b238a2bc25
Implement decoder thread, locking is broken
2021-03-15 15:08:43 -04:00
644d6d34a4
Must init video_stream_id and audio_stream_id
2021-03-10 17:23:44 -05:00
41085c9e5c
Remove final bits of zm_video writer.
2021-03-08 22:14:13 -05:00
e38e8a2775
Actually use zmc_heartbeat_time. Set it on every capture and use it in ShmValid to determine if zmc has gone away.
2021-03-08 09:30:53 -05:00
9e77324de4
Replace raw mysql_query calls with the zmDb* functions
...
With this we can make sure we have proper locking of our DB connection at all times.
2021-03-06 00:12:18 +01:00
fa22129966
Make last_alarm_count last alarmed frame while only in ALARM state to make post_event_count counts since here not alone alarmed frames that don't shot alarms.
2021-03-04 20:20:02 +01:00
e67626b4e2
logger: Move log_mutex to std::recursive_mutex
2021-03-03 23:31:53 +01:00
20fe6153d5
Don't treat data packets as video
2021-03-03 15:52:39 -05:00
b87d859f72
Set the packet's stream_index to the packetqueue stream. Rename get_ functions to get
2021-03-03 12:06:34 -05:00
a01a24ec36
Add loading SecondPath in monitor
2021-03-03 09:56:33 -05:00
46ec4e75d4
Check codec type instead of stream_index to determine video/audio
2021-03-03 09:52:27 -05:00
4ff016c991
Make capturing/analysing log lines follow same pattern
2021-03-02 20:51:16 +01:00
be1b439dcc
Add State_Strings and code cleanup. Fix not going into alarm state when already recording. Fixes #3184
2021-03-02 14:42:54 -05:00
f35a1c70c0
fix build with old avcodec for xenial
2021-03-02 12:07:51 -05:00
c03d9b2987
Set state before we write packets to event so that the event knows that it is alarmed
2021-03-02 11:47:55 -05:00
71d65685b9
Can't clear image data early. Might be needed for snapshot and pre alarm farmes
2021-03-02 11:12:57 -05:00
46743ebaab
Silence compile warning
2021-03-02 10:00:48 -05:00
832eabbd79
Don't both updating analysis fps unless we are doing motion detection
2021-03-02 09:59:32 -05:00
1bc5abb9e9
Only include video packets in analysis_image_count
2021-03-01 17:07:09 -05:00
51c19912f8
Use analysis_image_count in opening new event log line
2021-03-01 16:56:47 -05:00
9302c9506e
Add audio_frequency and audio_channels to shared mem and set them in PrimeCapture
2021-03-01 16:49:27 -05:00
6e73c08a21
add fifo's for video and audio. Write the packet data to them. Update FifoStream->Fifo
2021-03-01 16:49:26 -05:00
6c6d6c51b0
Add RTSPSTreamName loading and write packet data to the video and audio fifos
2021-03-01 16:46:48 -05:00
33dbcc449a
Merge pull request #3181 from Carbenium/rgb-const
...
rgb: Convert some constant defines to constexpr
2021-03-01 09:40:39 -05:00
71d864d77b
Merge pull request #3182 from Carbenium/monitor-includes
...
monitor: Move system includes back to their original location
2021-03-01 09:40:08 -05:00
3b3ecb89b2
monitor: Move system includes back to their original location
...
41dc0212e0cf9406a1e8
2021-03-01 00:45:57 +01:00
76e6c468e8
rgb: Convert some constant defines to constexpr
...
Using defines interferes with fmt.
Also rename them according to the Google styleguide.
2021-03-01 00:38:21 +01:00
741e67e8cd
ALERT also mean warming up with alarm_frame_count value before returning to ALARM....
2021-02-28 22:42:29 +01:00
6a47780f60
Fix a warning reported by -Wextra
...
/home/peterke/DEV/zoneminder/src/zm_monitor.h: In member function ‘Monitor::TriggerState Monitor::GetTriggerState() const’:
/home/peterke/DEV/zoneminder/src/zm_monitor.h:499:76: warning: enumerated and non-enumerated type in conditional expression [-Wextra]
499 | TriggerState GetTriggerState() const { return (TriggerState)(trigger_data?trigger_data->trigger_state:TRIGGER_CANCEL); }
| ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2021-02-27 01:27:58 +01:00
403061a39c
Fix warnings reported by -Wmissing-field-initializers
2021-02-26 22:46:09 +01:00
3ce4b3e657
Keep capture_delay in useconds instead of msecs. Fix fps by adding back in the previous sleep_time. Fix crash due to capture_image not being asigned for local cameras
2021-02-25 16:58:54 -05:00
224fcd2cd3
Merge branch 'master' of github.com:ZoneMinder/zoneminder
2021-02-25 14:58:45 -05:00
8aeb4ab758
Switch db_mutex to a std::mutex. Use modern locking with it. Use zmDbDo or dbQueue.push where appropriate. code cleanup.
2021-02-25 12:26:26 -05:00
6c013f0e65
Put back includes needed on FreeBSD. Fixes #3165
2021-02-22 08:03:10 -05:00
86d424baf0
Move closeEvent to Close(). If we are closing the camera, we have to close the event as well.
2021-02-19 20:42:36 -05:00
b9669ad69f
Log new signal on signal change
2021-02-19 15:56:30 -05:00
4ba290a9ca
Use zmDbDo where appropriate and fix some logging while holding the lock
2021-02-19 12:08:19 -05:00
045cd219f8
Move clear packetqueue logic to it's own function and call it from the analysis thread.
2021-02-18 19:25:40 -05:00
0b0df96271
Merge branch 'master' of github.com:ZoneMinder/zoneminder
2021-02-18 16:05:10 -05:00
c7dede0083
Cleanups in connect/disconnect
2021-02-18 13:47:27 -05:00
b1f337b6e7
Move setMaxVideoPackets down to where pre_event_count has a value
2021-02-18 11:54:32 -05:00
2a49bd124f
Add VNC monitor type
2021-02-17 16:39:16 -05:00
33b9dae0f2
fix use of uint32_t for buffer indexes
2021-02-17 13:38:52 -05:00
59cdf971fa
convert last_read_index and last_write_index to int32_t so that we can have -1 as a value in other functions.
2021-02-16 14:43:52 -05:00
41dc0212e0
Move include of algorithm up to top to hopefully fix issues with min and max being defined elsewhere and so compile fails
2021-02-16 10:39:04 -05:00
a82247b105
Some cleanups in disconnect
2021-02-16 10:39:04 -05:00
5a910c4a4b
use lock_guard instead of unique_lock
2021-02-12 10:45:32 -05:00
2cb6d21faf
get rid of while loop in ::Analyze. Switch login on if Ready() to bail early so we don't indent so much.
2021-02-12 10:38:21 -05:00
4915e940b7
clean out old mutex. Add event_mutex to protect around event creation/deletion
2021-02-12 10:14:35 -05:00
3d759e1fe0
Monitor: Some reformatting of previously touched lines
2021-02-11 20:02:08 +01:00
c0151caa64
Monitor: Signal by making the camera a unique_ptr the ownership relation
...
In addition we get RAII and thus automatic destruction of the camera when the monitor is destructed.
Monitor API change: getCamera -> LoadCamera
If additional properties of the camera are needed externally they should be exposed directly via Monitor.
2021-02-11 19:22:22 +01:00
91aeb325dd
Monitor: Close monitor on destruction
...
This ensures the proper shutdown sequence when not calling Close() externally (e.g when reconnecting).
2021-02-11 19:22:22 +01:00
0a665c0710
Monitor: Close the associated camera when closing the monitor
...
The camera is owned by the monitor. There is no reason to keep the camera open, when the owner is closed.
2021-02-11 19:22:22 +01:00
cca4d18d26
need <algorithm> for std::max
2021-02-10 17:29:51 -05:00
51f2d120e4
Free raw image after motion detection when doing passthrough and not saving jpegs
2021-02-10 17:07:58 -05:00
393e8b582a
Move the logic of whether to queue a packet into packetqueue::queuePacket
2021-02-10 14:11:00 -05:00
0a1bd3537d
ready_count is now max(warmup_count,pre_event_count). This should ensure that we have enough packets in the packet queue when creating an event.
2021-02-10 13:54:20 -05:00
2f5dff7244
Monitor: Don't push packets into the packet queue when in Monitor mode
...
There is no consumer for the packets in this mode, so don't queue them up. This saves quite a bit of RAM for mode of operation.
2021-02-10 16:13:47 +01:00
fab7efa003
Fix PrimeCapture on local cams. We need to be able to call it for each monitor
2021-02-09 20:29:37 -05:00
727594e3af
Fix rotated images by allocating image with camera dimensions
2021-02-09 14:53:14 -05:00
05b5927f01
Don't queue audio packets if we aren't saving audio
2021-02-09 11:54:38 -05:00
6fd6654488
Monitor: Don't segfault in closeEvent if mmap is already unmapped
2021-02-08 19:47:40 +01:00
192aae8e30
small space and code doc
2021-02-08 09:04:06 -05:00
061140958c
Only update videodata if shared_data is active
2021-02-08 09:04:06 -05:00
3376b44290
Monitor: Fix a segfault when loading local cameras
2021-02-08 12:25:18 +01:00
f43507dce0
Use the power of smart pointers to manage Monitor instances
2021-02-07 21:20:45 +01:00
ace93e2422
fix event start packets getting deleted while writing because we don't have a lock on them.
2021-02-06 20:11:38 -05:00
c28e1b09e5
Fix compile when using sysv shm
2021-02-06 20:11:38 -05:00
513739aeb5
Merge pull request #3127 from Carbenium/header-cleanup
...
Cleanup and reorganize includes
2021-02-04 12:52:04 -05:00
0dbc39ee25
Cleanup and reorganize includes
...
With this commit a unified structure for includes is introduced.
The general rules:
* Only include what you need
* Include wherever possible in the cpp and forward-declare in the header
The includes are sorted in a local to global fashion. This means for the include order:
0. If cpp file: The corresponding h file and an empty line
1. Includes from the project sorted alphabetically
2. System/library includes sorted alphabetically
3. Conditional includes
2021-02-04 18:02:01 +01:00
046e352304
improvements to fps reporting. In analysis, we report based on image packets processed, but the fps value is calculated based on the count of images we did motion detection on. We no longer count audio packets in capture fps reporting.
2021-02-04 11:50:01 -05:00
c61e6a8c56
If there is an open event in disconnect close it. The idea is that by the time we get to the destructor we should be all shut down
2021-02-03 17:04:40 -05:00
cb60b6c141
Fix bulk frame code and move it to event. Revert base score to 0. Fix cause of continuous events. Move GetState to .h
2021-02-03 16:57:44 -05:00
be1db1ff20
Score should be a signed int
2021-02-03 09:08:06 -05:00
0958768ce5
Fix no bulk frames by setting score to -1 which means BULK. It will get changed to 0 or more by later code. Fixes #3121
2021-02-02 23:19:53 -05:00
38368a8b9d
remove deprecated video_buffer_duration stuff. Fix loading monitor column order
2021-02-02 23:19:53 -05:00
afa5e27d56
load RTSPServer column as well. start_it needs to be tracked by packetqueue. We no longer close the camera in Monitor::Close because we need to clear the packetqueue, then wait for threads to finish, THEN close camera. So that logic needs to move to zmc
2021-02-02 23:19:52 -05:00
e09fa1bebf
Remove includes of <cinttypes>
...
Instead of including <cinttypes> directly, zm_define.h should be used
to get the typedef'ed types as well.
2021-02-02 21:37:26 +01:00
a5417cfe6c
NULL=>nullptr. Update analysis_fps earlier on startup
2021-02-01 16:01:09 -05:00
0676c7cfb4
Use packetqueue::free_it to release iterators
2021-02-01 10:24:58 -05:00
dd57d05f40
Convert packetqueue from a pointer to a packetqueue to a member packetqueue that is always available. Add methods to set packetqueue parameters. Emptying the queue is now in packetqueue::clear()
2021-01-31 21:31:33 -05:00
e08060af3f
Free linked monitors
2021-01-31 11:57:43 -05:00
e084780123
Remove no longer used pre_event buffer and event_delete_thread
2021-01-31 10:09:03 -05:00
00114d32bc
Minor code improvements ostly just being more specific about parenthesis
2021-01-30 20:35:10 -05:00
b93aab6a11
turn off hwtransfer direct to image. Too compliated for now with not enough benefit
2021-01-30 12:34:29 -05:00
ac88567ee2
fix
2021-01-29 17:32:22 -05:00
5581cdafb6
must increment iterators in the packetqueue lock
2021-01-29 17:30:39 -05:00
7923e0c279
fix min_section_length not being honoured
2021-01-27 18:13:16 -05:00
1ca93c4211
accept packets with image as video
2021-01-27 12:49:54 -05:00
4dcce4ac95
Merge branch 'rtsp_server'
2021-01-26 14:22:10 -05:00
e4831909d6
get_packet can return null if we are terminating
2021-01-26 12:22:26 -05:00
f9fc10b394
When not capturing don't try to create mmap. Fixes #3112
2021-01-22 12:23:13 -05:00
f1686cfe9a
When not capturing don't try to create mmap. Fixes #3112
2021-01-22 12:11:43 -05:00
66c78e5a9b
Merge branch 'zma_to_thread' into rtsp_server
2021-01-19 13:43:25 -05:00
256080abb1
Fix crash of Reload() due to Load() clearing shared_data and mem_ptr. Load() shouldn't do these kinds of initialisations.
2021-01-19 09:44:53 -05:00
68b0f7e1b5
initialize packetqueue, analysis_it, storage and videostore in Monitor constructor initializer. Only delete packetqeuue if it has been created.
2021-01-15 14:42:26 -05:00
10e56df53c
analysis_limit > cpature fps: only log a warning if we have actually been capturing for a while. If doing passthrough, need to start continuous event from last keyframe
2021-01-15 11:54:36 -05:00
164a0f5a44
Need to use get_packet so that packets getting written to event are locked. Because queuePacket might delete them.
2021-01-12 14:11:47 -05:00
e8d06f702c
Handle signal loss, improve debugging
2021-01-11 13:46:50 -05:00
46a8bb22fb
get camera if we havn't already. Don't delete the timestamp in shared zmpackets because it is just a pointer to shmem. Set it to null instead so that ~ZMpacket doesn't try to free it
2021-01-11 13:46:50 -05:00
Isaac Connor
Isaac Connor
Peter Keresztes Schmidt
Admin
Isaac Connor
Peter Keresztes Schmidt
Isaac Connor