fix spelling

This commit is contained in:
Patrick 2020-01-28 20:22:18 -07:00 committed by GitHub
parent 6345ecc479
commit c5b419976f
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 1 additions and 1 deletions

View File

@ -109,7 +109,7 @@ This brings up the new monitor window:
* In this example, the Function is 'Modect', which means it will start recording if motion is detected on that camera feed. The parameters for what constitutes motion detected is specific in :doc:`definezone` * In this example, the Function is 'Modect', which means it will start recording if motion is detected on that camera feed. The parameters for what constitutes motion detected is specific in :doc:`definezone`
* In Analytis FPS, we've put in 5FPS here. Note that you should not put an FPS that is greater than the camera FPS. In my case, 5FPS is sufficient for my needs * In Analysis FPS, we've put in 5FPS here. Note that you should not put an FPS that is greater than the camera FPS. In my case, 5FPS is sufficient for my needs
.. note:: .. note::
Leave Maximum FPS and Alarm Maximum FPS **empty** if you are configuring an IP camera. In older versions of ZoneMinder, you were encouraged to put a value here, but that is no longer recommended. Infact, if you see your feed going much slower than the feed is supposed to go, or you get a lot of buffering/display issues, make sure this is empty. If you need to control camera FPS, please do it directly on the camera (via its own web interface, for example) Leave Maximum FPS and Alarm Maximum FPS **empty** if you are configuring an IP camera. In older versions of ZoneMinder, you were encouraged to put a value here, but that is no longer recommended. Infact, if you see your feed going much slower than the feed is supposed to go, or you get a lot of buffering/display issues, make sure this is empty. If you need to control camera FPS, please do it directly on the camera (via its own web interface, for example)