fa835359a1
Add install target for C binary man pages
2015-06-20 17:33:13 -05:00
13b9921680
Modify zmsystemctl pod documentation
2015-06-20 16:13:40 -05:00
fd239f6545
Generate man pages for perl scripts in the bin folder
2015-06-20 15:22:11 -05:00
f8cc27e224
Protocol for 8918W
2015-06-19 15:45:50 -04:00
991291ce67
declared so perl does not complain of globals
2015-06-19 14:12:08 -04:00
39ee845ff0
Updated 9831W foscam script
2015-06-19 12:58:40 -04:00
1f87a696cf
improve debugging for analysis check and restart if can't read shared data
2015-06-19 11:07:20 -04:00
3be4a0aa11
re-enable restarting capture process if mem invalid
2015-06-19 09:04:19 -04:00
a9175705c1
reverse the if statement to reduce indenting
2015-06-19 08:59:49 -04:00
f6a226e700
Correct bareword config entries with newer {} style
2015-05-27 10:00:24 -04:00
47192156cd
alter shutdown behaviour to send a term signal to all processes and then go through again to send a KILL if neccessary. This eliminates unneccesary sleeping.
2015-05-21 15:37:08 -04:00
d509861f9e
Merge pull request #838 from ZoneMinder/zmaudit_update1
...
Zmaudit update1: Make MIN_AGE Configurable
2015-05-21 12:10:08 -05:00
8c7e633d8f
Undo ZM_VERSION changes
2015-05-18 21:55:00 -07:00
ffe46978d2
Undid PATH change, needed for mysqldump; which I see is indeed called
...
many other places with incorrect paths.
Make macros should be setting all this up correctly!
mysqldump is [for example] in /opt/local/bin, not /usr/bin, with pkgin
2015-05-18 21:49:08 -07:00
fb5c1abc87
Undid ZM_VERSION hacks
2015-05-18 21:44:41 -07:00
12516da3dc
Patched in changes to 1.28.1 to allow OmniOS/Illumos to build and work
...
haven't attempted to build yet, there are some changes
2015-05-17 17:18:54 -07:00
8eb5e53aad
Remove with {ZM_PATH_SWAP}
2015-05-14 10:27:11 -04:00
3709ac411d
Not having ZM_AUDIT_MIN_AGE should be fatal
2015-05-13 12:36:35 -04:00
950cd06535
Revert "Revert "Switch from a MIN_AGE constant in zmaudit.pl to using a ZM_AUDIT_MIN_AGE Config setting""
...
This reverts commit 9c73b7247c
2015-05-13 11:38:55 -04:00
9c73b7247c
Revert "Switch from a MIN_AGE constant in zmaudit.pl to using a ZM_AUDIT_MIN_AGE Config setting"
...
This reverts commit a5fed03524
2015-05-13 11:37:13 -04:00
a5fed03524
Switch from a MIN_AGE constant in zmaudit.pl to using a ZM_AUDIT_MIN_AGE Config setting
2015-05-13 11:33:22 -04:00
246fadb097
support the old use of just putting the password in the control field
2015-05-13 08:23:16 -04:00
e8114c90bb
Fix printMsg. We don't use it as an object method. Update to parse a user:password out of ControlAddress which is what a lot of other scripts do.
2015-05-12 17:08:55 -04:00
c7a50a7cbc
Replace newlines with a space
2015-05-09 12:13:38 -05:00
c7c0622673
rpmbuild incorrectly interprets the text "use standard" as a Perl module dependency.
2015-05-09 12:10:12 -05:00
eddada011c
spelling corrections (thanks, /usr/bin/codespell)
2015-04-19 20:38:23 +10:00
abc8d3fdd1
ConfigData.pm: wrap extraordinary long lines using new "qqq()" function.
2015-04-19 18:15:51 +10:00
458ed9ede9
ZoneMinder.pm: minor re-wrapping
2015-04-19 18:15:23 +10:00
62c1429039
wrap long lines
2015-04-19 16:31:53 +10:00
6a150d2607
tabs-to-spaces
2015-04-19 15:17:10 +10:00
85d75b0b27
Logger.pm: define '$LOGFILE'
...
non-bareword LOGFILE should be defined.
2015-04-17 11:15:49 +10:00
59b63188cb
eliminating {Two-argument "open"}/{Bareword file handle}. See pages 202,204 of PBP. (Severity: 5)
2015-04-17 09:33:06 +10:00
3d512dbada
eliminate Subroutine prototypes
2015-04-17 09:22:47 +10:00
f02b9c94ec
PelcoP.pm: correct package declaration (thanks, perlcritic)
...
Package declaration must match filename at line 25, column 1. Correct the filename or package statement. (Severity: 5)
2015-04-17 08:24:01 +10:00
b0909a4c57
autouse Data::Dumper
2015-04-16 15:48:51 +10:00
b0d98c6052
zmx10.pl: pod2usage + readability
2015-04-16 15:48:50 +10:00
14f3c106fe
zmwatch.pl: comments to POD + readability
2015-04-16 15:48:49 +10:00
7ba03132fc
zmvideo.pl: pod2usage + readability
2015-04-16 15:48:48 +10:00
fcdd9b6fb5
zmtrigger.pl: comments to POD + readability
2015-04-16 15:48:47 +10:00
60b355cb92
zmtrack.pl: pod2usage + readability
2015-04-16 15:48:36 +10:00
6f3baca5cd
zmsystemctl.pl: pod2usage
2015-04-16 14:38:27 +10:00
b3b9647740
zm.in: tabs-to-spaces
2015-04-16 14:26:31 +10:00
1668949f18
Merge pull request #792 from knnniggett/perl
...
cmake - use perl INSTALLDIRS
2015-04-15 11:07:14 -04:00
c17d156d95
Merge pull request #798 from onlyjob/PBP
...
zmcontrol.pl, zmfilter.pl: pod2usage + readability improvements.
2015-04-13 10:19:59 -04:00
30765fdedf
hide USE_DEEP_STORAGE
2015-04-12 12:20:20 -05:00
afb127125d
zmpkg.pl: correction for "Use of uninitialized value $command in string eq at zmpkg.pl line 62"
2015-04-11 22:41:07 +10:00
fa97348535
zmpkg.pl: pod2usage, tabs-to-spaces + readability
2015-04-11 22:39:32 +10:00
ac685fd247
zmfilter.pl: pod2usage + beautification
2015-04-11 11:18:21 +10:00
fba085a1c5
zmcontrol.pl: pod2usage (draft) + minor readability improvements.
...
Looks like "zmcontrol.pl" was based upon "zmfilter.pl" so it inherited
commented description of the latter.
Therefore "zmcontrol.pl" needs a description...
2015-04-11 11:15:56 +10:00
0cf82a0b71
Allow user to override perl installation. Replace old perl cmake vars with new.
2015-04-10 12:09:01 -05:00
53907eeba1
zmcamtool.pl: readability
2015-04-11 00:35:40 +10:00
90fa57788a
zmcamtool.pl: pod2usage
2015-04-11 00:35:35 +10:00
4dee542e99
zmcamtool.pl: tabs-to-spaces
2015-04-11 00:07:36 +10:00
4bb8043fe5
zmaudit.pl: PBP/5 + readability
2015-04-10 20:34:17 +10:00
aeb3486322
zmaudit.pl: convert to pod2usage
2015-04-10 20:34:17 +10:00
e6631ebaf1
Propagate new perl changes to the ONVIF perl modules
2015-04-09 20:11:32 -05:00
373b53f8f3
zmdc.pl: Usage() --> pod2usage()
2015-04-09 03:56:04 +10:00
81860d99a6
zmdc.pl: PBP/5 + reformatting
2015-04-09 03:55:51 +10:00
a2d9c0c042
Don't copy .in files into staging
2015-04-08 12:22:46 -05:00
e895fd26f7
cmake - use perl INSTALLDIRS
2015-04-07 08:19:21 -05:00
904f2989ed
Improving ZM_USE_DEEP_STORAGE description ( #783 ):
...
Removed "If you are upgrading from a previous version of ZoneMinder" from
description. From data loss prospective it is irrelevant whether database
is upgraded or not as fresh install is just as vulnerable.
Changed "enable" to "change" to emphasize the above.
Signed-off-by: Dmitry Smirnov <onlyjob@member.fsf.org>
2015-04-06 18:39:13 +10:00
078c5aa14b
Briefly document "--migrate-events" option in zmupdate.pl ( #783 ).
...
Signed-off-by: Dmitry Smirnov <onlyjob@member.fsf.org>
2015-04-06 18:38:14 +10:00
3e8c894a3e
Update ConfigData.pm.in
2015-04-04 09:20:21 -05:00
2671e71e33
Merge pull request #763 from onlyjob/podhelp
...
POD: zmupdate.pl converted to "pod2usage"
2015-03-30 13:29:03 -04:00
5f6c559476
POD: zmupdate.pl converted to "pod2usage"
...
Best practice for POD documentation is to (re-)use it for displaying usage
info. Now `perldoc zmupdate.pl` shows expected information and we can even
generate man page automatically with `pod2man zmupdate.pl`.
Signed-off-by: Dmitry Smirnov <onlyjob@member.fsf.org>
2015-03-31 02:47:16 +11:00
b0faa138bd
POD: added missing NAME sections
...
Signed-off-by: Dmitry Smirnov <onlyjob@member.fsf.org>
2015-03-30 15:07:03 +11:00
11f7af3b03
fixing POD errors
...
manpage-has-errors-from-pod2man (forgotten '=back' before '=head2')
Signed-off-by: Dmitry Smirnov <onlyjob@member.fsf.org>
2015-03-30 14:41:01 +11:00
7ef503ff59
User configurable arp tool
2015-02-21 13:08:04 -06:00
9f3ff787d1
Merge branch '478-onvif-support' of https://github.com/altaroca/ZoneMinder into altaroca-478-onvif-support
...
Conflicts:
CMakeLists.txt
configure.ac
db/zm_create.sql.in
distros/redhat/archive/zoneminder.el6.spec
distros/redhat/zoneminder.el6.spec
web/skins/classic/views/monitor.php
2015-02-18 18:53:47 -06:00
856a8ce1d0
minor improvement removing 1 coll to time()
...
improve logging tell which monitor the event belonged to
2015-02-06 09:30:48 -05:00
20fec3ed7a
According perldoc DBI we should NOT be calling finish after processing all rows.
2015-02-04 11:15:31 -05:00
d787ad3f7a
Merge pull request #666 from ZoneMinder/kill_zmcontrol
...
Kill zmcontrol
2015-01-07 17:28:08 -06:00
21ccb9b91a
introduce the quit command which makes the resident zmcontrol.pl exit
2015-01-07 16:37:26 -05:00
a10f2aa31c
Add version to the usage line in zmx10.pl
2015-01-07 09:14:00 -05:00
7f934e0e69
Add version to the usage line in zmvideo.pl
2015-01-07 09:11:07 -05:00
5b79139a05
Add version to the usage line in zmsystemctl.pl
2015-01-07 09:07:40 -05:00
3013d87783
Add -v --version command line param to zmpkg.pl
2015-01-07 09:05:16 -05:00
8ea01e631b
Add -v --version command line param to zmfilter.pl
2015-01-07 09:00:46 -05:00
94e0ec542a
Add -v --version command line param to zmdc.pl
2015-01-07 08:47:32 -05:00
76d0dfa475
Add -v --version command line param to zmcamtool.pl
2015-01-07 08:43:51 -05:00
71c94475ff
Add -v --version command line parameters to zmaudit.pl
2015-01-06 21:08:41 -05:00
89a603cf27
Modified zmfilter.pl.in to fix #652 , crashing while processing background filter with no terms
2015-01-03 12:45:18 -05:00
4c97bd1137
Merge pull request #638 from KristofRobot/instantNotification
...
zmfilter: Send message for events that are still ongoing
2014-12-29 12:02:51 -05:00
50e6784779
this adds two config options to System tab to set the default skin and css
2014-12-17 16:45:41 -05:00
d7586c2a28
fix a bare ZM_PATH_BIN which should be $Config{ZM_PATH_BIN}
2014-12-17 16:35:30 -05:00
643438e3f2
zmfilter: Send message for events that are still ongoing
2014-12-15 08:15:59 +01:00
78f0243c69
This replaces Module::Load with Module::Load::Conditional which can actually handle errors.
...
Then I move the module load call up before the fork so that any errors will be visible and will make zmcontrol.pl die quickly instead of waiting 11 seconds for something that will never happen.
2014-12-12 16:33:18 -05:00
a52f07fa8e
Some cleanups, remove code that does nothing.
...
Instead of using ControlDevice to store the password, parse the ControlAddress to get username, password
enforce a port, which fixes the Digest Auth.
2014-12-08 15:54:27 -05:00
f69f46c2fb
Don't use Data::Dumper unless you are actually using it for debugging. No need to use ram. It is probably being included by one of the libraries anyways, but let's at least try to keep things as light as possible.
2014-11-25 14:44:08 -05:00
9d7f3c2026
Update zm.in
...
The legacy sysv init script will not work with systemd. This is by design.
2014-11-23 11:09:52 -06:00
83120e69b1
Merge pull request #584 from ZoneMinder/zmupdatefixes
...
Zmupdatefixes
2014-11-19 13:09:07 -06:00
cc989dbe19
fix putting the mode back. I merged it to the wrong place
2014-11-19 13:54:10 -05:00
f8dd2c6eaf
Merge branch 'master' into controlversionfixes
2014-11-19 12:53:28 -05:00
793998484c
Merge branch 'master' into zmupdatefixes
...
Conflicts:
scripts/zmupdate.pl.in
2014-11-19 12:47:31 -05:00
a00f719f12
Merge pull request #531 from SteveGilvarry/ffmpeg-stability-fixes
...
351-Rebase Attempt for ffmpeg stability fixes
2014-11-13 15:18:13 -06:00
5fe0b84b3c
Create 3S.pm
...
3S API Control Protocol Module
2014-11-12 08:40:35 -03:00
17e38560d6
just update the perldoc parts
2014-11-06 10:02:34 -05:00
4863ce96a3
remove annoying warning.
2014-10-31 14:12:36 -04:00
c9c6c17699
add script for TVIP862IC. Should also work with IP672 and others.
2014-10-22 15:08:58 -04:00
e23c756ca4
Revert "replace uri_encode with uri_escape"
...
This reverts commit ce5396f4ea
2014-10-21 15:17:34 -04:00
ce5396f4ea
replace uri_encode with uri_escape
2014-10-21 09:47:31 -04:00
5dedbc2135
detect when the control address has a http in front, and do the right thing
2014-10-20 16:55:24 -04:00
9ce7da4147
Don't 'use Data::Dumper'; it was only there for debug
2014-10-20 16:47:03 -04:00
a043526994
Merge pull request #462 from knnniggett/memory
...
Fix for shared data size conflict
2014-10-17 09:18:21 -04:00
58b826b0a2
more url documentation
2014-10-15 13:14:56 -04:00
348538b778
distros/ubuntu1204/changelog
2014-10-15 13:14:19 -04:00
9eb88d3f15
add a check for db connection to handle the db going away and coming back
2014-10-15 09:43:00 -04:00
a307b8a1e3
Use value from options (FFMPEG_OPEN_TIMEOUT) as timeout when calling av_open_input_file.
2014-10-12 16:23:58 +11:00
9c8419f89a
detaint to keep perl from complaining
2014-10-10 09:03:30 -05:00
19482851ff
New method to determine bitness
2014-10-10 08:10:03 -05:00
1a5844afef
auto-recreate missing folders during startup
2014-10-05 11:25:41 -05:00
56fd08d6e9
Change TMPDIR default to /var/tmp, Add ZM_SOCKDIR
2014-10-05 09:42:47 -05:00
f1b2ba091c
Update meta makefiles
2014-09-12 16:06:19 +02:00
60ed8d7366
Update ConfigData.pm.in
...
Changing the help text for DIR_EVENTS, DIR_IMAGES, and DIR_SOUNDS to make it more obvious that one should not specify a folder outside the web root and that one should probably not ever change these values from their default.
2014-09-12 08:05:15 -05:00
4d579e239a
Merge pull request #502 from knnniggett/systemd-2
...
Initial systemd support.
2014-09-03 15:59:42 -04:00
980a7a83bf
Add some text referencing the settings on the monitor settings page
2014-08-21 10:04:08 -04:00
ad364d090a
rename and process zmsystemctl.pl.in
2014-08-19 17:19:44 -05:00
411d77dc7f
remove obsoleted code
2014-08-13 19:02:59 -05:00
1e8e710f5a
full systemd support
2014-08-10 08:47:11 -05:00
7cbb079370
revert size check for now
2014-08-04 11:26:33 -04:00
254dffa633
Move ONVIF control script & add dB entry
2014-08-03 15:52:59 -05:00
a87f75eee0
any size discrepancy is caused for bailing
2014-08-01 11:27:51 -04:00
d5a7a1849a
make zmupdate re-run the most recent update.
2014-07-29 09:47:22 -04:00
fa67e21c07
Update FI9821W_Y2k.pm
...
Fixed this issue:
"my" variable $cmd masks earlier declaration in same scope at FI9821W_Y2k.pm line 138.
"my" variable $cmd masks earlier declaration in same scope at FI9821W_Y2k.pm line 141.
"my" variable $cmd masks earlier declaration in same scope at FI9821W_Y2k.pm line 144.
"my" variable $cmd masks earlier declaration in same scope at FI9821W_Y2k.pm line 154.
"my" variable $cmd masks earlier declaration in same scope at FI9821W_Y2k.pm line 156.
"my" variable $cmd masks earlier declaration in same scope at FI9821W_Y2k.pm line 195.
"my" variable $cmd masks earlier declaration in same scope at FI9821W_Y2k.pm line 222.
"my" variable $cmd masks earlier declaration in same scope at FI9821W_Y2k.pm line 247.
"my" variable $cmd masks earlier declaration in same scope at FI9821W_Y2k.pm line 275.
"my" variable $cmd masks earlier declaration in same scope at FI9821W_Y2k.pm line 302.
"my" variable $cmd masks earlier declaration in same scope at FI9821W_Y2k.pm line 329.
"my" variable $cmd masks earlier declaration in same scope at FI9821W_Y2k.pm line 356.
"my" variable $cmd masks earlier declaration in same scope at FI9821W_Y2k.pm line 383.
"my" variable $cmd masks earlier declaration in same scope at FI9821W_Y2k.pm line 399.
"my" variable $cmd masks earlier declaration in same scope at FI9821W_Y2k.pm line 414.
"my" variable $cmd masks earlier declaration in same scope at FI9821W_Y2k.pm line 448.
"my" variable $cmd masks earlier declaration in same scope at FI9821W_Y2k.pm line 671.
"my" variable $cmd masks earlier declaration in same scope at FI9821W_Y2k.pm line 690.
2014-07-22 19:06:04 +02:00
3513f87163
Fix for shared data size conflict
2014-07-07 15:56:56 -05:00
c58c4a9720
add the glue to define HOST_OS and use it to detect BSD and use different arguments to killall
2014-06-25 15:28:10 -04:00
a148e04ea2
Update zmtrigger.pl.in
...
zmtrigger.pl should not open serial port #1 by default. There could be situations where other hardware etc. would be attached to the port that is not used by zoneminder.
Better if this can be commented out by default and if a user needs serial access, he can enable it by removing the comment.
This line also gives an permissions error when running on Ubuntu which prevents zmtrigger to start. That error can probably be fixed by adding the zm user permission to the serial port. But the main issue is that if the program does not need access to the port, it should not open it.
2014-04-30 15:07:29 +02:00
fd9e808fe1
Update zmupdate.pl.in
...
Fix typo 'from' version replaced with 'to' version.
2014-03-24 13:35:53 +00:00
fbf4de5eb2
Update Wanscam.pm
...
No longer needed for zm 1.27
2014-03-19 11:56:08 -05:00
faacea50ef
Update Wanscam.pm
...
Use full package name when using ZM_VERSION
2014-03-19 11:52:58 -05:00
626c7bd6b7
pull this from the Wiki
2014-03-19 11:57:42 -04:00
189d9938cc
Add zmcamtool to autotools file manifest
2014-03-16 07:32:18 -05:00
15f014eb8b
Changes from nagyrobi:
...
Todays computer hardware and internet speeds allow for a much more responsive user interface to be ran. I suggest to optimize these values in the "High bandwidth" profile for today's technology. These values were established at least 8 years ago... There's no risk for the user because on a fresh install and new logins, new browsers "Low bandwidth" is always the default. Optimizing these values produce no noticeable load increase on modern hardware, and a snapy, pleasant user interface if desired.
Also increased event image digits because I often run into situations where very long events run out of file naming digits (max 999 files is too short, that's only 40 seconds).
2014-02-26 09:00:10 -06:00
e5ac6e95fa
Update zmupdate.pl.in
...
mysql generates a warning, instead of an error, when trying to convert to InnoDB and that engine is not available. By temporarily elevating warnings to errors, we can catch these rather than silently failing.
2014-02-04 15:30:04 -06:00
f5ce597609
final cleanup and changes before 1.27 release
2014-02-01 12:17:46 -06:00
e707e72fe3
Perl::Critic recommended a couple minor changes
2014-01-25 12:42:33 -06:00
dbe6fc539c
Additional error checking
2014-01-25 11:26:29 -06:00
ae1731477b
further refinements
2014-01-25 10:39:38 -06:00
2037afb3ca
new subroutine runQuery
2014-01-23 08:41:47 -06:00
869a139809
create rmName subroutine
2014-01-22 19:18:08 -06:00
91b0676343
Call checkName for certain reptitive tasks
2014-01-22 09:20:56 -06:00
f00e72be1e
Initial commit for new zmcamtool.pl script
2014-01-21 16:22:30 -06:00
05e395613b
Adding PTZ module for Toshiba IK-WB11A
2014-01-14 00:58:12 -08:00
5ccfa305d3
Merge pull request #294 from knnniggett/glob_ptz_scripts
...
glob ptz scripts under control folder
2014-01-06 08:50:48 -08:00
faaf237731
Revert "Broke zmfilter.pl.in in order to test travis"
...
This reverts commit acc158f3cb
2014-01-04 15:10:15 -05:00
acc158f3cb
Broke zmfilter.pl.in in order to test travis
2014-01-04 15:04:14 -05:00
d185f05006
robustness/code style changes
2014-01-03 12:55:30 -05:00
3d55dde548
COnfig fixes
2014-01-03 09:33:49 -05:00
c5afecc2b4
Revert "Introducing a bug in zmfilter.pl.in to test travis"
...
This reverts commit 337750430b
2014-01-02 12:15:06 -05:00
337750430b
Introducing a bug in zmfilter.pl.in to test travis
2014-01-02 12:02:07 -05:00
07b4d83d74
Have Usage() in zmcontrol.pl exit 0 instead of -1
2014-01-02 11:50:39 -05:00
0eac723409
glob ptz scripts under control folder
2014-01-01 12:17:13 -06:00
20dd76b354
Using the full path for ZM_VERSION. Using "Control Device" value for user/password.
2014-01-01 13:16:53 +01:00
3fb76eaf35
Initial version of control file for Foscam IP cameras.
...
Taken from http://www.zoneminder.com/wiki/index.php/Foscam
2013-12-29 22:24:35 +01:00
7b26636bcd
Merge pull request #280 from ZoneMinder/zmfixremoval
...
Remove zmfix
2013-12-22 11:22:18 -08:00
e9bb632a78
Remove zmfix
2013-12-22 16:08:17 +02:00
b5e4e1e573
Update FI8608W_Y2k.pm
...
Fix typo
2013-12-21 11:32:47 -06:00
2cadb3c5a6
Fixed a small typo in ConfigData.pm.in
2013-12-21 10:55:36 -05:00
7251a8e1ae
fixes to $Config changes, also exit if no EVENT_PATH
2013-12-19 13:41:55 -05:00
4d9234089c
fix ZM_URL to $Config{ZM_URL}
2013-12-19 13:01:52 -05:00
462108583b
fix ZM_EVENT_PATH
2013-12-19 12:55:14 -05:00
42642937e4
fix ZM_VERSION
2013-12-17 13:05:58 -05:00
9e7d729ca8
use the full path for ZM_VERSION
2013-12-17 12:06:14 -05:00
2ced76c20d
do this one too
2013-12-17 11:24:33 -05:00
8777295468
use fully specified version
2013-12-17 11:23:03 -05:00
1d338ed879
more
2013-12-16 16:36:12 -05:00
48a6dcf5ce
Change COnfig from using the subroutine symbol table to just using a global hash
2013-12-16 16:32:02 -05:00
b0b471eb5b
Update zm.in
2013-12-14 09:13:49 -06:00
cd43496a7d
Update zm.in
...
Don't think this is needed. This may contribute to the corrupt Config table issue
2013-12-14 09:05:15 -06:00
c3c3cfbfb9
Merge pull request #264 from ZoneMinder/improvezmpkg
...
Use proper DBI parameter passing in zmpkg.pl to improve security
2013-12-13 10:34:48 -08:00
f39f2fab66
Merge pull request #241 from ZoneMinder/alarmrefblendoption
...
Add alarm reference image blend percentage option and replace the text field if fast blends are enabled
2013-12-13 10:13:34 -08:00
2775752a41
use proper DBI parameter passing to improve security
...
remark out call to zmupdate.pl -f
2013-12-06 16:46:21 -05:00
150b3a0e7a
document interactive command line option
...
only do innoDB upgrade if interactive
2013-12-06 13:47:39 -05:00
f6dca0f575
Fixing bug that stops installation/upgrade if DB is already at current version
2013-11-20 10:39:51 +01:00
7da2cdd159
cleanups, only connect and disconnect once. Remove unncessary require's of DBI
...
cleanup MyISAM to InnoDB code
2013-11-13 11:45:53 -05:00
29e2cdf561
split the innoDB upgrade out of the version section, so that it always checked for MyISAM tables and if found, offers to update them.
2013-11-13 09:42:10 -05:00
8c0ad352f5
Fix shared memory errors on centos 6.4
2013-11-08 14:53:01 -05:00
f4dfd88d9f
handle bad config lines better
2013-11-06 17:02:01 -05:00
be21a882ab
Merge pull request #242 from ZoneMinder/removeversionnumberfromzm.conf
...
Remove ZM_VERSION from zm.conf
2013-11-04 12:27:50 -08:00
7a2f3b5226
add in missing @
2013-11-04 09:57:00 -05:00
9d5ac7ae8c
Fix cmake installing wrong files in an out-of-source build
2013-11-04 09:56:40 +02:00
408cac5120
Remove the ZM_BLEND_ALARMED_IMAGES option (not needed anymore, global per monitor now)
2013-11-04 09:11:33 +02:00
1d0e721ba2
Attempt to get the perl modules to be fully out of source during an out-of-source build
2013-11-03 00:20:49 +02:00
d428c832e7
blah
2013-11-01 09:50:50 -04:00
72b80d7417
remake this branch off master instead of off mysql2PDO.
...
Establish an automake substitution of @VERSION@ and use it throughotu to override whatever is in zm.conf
2013-11-01 09:47:28 -04:00
c2bd7c97ec
First attempt at enabling out-of-source building for zm with cmake
2013-10-31 18:10:00 +02:00
36f525efae
Correctly hard code man dir path into cmake this time hopefully
2013-10-29 12:43:28 +02:00
604b7f4ccc
Clean files generated by MakeMaker when running cmake's make clean target
2013-10-29 11:21:23 +02:00
23ec8266d9
Hard code man dir path into cmake to fix issues with some distros
2013-10-29 11:02:47 +02:00
0143969498
Do not print progress while building zoneminder perl modules unless CMAKE_VERBOSE_MAKEFILE is enabled
2013-10-29 10:01:29 +02:00
54a22e7fe8
We need a toggle for x10 support
2013-10-19 09:22:59 -05:00
b558d42cdc
Improvements to cmake: Better support for CMAKE_PREFIX_PATH enviroment variable (and similar ones), added ZM_PERL_SUBPREFIX and ZM_PERL_USE_PATH options and improved detection of libraries and headers
2013-10-09 15:41:14 +03:00
03d12ef3e4
Point zmupdate to the github pages site (non-https) for version numbers
2013-10-07 10:11:09 -04:00
ba727a5611
Changed default HTTP version to 1.0 instead of 1.1, as we don't fully support important HTTP/1.1 features such as chunked encoding
2013-10-07 16:57:26 +03:00
1609fd688b
Changed default option of ZM_COLOUR_JPEG_FILES to no. It impacts performance and is not needed anymore, all modern image viewers support grayscale JPEG images
2013-10-07 16:54:13 +03:00
6b11db11ca
Update CMakeLists.txt
...
Need the zm.in file to be processed by CMake
2013-10-06 17:43:59 -05:00
32ee0a8976
create ZM_PATH_DATA and point zmupdate to ZM_PATH_DATA/db
2013-10-05 18:40:54 -05:00
d0cbb3f498
remove ${CMAKE_CURRENT_SOURCE_DIR} from add_custom_target
2013-10-05 14:29:12 -05:00
3dbef94b04
Removed INSTALLDIRS from the cmake perl modules CMakeLists.txt
2013-10-04 22:50:50 +03:00
5607f2823f
Fixed missing perl5 in path in the last commit
2013-10-04 22:40:09 +03:00
9c3540a952
Attempt to fix issues with perl paths that andy is experiencing
2013-10-04 22:35:16 +03:00
60258e7aa1
Check the size of the mmap file before mmaping it. If the mmap file 0 ( can happen with remote cameras that can't be reached because it is offline ) we get sigbus. I think the mmap succeeds, but is zero sized, so the first access causes SIGBUS.
2013-10-04 11:54:21 -04:00
34f84a4097
Merge branch 'v1.26.4-beta'
2013-10-03 10:14:09 -04:00
79b45bec68
Avoid trouble with whitespaces in current directory path
2013-10-03 15:37:46 +03:00
883e676e29
Fixed path issues when creating packages (rpms and such)
2013-10-03 15:35:10 +03:00
489e832cf6
Fixed typo in the last commit
2013-10-03 15:15:59 +03:00
f043c6e955
Changed perl paths again, this time to <prefix>/<libdir>/perl5 and few improvements
2013-10-03 15:08:09 +03:00
5fce4c516b
Perl modules will be now be installed in <prefix>/<datadir>/zoneminder/perl5
2013-10-01 17:38:51 +03:00
48f11a8064
Add cmake to zoneminder
2013-09-28 12:59:50 +03:00
ab4c091693
change eq's to le's so that it runs scripts for upgrading from 1.26.0
2013-09-15 12:59:45 -04:00
ab1314f250
clean out autogenerated files
2013-09-12 14:43:57 -04:00
e21a08c4b6
new code to look for update scripts instead of having distinct lines for each
2013-09-12 14:40:02 -04:00
0bf9aacab2
Update zmupdate.pl.in for 1.26.3 release
2013-09-10 12:46:33 -05:00
caa73f608b
Merge remote-tracking branch 'origin/develop'
2013-09-09 16:44:58 +03:00
6c134f9b4b
Merge pull request #116 from knnniggett/zmupdate_newrelease
...
Add 1.26.1 and 1.26.2 releases to zmupdate
2013-09-07 19:07:37 -07:00
8f3d95fd38
modify zmupdate.pl.in
2013-09-07 15:11:57 -05:00
9c7f02e8c0
Merge branch 'develop' of github.com:ZoneMinder/ZoneMinder into develop
...
Conflicts:
scripts/zmupdate.pl
2013-09-06 14:44:21 -04:00
0a9e63ca2c
remove autogenerated files
2013-09-06 14:40:55 -04:00
4cc878e930
Merge branch 'release-1.26' into develop
...
Conflicts:
scripts/ZoneMinder/lib/ZoneMinder/ConfigData.pm
2013-09-05 11:40:38 -04:00
d6440ca70e
Change repo to ZoneMinder for pull request
2013-09-05 23:50:51 +12:00
e792c8eb44
Move version check from zoneminder.com to repository
2013-09-05 23:40:03 +12:00
c8ad6ae656
Fixes #107 for real this time.
2013-09-05 20:31:52 -04:00
52116f9642
Merge pull request #84 from knnniggett/patch-5
...
Update zmupdate.pl.in to give option to convert to InnoDB tables
2013-08-30 18:47:34 -07:00
69f31d9e90
Merge pull request #85 from knnniggett/addptzcameras
...
Add PTZ control files and presets for FOSCAM FI8608W PT, FI8620 PTZ, 9821W PTZ and Loftek Sentinel IP
2013-08-26 09:48:37 -07:00
2f456967f4
edit zmupdate function in init script
...
Noticed the init script was looking for a zm_update, which doesn't exist. My best guess is that this should be changed to zmupdate.pl. This causes zoneminder to reload its configuration from the database prior to startup. Thoughts?
2013-08-22 14:13:22 -05:00
8608250b06
This adds PTZ control files and camera presets for specific ptz cameras.
2013-08-22 13:20:38 -05:00
594a44cbbb
Update zmupdate.pl.in to give option to convert to InnoDB tables
...
When upgrading the zoneminder database to 1.26, this proposed change will ask the user to convert existing MyISAM tables over InnoDB. It first scans for existing MyISAM tables and will skip over any tables that are already converted to InnoDB.
I've tested this on (a copy of) a production database server and have verified it doesn't alter existing tables from a different schema.
And I'm done messing with the zmupdate script. I promise.
I understand if this change is considered outside the scope of a current bug fix release.
2013-08-20 19:49:02 -05:00
3afad1a0a8
have to override ZoneMinder::Database::ZM_DB_USER, etc instead of just ZM_DB_USER.
2013-08-20 15:13:50 -04:00
34bfcb5e7e
add lines to change the ZM_DB_USER and ZM_DB_PASS when the user and password are supplied on the command line.
...
This is neccessary when the regular zm user does not have alter privileges.
2013-08-19 11:19:34 -04:00
0a79e4a975
1.26 Beta did not install SkyIPCam7xx.pm Control Script. Fixes #38
2013-08-15 09:08:51 -04:00
940f7a191e
add code to add Colours and Deinterlacing to Monitors table. These were added by mastertheknife's perfpatch.
2013-08-13 11:05:20 -04:00
c014f3faaa
delete generated files
2013-08-13 10:06:37 -04:00
1888bec092
Doing my best to manually remove nextime's plugin architecture while keeping his other changes.
2013-08-13 09:43:23 -04:00
cdac403fb1
Merge ../zum into develop
...
Conflicts:
AUTHORS
configure.ac
db/zm_create.sql.in
scripts/ZoneMinder/lib/ZoneMinder/ConfigData.pm.in
scripts/zmupdate.pl.in
src/Makefile.am
src/zm_buffer.cpp
src/zm_config_defines.h
src/zm_event.cpp
src/zm_ffmpeg.h
src/zm_ffmpeg_camera.cpp
src/zm_image.cpp
src/zm_jpeg.h
src/zm_local_camera.cpp
src/zm_logger.cpp
src/zm_mem_utils.h
src/zm_monitor.cpp
src/zm_monitor.h
src/zm_mpeg.cpp
src/zm_remote_camera_http.cpp
src/zm_remote_camera_rtsp.cpp
src/zm_rtsp.cpp
src/zm_sdp.cpp
src/zm_sdp.h
src/zm_stream.cpp
src/zm_thread.cpp
src/zm_thread.h
src/zm_threaddata.cpp
src/zm_user.cpp
src/zm_user.h
src/zm_utils.cpp
src/zm_zone.cpp
src/zm_zone.h
web/includes/actions.php
web/lang/big5_big5.php
web/lang/cn_zh.php
web/lang/cs_cz.php
web/lang/de_de.php
web/lang/dk_dk.php
web/lang/en_gb.php
web/lang/es_ar.php
web/lang/et_ee.php
web/lang/fr_fr.php
web/lang/he_il.php
web/lang/hu_hu.php
web/lang/it_it.php
web/lang/ja_jp.php
web/lang/nl_nl.php
web/lang/pl_pl.php
web/lang/pt_br.php
web/lang/ro_ro.php
web/lang/ru_ru.php
web/lang/se_se.php
web/skins/classic/js/skin.js
web/skins/classic/views/js/monitor.js.php
web/skins/classic/views/monitor.php
web/skins/classic/views/zone.php
2013-07-25 11:49:55 -04:00
3a8481a591
cleanup
2013-05-10 14:02:22 -04:00
a468baf9eb
cleanup
2013-05-10 13:55:45 -04:00
9d89fb3bcb
Merge branch 'kfir-proper' into develop
2013-05-10 12:23:58 -04:00
7cf5475542
Merge ../ZoneMinder-kfir into kfir-proper
...
Conflicts:
configure
src/Makefile.am
src/Makefile.in
2013-05-02 21:28:51 -04:00
ca4e6b455e
look for script in installed bath, not build location
2013-04-29 13:46:37 -04:00
d458c145a3
Add Brian Rudy's script to control SkyIPCam cameras.
2013-04-29 12:04:12 -04:00
33cbd89212
Migrate svn to git
2013-03-17 00:45:21 +01:00
f27b424503
Much more progress!
...
1) Removed the V4L2_CAPTURE_FIELDS option.
2) V4L2 Interlacing control options added to the new per-monitor deinterlacing option.
3) Fixed the 32bit version of Linear.
4) Added Blend (50%) and Blend (25%).
5) Completed the grayscale version of the Four Field Motion Adaptive deinterlacing algorithm.
2012-07-13 20:11:16 +03:00
4996dd0a51
Recreated generated files.
...
git-svn-id: http://svn.zoneminder.com/svn/zm/trunk@3662 e3e1d417-86f3-4887-817a-d78f3d33393f
2012-07-04 09:46:18 +00:00
0932f50d80
1) Added the image size and format to the shared memory. This is useful for viewer applications relying on the shared memory.
...
2) Small changes to improve the response time of the DVR controls. Going through frames in a paused event is now much faster.
2012-03-22 08:30:57 +02:00
60a042e44b
Fixed an error in zmMemWrite(), breaking shared memory writes from perl, which prevented zmtrigger.pl (and perhaps others) from working.
2012-03-12 19:52:53 +02:00
de2df49d64
1) Added support for the new formats to the mpeg code.
...
2) Fixed unwanted extra call to set video format for local cameras.
3) Small changes to the perl shared memory types.
2012-02-01 07:33:20 +02:00
8ac3dda54b
1) Removal of the ZM_LOCAL_BGR_INVERT option.
...
2) Allow FPS reporting interval to be zero again.
3) Added translation for the new texts.
4) Corrected the blend function declaration.
2012-02-01 07:33:20 +02:00
2fd6e99ec5
1) Rebased to 1.24.4
...
2) Reverted to stock zmdc.pl.in and zmwatch.pl.in because the bugs are fixed
3) Updated configure and Makefile files
2012-02-01 07:33:20 +02:00
b0bc227232
1) Made shared memory 16 byte aligned and identical size and layout for all platforms.
...
2) Fixed a bug in zmwatch.pl: Not freeing shared memory handles between iterations.
3) Modified default monitor options to simplify new monitor creation.
2012-02-01 07:33:20 +02:00
33119c6dc5
1) Added image size requirements to ensure proper alignment
...
2) Changed image class buffer related functions
3) Improved format selection for local cameras
4) Removed imagesize check for swscale
5) Fixed mmap unexpected memory size when changing capture options
6) Fixed unrelated bug in zmdc.pl: sockets directory doesn't exist
2012-02-01 07:33:20 +02:00
Andrew Bauer
Pliable Pixels
Isaac Connor
Andrew Bauer
Rick Sayre
Dmitry Smirnov
Isaac Connor
abauer
Stephen Arthur
Kristof Robot
jmcastro2014
Sune1337
Jan M. Hochstein
Kyle Johnson
Florian Asche
Martin Hagelin
barjac
tim
Kyle Johnson
Dmitry Katsubo
Kfir Itzhak
Bartek Zdanowski
Patrick McGuire
Isaac Connor
Isaac Connor
Chris Wiggins
nextime
stan