5ace2ca082
Fix loading Importance in sql. Change zones to a std::list<Zone>
2021-04-17 12:50:26 -04:00
ab356a3695
Add a warning when connecting without disconnecting which can cause memleaks
2021-04-12 15:59:31 -04:00
939a0f40e6
Include image_count in debug line
2021-04-11 13:22:37 -04:00
ed29021179
Rough in an importance setting in monitor that we can use to decrease the log level of certain events like PrimeCapture for cameras that we don't care about
2021-04-11 12:59:18 -04:00
1ccc416224
Merge branch 'release-1.34'
2021-04-09 20:00:47 -04:00
d9dc61265d
Fix DisableAlarms. Use signal when capture fails instead of erroneously using TRIGGER_OFF. Add status to DumpSettings so that we can query it with zmu.
2021-04-09 17:46:11 -04:00
4bd490d121
Set signal=true if capture succeeds.
2021-04-08 11:37:27 -04:00
2d7479cb59
reintroduce Start() methods to analysis and decoding thread
2021-04-07 20:36:38 -04:00
a63186444b
Replace char arrays with std::strings in monitor class.
2021-04-07 14:15:55 -04:00
817da4e621
Monitor: Make decoder a unique_ptr
...
The DecoderThread object is owned by the Monitor. Signal this by using unique_ptr.
2021-04-06 12:50:05 +02:00
fee5ecd72f
Monitor: Make analysis_thread a unique_ptr
...
The AnalysisThread object is owned by the Monitor. Signal this by using unique_ptr.
2021-04-06 12:50:05 +02:00
4c988860d5
Close events in a background thread. Add a ton more debugging
2021-04-05 12:56:13 -04:00
405be70430
Use packetqueue unlock to also notify
2021-04-02 21:26:01 -04:00
87fc35dbe6
Add LOW_PRIORITY to fps status updates
2021-04-02 13:09:32 -04:00
bcd0e84a31
do sws_scale from decoded image to Image using a member context and avframe to save a few cycles
2021-04-01 13:22:57 -04:00
0e00cb0289
use the new packetqueue::unlock to unlock packets and wake up decoding thread
2021-04-01 11:52:47 -04:00
fd23b3e284
Adjust debug levels
2021-03-31 16:49:19 -04:00
c73393579d
Handle event creation failing gracefullyish
2021-03-31 12:06:33 -04:00
8c6f03a4e4
Move waiting for decoding down into motion detection section. Add a test for successful decode. Decode may not provide an image.
2021-03-30 09:16:45 -04:00
3202db1b33
Move waiting for decoding down into motion detection part, which is what needs it. Not sure why it was up so high. This should allow more ram freeing for people with analysis fps set to something.
2021-03-30 09:16:44 -04:00
0bfbdd6121
Use our new CODEC define to cleanup the code
2021-03-30 09:15:28 -04:00
9463cf8565
I can't imagine what fps_report_interval has to do with event being longer than section_length. Use analysis_image_count in log
2021-03-29 09:57:57 -04:00
52cb182ae3
Load max_image_buffer_count in monitor and set it in packetqueue. rename max_video_packet_count to pre_event_video_count in packetqueue and adjust logic. When queuing packets check to ensure that we aren't going over. Delete packets from front if possible, do not queue packet if not possible
2021-03-26 14:26:37 -04:00
b8b20917be
setKeepKeyframes when not PASSTHROUGH
2021-03-22 12:05:22 -04:00
4e8c7d1f7c
Eliminate non-thread-safe calls to localtime
...
localtime uses an internal static storage to which a pointer is given as return value.
Due to this it is not safe to call localtime from multiple threads since the same static storage is used.
Use localtime_r instead which allows to pass in a tm struct.
Fixes:
https://github.com/ZoneMinder/zoneminder/security/code-scanning/24
https://github.com/ZoneMinder/zoneminder/security/code-scanning/25
https://github.com/ZoneMinder/zoneminder/security/code-scanning/26
https://github.com/ZoneMinder/zoneminder/security/code-scanning/27
https://github.com/ZoneMinder/zoneminder/security/code-scanning/28
https://github.com/ZoneMinder/zoneminder/security/code-scanning/30
https://github.com/ZoneMinder/zoneminder/security/code-scanning/31
https://github.com/ZoneMinder/zoneminder/security/code-scanning/33
https://github.com/ZoneMinder/zoneminder/security/code-scanning/58
https://github.com/ZoneMinder/zoneminder/security/code-scanning/59
https://github.com/ZoneMinder/zoneminder/security/code-scanning/63
https://github.com/ZoneMinder/zoneminder/security/code-scanning/64
https://github.com/ZoneMinder/zoneminder/security/code-scanning/65
2021-03-21 21:42:02 +01:00
7c9eb42ebb
Merge branch 'master' into 3197-record-event-close-mode
2021-03-21 13:03:26 -04:00
a042e4bf77
spacing
2021-03-20 19:27:18 -04:00
db7e9edcab
Issue #3197 Improvement
2021-03-21 00:00:36 +01:00
33f98a0d40
Issue #3197 Add RECORD to Event_Close_Mode time
2021-03-20 20:02:52 +01:00
edefbfcad6
Remove assumptions about Analysis being about motion detection. Fixes mem leaks in Monitor mode
2021-03-18 09:24:27 -04:00
f4506a8f35
We always need an analysis thread.
2021-03-17 23:41:00 -04:00
ccb1bc1a7d
Have to wait until we are finished with the packet before unlocking.
2021-03-17 16:11:31 -04:00
fb28c6b365
Fix login in Decode for non-ffmpeg monitors
2021-03-17 15:53:14 -04:00
284fe52b5f
fix double stop/free of decoder and analysis threads
2021-03-17 12:57:45 -04:00
dca34544ec
move analysis thread into monitor. populate analysis_it and decoder_it in Prime instead of constantly checking for them. Handle cases where LockedPacket are null due to shutdown
2021-03-17 12:47:52 -04:00
657a5edda4
If decoding disabled, set signal and last_write_time in the Capture thread. So that zm_watch knows we are alive
2021-03-17 10:11:06 -04:00
74616d1061
Update CaptureFPS SQL to just do an update and don't use static sql. TThis may fix a signal 6 crash that we have been seeing
2021-03-17 10:06:45 -04:00
12ed02a5b0
Move trigger detection before motion detection. Only wait for decoding if decoding is enabled
2021-03-16 20:07:59 -04:00
5e54a63bd5
Only load zones if doing something other than QUERY. Only delete decoder if there is one.
2021-03-16 13:26:40 -04:00
76267bc57f
put back deleting the raw image when not saving jpegs. We only need it for the snapshot and that should be the alarmed image anyways.
2021-03-16 12:08:11 -04:00
9903e909af
Rework locking in ZMPacket by using a new class called ZMLockedPacket.
2021-03-15 17:05:30 -04:00
b238a2bc25
Implement decoder thread, locking is broken
2021-03-15 15:08:43 -04:00
644d6d34a4
Must init video_stream_id and audio_stream_id
2021-03-10 17:23:44 -05:00
41085c9e5c
Remove final bits of zm_video writer.
2021-03-08 22:14:13 -05:00
e38e8a2775
Actually use zmc_heartbeat_time. Set it on every capture and use it in ShmValid to determine if zmc has gone away.
2021-03-08 09:30:53 -05:00
9e77324de4
Replace raw mysql_query calls with the zmDb* functions
...
With this we can make sure we have proper locking of our DB connection at all times.
2021-03-06 00:12:18 +01:00
fa22129966
Make last_alarm_count last alarmed frame while only in ALARM state to make post_event_count counts since here not alone alarmed frames that don't shot alarms.
2021-03-04 20:20:02 +01:00
e67626b4e2
logger: Move log_mutex to std::recursive_mutex
2021-03-03 23:31:53 +01:00
20fe6153d5
Don't treat data packets as video
2021-03-03 15:52:39 -05:00
b87d859f72
Set the packet's stream_index to the packetqueue stream. Rename get_ functions to get
2021-03-03 12:06:34 -05:00
a01a24ec36
Add loading SecondPath in monitor
2021-03-03 09:56:33 -05:00
46ec4e75d4
Check codec type instead of stream_index to determine video/audio
2021-03-03 09:52:27 -05:00
4ff016c991
Make capturing/analysing log lines follow same pattern
2021-03-02 20:51:16 +01:00
be1b439dcc
Add State_Strings and code cleanup. Fix not going into alarm state when already recording. Fixes #3184
2021-03-02 14:42:54 -05:00
f35a1c70c0
fix build with old avcodec for xenial
2021-03-02 12:07:51 -05:00
c03d9b2987
Set state before we write packets to event so that the event knows that it is alarmed
2021-03-02 11:47:55 -05:00
71d65685b9
Can't clear image data early. Might be needed for snapshot and pre alarm farmes
2021-03-02 11:12:57 -05:00
46743ebaab
Silence compile warning
2021-03-02 10:00:48 -05:00
832eabbd79
Don't both updating analysis fps unless we are doing motion detection
2021-03-02 09:59:32 -05:00
1bc5abb9e9
Only include video packets in analysis_image_count
2021-03-01 17:07:09 -05:00
51c19912f8
Use analysis_image_count in opening new event log line
2021-03-01 16:56:47 -05:00
9302c9506e
Add audio_frequency and audio_channels to shared mem and set them in PrimeCapture
2021-03-01 16:49:27 -05:00
6e73c08a21
add fifo's for video and audio. Write the packet data to them. Update FifoStream->Fifo
2021-03-01 16:49:26 -05:00
6c6d6c51b0
Add RTSPSTreamName loading and write packet data to the video and audio fifos
2021-03-01 16:46:48 -05:00
33dbcc449a
Merge pull request #3181 from Carbenium/rgb-const
...
rgb: Convert some constant defines to constexpr
2021-03-01 09:40:39 -05:00
71d864d77b
Merge pull request #3182 from Carbenium/monitor-includes
...
monitor: Move system includes back to their original location
2021-03-01 09:40:08 -05:00
3b3ecb89b2
monitor: Move system includes back to their original location
...
41dc0212e0cf9406a1e8
2021-03-01 00:45:57 +01:00
76e6c468e8
rgb: Convert some constant defines to constexpr
...
Using defines interferes with fmt.
Also rename them according to the Google styleguide.
2021-03-01 00:38:21 +01:00
741e67e8cd
ALERT also mean warming up with alarm_frame_count value before returning to ALARM....
2021-02-28 22:42:29 +01:00
6a47780f60
Fix a warning reported by -Wextra
...
/home/peterke/DEV/zoneminder/src/zm_monitor.h: In member function ‘Monitor::TriggerState Monitor::GetTriggerState() const’:
/home/peterke/DEV/zoneminder/src/zm_monitor.h:499:76: warning: enumerated and non-enumerated type in conditional expression [-Wextra]
499 | TriggerState GetTriggerState() const { return (TriggerState)(trigger_data?trigger_data->trigger_state:TRIGGER_CANCEL); }
| ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2021-02-27 01:27:58 +01:00
403061a39c
Fix warnings reported by -Wmissing-field-initializers
2021-02-26 22:46:09 +01:00
3ce4b3e657
Keep capture_delay in useconds instead of msecs. Fix fps by adding back in the previous sleep_time. Fix crash due to capture_image not being asigned for local cameras
2021-02-25 16:58:54 -05:00
224fcd2cd3
Merge branch 'master' of github.com:ZoneMinder/zoneminder
2021-02-25 14:58:45 -05:00
8aeb4ab758
Switch db_mutex to a std::mutex. Use modern locking with it. Use zmDbDo or dbQueue.push where appropriate. code cleanup.
2021-02-25 12:26:26 -05:00
6c013f0e65
Put back includes needed on FreeBSD. Fixes #3165
2021-02-22 08:03:10 -05:00
86d424baf0
Move closeEvent to Close(). If we are closing the camera, we have to close the event as well.
2021-02-19 20:42:36 -05:00
b9669ad69f
Log new signal on signal change
2021-02-19 15:56:30 -05:00
4ba290a9ca
Use zmDbDo where appropriate and fix some logging while holding the lock
2021-02-19 12:08:19 -05:00
045cd219f8
Move clear packetqueue logic to it's own function and call it from the analysis thread.
2021-02-18 19:25:40 -05:00
0b0df96271
Merge branch 'master' of github.com:ZoneMinder/zoneminder
2021-02-18 16:05:10 -05:00
c7dede0083
Cleanups in connect/disconnect
2021-02-18 13:47:27 -05:00
b1f337b6e7
Move setMaxVideoPackets down to where pre_event_count has a value
2021-02-18 11:54:32 -05:00
2a49bd124f
Add VNC monitor type
2021-02-17 16:39:16 -05:00
33b9dae0f2
fix use of uint32_t for buffer indexes
2021-02-17 13:38:52 -05:00
59cdf971fa
convert last_read_index and last_write_index to int32_t so that we can have -1 as a value in other functions.
2021-02-16 14:43:52 -05:00
41dc0212e0
Move include of algorithm up to top to hopefully fix issues with min and max being defined elsewhere and so compile fails
2021-02-16 10:39:04 -05:00
a82247b105
Some cleanups in disconnect
2021-02-16 10:39:04 -05:00
5a910c4a4b
use lock_guard instead of unique_lock
2021-02-12 10:45:32 -05:00
2cb6d21faf
get rid of while loop in ::Analyze. Switch login on if Ready() to bail early so we don't indent so much.
2021-02-12 10:38:21 -05:00
4915e940b7
clean out old mutex. Add event_mutex to protect around event creation/deletion
2021-02-12 10:14:35 -05:00
3d759e1fe0
Monitor: Some reformatting of previously touched lines
2021-02-11 20:02:08 +01:00
c0151caa64
Monitor: Signal by making the camera a unique_ptr the ownership relation
...
In addition we get RAII and thus automatic destruction of the camera when the monitor is destructed.
Monitor API change: getCamera -> LoadCamera
If additional properties of the camera are needed externally they should be exposed directly via Monitor.
2021-02-11 19:22:22 +01:00
91aeb325dd
Monitor: Close monitor on destruction
...
This ensures the proper shutdown sequence when not calling Close() externally (e.g when reconnecting).
2021-02-11 19:22:22 +01:00
0a665c0710
Monitor: Close the associated camera when closing the monitor
...
The camera is owned by the monitor. There is no reason to keep the camera open, when the owner is closed.
2021-02-11 19:22:22 +01:00
cca4d18d26
need <algorithm> for std::max
2021-02-10 17:29:51 -05:00
51f2d120e4
Free raw image after motion detection when doing passthrough and not saving jpegs
2021-02-10 17:07:58 -05:00
393e8b582a
Move the logic of whether to queue a packet into packetqueue::queuePacket
2021-02-10 14:11:00 -05:00
0a1bd3537d
ready_count is now max(warmup_count,pre_event_count). This should ensure that we have enough packets in the packet queue when creating an event.
2021-02-10 13:54:20 -05:00
2f5dff7244
Monitor: Don't push packets into the packet queue when in Monitor mode
...
There is no consumer for the packets in this mode, so don't queue them up. This saves quite a bit of RAM for mode of operation.
2021-02-10 16:13:47 +01:00
fab7efa003
Fix PrimeCapture on local cams. We need to be able to call it for each monitor
2021-02-09 20:29:37 -05:00
Isaac Connor
Peter Keresztes Schmidt
Isaac Connor
SirLouen
Isaac Connor
Peter Keresztes Schmidt
Admin
Isaac Connor