' command or other means otherwise no file will be created regardless of the value of this option.",
|
||||||
|
type => $types{boolean},
|
||||||
|
category => "system",
|
||||||
|
},
|
||||||
{
|
{
|
||||||
name => "ZM_WEB_REFRESH_METHOD",
|
name => "ZM_WEB_REFRESH_METHOD",
|
||||||
default => "javascript",
|
default => "javascript",
|
||||||
|
|
|
||||||
|
|
@ -157,6 +157,13 @@ void zmSetDefaultTermHandler()
|
||||||
|
|
||||||
void zmSetDefaultDieHandler()
|
void zmSetDefaultDieHandler()
|
||||||
{
|
{
|
||||||
zmSetDieHandler( (SigHandler *)zm_die_handler );
|
if ( config.dump_cores )
|
||||||
|
{
|
||||||
|
// Do nothing
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
zmSetDieHandler( (SigHandler *)zm_die_handler );
|
||||||
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue