9463cf8565
I can't imagine what fps_report_interval has to do with event being longer than section_length. Use analysis_image_count in log
2021-03-29 09:57:57 -04:00
52cb182ae3
Load max_image_buffer_count in monitor and set it in packetqueue. rename max_video_packet_count to pre_event_video_count in packetqueue and adjust logic. When queuing packets check to ensure that we aren't going over. Delete packets from front if possible, do not queue packet if not possible
2021-03-26 14:26:37 -04:00
b8b20917be
setKeepKeyframes when not PASSTHROUGH
2021-03-22 12:05:22 -04:00
4e8c7d1f7c
Eliminate non-thread-safe calls to localtime
...
localtime uses an internal static storage to which a pointer is given as return value.
Due to this it is not safe to call localtime from multiple threads since the same static storage is used.
Use localtime_r instead which allows to pass in a tm struct.
Fixes:
https://github.com/ZoneMinder/zoneminder/security/code-scanning/24
https://github.com/ZoneMinder/zoneminder/security/code-scanning/25
https://github.com/ZoneMinder/zoneminder/security/code-scanning/26
https://github.com/ZoneMinder/zoneminder/security/code-scanning/27
https://github.com/ZoneMinder/zoneminder/security/code-scanning/28
https://github.com/ZoneMinder/zoneminder/security/code-scanning/30
https://github.com/ZoneMinder/zoneminder/security/code-scanning/31
https://github.com/ZoneMinder/zoneminder/security/code-scanning/33
https://github.com/ZoneMinder/zoneminder/security/code-scanning/58
https://github.com/ZoneMinder/zoneminder/security/code-scanning/59
https://github.com/ZoneMinder/zoneminder/security/code-scanning/63
https://github.com/ZoneMinder/zoneminder/security/code-scanning/64
https://github.com/ZoneMinder/zoneminder/security/code-scanning/65
2021-03-21 21:42:02 +01:00
7c9eb42ebb
Merge branch 'master' into 3197-record-event-close-mode
2021-03-21 13:03:26 -04:00
a042e4bf77
spacing
2021-03-20 19:27:18 -04:00
db7e9edcab
Issue #3197 Improvement
2021-03-21 00:00:36 +01:00
33f98a0d40
Issue #3197 Add RECORD to Event_Close_Mode time
2021-03-20 20:02:52 +01:00
edefbfcad6
Remove assumptions about Analysis being about motion detection. Fixes mem leaks in Monitor mode
2021-03-18 09:24:27 -04:00
f4506a8f35
We always need an analysis thread.
2021-03-17 23:41:00 -04:00
ccb1bc1a7d
Have to wait until we are finished with the packet before unlocking.
2021-03-17 16:11:31 -04:00
fb28c6b365
Fix login in Decode for non-ffmpeg monitors
2021-03-17 15:53:14 -04:00
284fe52b5f
fix double stop/free of decoder and analysis threads
2021-03-17 12:57:45 -04:00
dca34544ec
move analysis thread into monitor. populate analysis_it and decoder_it in Prime instead of constantly checking for them. Handle cases where LockedPacket are null due to shutdown
2021-03-17 12:47:52 -04:00
657a5edda4
If decoding disabled, set signal and last_write_time in the Capture thread. So that zm_watch knows we are alive
2021-03-17 10:11:06 -04:00
74616d1061
Update CaptureFPS SQL to just do an update and don't use static sql. TThis may fix a signal 6 crash that we have been seeing
2021-03-17 10:06:45 -04:00
12ed02a5b0
Move trigger detection before motion detection. Only wait for decoding if decoding is enabled
2021-03-16 20:07:59 -04:00
5e54a63bd5
Only load zones if doing something other than QUERY. Only delete decoder if there is one.
2021-03-16 13:26:40 -04:00
76267bc57f
put back deleting the raw image when not saving jpegs. We only need it for the snapshot and that should be the alarmed image anyways.
2021-03-16 12:08:11 -04:00
9903e909af
Rework locking in ZMPacket by using a new class called ZMLockedPacket.
2021-03-15 17:05:30 -04:00
b238a2bc25
Implement decoder thread, locking is broken
2021-03-15 15:08:43 -04:00
644d6d34a4
Must init video_stream_id and audio_stream_id
2021-03-10 17:23:44 -05:00
41085c9e5c
Remove final bits of zm_video writer.
2021-03-08 22:14:13 -05:00
e38e8a2775
Actually use zmc_heartbeat_time. Set it on every capture and use it in ShmValid to determine if zmc has gone away.
2021-03-08 09:30:53 -05:00
9e77324de4
Replace raw mysql_query calls with the zmDb* functions
...
With this we can make sure we have proper locking of our DB connection at all times.
2021-03-06 00:12:18 +01:00
fa22129966
Make last_alarm_count last alarmed frame while only in ALARM state to make post_event_count counts since here not alone alarmed frames that don't shot alarms.
2021-03-04 20:20:02 +01:00
e67626b4e2
logger: Move log_mutex to std::recursive_mutex
2021-03-03 23:31:53 +01:00
20fe6153d5
Don't treat data packets as video
2021-03-03 15:52:39 -05:00
b87d859f72
Set the packet's stream_index to the packetqueue stream. Rename get_ functions to get
2021-03-03 12:06:34 -05:00
a01a24ec36
Add loading SecondPath in monitor
2021-03-03 09:56:33 -05:00
46ec4e75d4
Check codec type instead of stream_index to determine video/audio
2021-03-03 09:52:27 -05:00
4ff016c991
Make capturing/analysing log lines follow same pattern
2021-03-02 20:51:16 +01:00
be1b439dcc
Add State_Strings and code cleanup. Fix not going into alarm state when already recording. Fixes #3184
2021-03-02 14:42:54 -05:00
f35a1c70c0
fix build with old avcodec for xenial
2021-03-02 12:07:51 -05:00
c03d9b2987
Set state before we write packets to event so that the event knows that it is alarmed
2021-03-02 11:47:55 -05:00
71d65685b9
Can't clear image data early. Might be needed for snapshot and pre alarm farmes
2021-03-02 11:12:57 -05:00
46743ebaab
Silence compile warning
2021-03-02 10:00:48 -05:00
832eabbd79
Don't both updating analysis fps unless we are doing motion detection
2021-03-02 09:59:32 -05:00
1bc5abb9e9
Only include video packets in analysis_image_count
2021-03-01 17:07:09 -05:00
51c19912f8
Use analysis_image_count in opening new event log line
2021-03-01 16:56:47 -05:00
9302c9506e
Add audio_frequency and audio_channels to shared mem and set them in PrimeCapture
2021-03-01 16:49:27 -05:00
6e73c08a21
add fifo's for video and audio. Write the packet data to them. Update FifoStream->Fifo
2021-03-01 16:49:26 -05:00
6c6d6c51b0
Add RTSPSTreamName loading and write packet data to the video and audio fifos
2021-03-01 16:46:48 -05:00
33dbcc449a
Merge pull request #3181 from Carbenium/rgb-const
...
rgb: Convert some constant defines to constexpr
2021-03-01 09:40:39 -05:00
71d864d77b
Merge pull request #3182 from Carbenium/monitor-includes
...
monitor: Move system includes back to their original location
2021-03-01 09:40:08 -05:00
3b3ecb89b2
monitor: Move system includes back to their original location
...
41dc0212e0cf9406a1e8
2021-03-01 00:45:57 +01:00
76e6c468e8
rgb: Convert some constant defines to constexpr
...
Using defines interferes with fmt.
Also rename them according to the Google styleguide.
2021-03-01 00:38:21 +01:00
741e67e8cd
ALERT also mean warming up with alarm_frame_count value before returning to ALARM....
2021-02-28 22:42:29 +01:00
6a47780f60
Fix a warning reported by -Wextra
...
/home/peterke/DEV/zoneminder/src/zm_monitor.h: In member function ‘Monitor::TriggerState Monitor::GetTriggerState() const’:
/home/peterke/DEV/zoneminder/src/zm_monitor.h:499:76: warning: enumerated and non-enumerated type in conditional expression [-Wextra]
499 | TriggerState GetTriggerState() const { return (TriggerState)(trigger_data?trigger_data->trigger_state:TRIGGER_CANCEL); }
| ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2021-02-27 01:27:58 +01:00
403061a39c
Fix warnings reported by -Wmissing-field-initializers
2021-02-26 22:46:09 +01:00
Isaac Connor
Peter Keresztes Schmidt
Isaac Connor
SirLouen
Isaac Connor
Peter Keresztes Schmidt
Admin