2742485a61
Merge pull request #3157 from Carbenium/zmc-deadlock
...
Fix a possible deadlock on zmc shutdown and reconnect
2021-02-11 11:28:36 -05:00
42484e6434
zmc: Fix a deadlock on shutdown/reconnection
...
First stop the analysis threads, then close the monitors and thus drain the packet queues before trying to join the analysis threads since they might hang while waiting for the next packet to arrive.
2021-02-11 15:48:22 +01:00
cca4d18d26
need <algorithm> for std::max
2021-02-10 17:29:51 -05:00
51f2d120e4
Free raw image after motion detection when doing passthrough and not saving jpegs
2021-02-10 17:07:58 -05:00
393e8b582a
Move the logic of whether to queue a packet into packetqueue::queuePacket
2021-02-10 14:11:00 -05:00
0a1bd3537d
ready_count is now max(warmup_count,pre_event_count). This should ensure that we have enough packets in the packet queue when creating an event.
2021-02-10 13:54:20 -05:00
991e8dc860
Include mysqld_error.h so we can test for specific errors
2021-02-10 13:54:20 -05:00
64cfac9255
Only loop on SQL insert for wait timeout error, not others
2021-02-10 13:54:20 -05:00
2f5dff7244
Monitor: Don't push packets into the packet queue when in Monitor mode
...
There is no consumer for the packets in this mode, so don't queue them up. This saves quite a bit of RAM for mode of operation.
2021-02-10 16:13:47 +01:00
687ba03eb4
Drop relicts of zma
2021-02-10 13:26:25 +01:00
8f783c0ec4
Must also include cstdarg for va_start etc al
2021-02-09 23:32:27 -05:00
9879a40c4b
Must include cstring
2021-02-09 23:32:27 -05:00
b18522b6c0
Merge branch 'master' of github.com:ZoneMinder/zoneminder
2021-02-09 20:29:45 -05:00
fab7efa003
Fix PrimeCapture on local cams. We need to be able to call it for each monitor
2021-02-09 20:29:37 -05:00
dcf1ff3133
Merge pull request #3152 from Carbenium/ffmpeg-warnings
...
Fix some ffmpeg deprecation warnings
2021-02-09 20:15:41 -05:00
a66a9a6f10
Rtsp: Use AvStream.codecpar if available
...
.codec has been deprecated in libavf 57.33.100
2021-02-10 00:21:23 +01:00
e18f9e1f03
FFmpeg: Drop function which is not needed with supported ffmpeg versions
...
avformat_alloc_output_context2 was introduced in libavformat 53.2 (2011). Drop our own implementation which was used if the library version wasn't available. It isn't used anymore an causes compile warnings.
2021-02-10 00:21:23 +01:00
d0b80d63c3
FFmpeg: Fix a version check to avoid deprecation warnings on newer systems
2021-02-10 00:20:34 +01:00
0380bee130
AnalysisThread: Make the class un-movable
...
We depend on an unchanged value of "this" after the creation of the thread otherwise undefined values would be accessed within the std::thread.
2021-02-09 23:54:50 +01:00
8fa1249b33
Utils: Add some helper to create unique_ptrs
...
They follow the C++14 API and can be removed once the language level is increased.
2021-02-09 23:52:13 +01:00
67cd038a4f
Include pre-alarm frames in db
2021-02-09 15:33:09 -05:00
727594e3af
Fix rotated images by allocating image with camera dimensions
2021-02-09 14:53:14 -05:00
13d72bdec6
Merge branch 'master' of github.com:ZoneMinder/zoneminder
2021-02-09 14:24:20 -05:00
1780cfbff1
Add frames_duration
2021-02-09 14:23:34 -05:00
9b3d423f3d
Separate duration==endtime-starttime from Frames Duration
2021-02-09 14:22:23 -05:00
a5519075f5
Also save ALERT frames to db
2021-02-09 14:22:02 -05:00
c233bf3463
spacing and a fix for duplicated for loop setting up rtsp server
2021-02-09 13:18:34 -05:00
032420beb2
Don't need to init mVideoStream etc as they are done in Camera(). Set stream_index in packet.
2021-02-09 13:16:19 -05:00
05b5927f01
Don't queue audio packets if we aren't saving audio
2021-02-09 11:54:38 -05:00
1bce4f6bfa
When flushing queues, will return 0 when done. Handle it. Also set next dts from pkt, not opkt
2021-02-09 11:30:42 -05:00
e3eebeb9dd
Must return ret to handle case where ret=0.
2021-02-09 11:30:06 -05:00
aab3aed791
Merge pull request #3145 from Carbenium/analysis-thread
...
AnalysisThread: Move it over to std::thread
2021-02-09 09:26:47 -05:00
23a4b5087c
RTSPServerThread: Fix a crash during construction
...
It's a bad idea to use a shared_ptr instance from which the data just got moved away. Rename the instance variable to distinguish them.
2021-02-09 14:50:07 +01:00
4056782954
Comms: Move all classes to ZM:: namespace
...
The Socket class collides with a class named the same way from liblive555. This confuses the linker and links the wrong object leading to a crash when connecting to the RTSP server.
2021-02-09 14:45:33 +01:00
888ddc5d63
AnalysisThread: Sprinkle some more std::chrono
2021-02-09 12:26:53 +01:00
3ba8ff604f
AnalysisThread: Use std::this_thread::sleep_for instead of usleep
2021-02-09 12:26:53 +01:00
4cd70fec1a
Utils: Add some typedefs for std::chrono durations
2021-02-09 12:26:53 +01:00
b22dbd4788
AnalysisThread: Move it over to std::thread
2021-02-09 12:26:53 +01:00
00104b020c
Build: Link our libs and executable targets against zm-core-interface
2021-02-08 23:08:22 +01:00
4d0800151a
Merge pull request #3143 from Carbenium/close-event-crash
...
Monitor: Don't segfault in closeEvent if mmap is already unmapped
2021-02-08 15:32:38 -05:00
6fd6654488
Monitor: Don't segfault in closeEvent if mmap is already unmapped
2021-02-08 19:47:40 +01:00
7e7b1a0b1f
Logger: Try harder to obtain the DB lock
...
Since we are now multi-threaded it can happen quite easily that a log message should be written to the DB on one thread while the other thread executes another query. Don't bail out immediately in the logging code, instead try to obtain the lock within 1s.
2021-02-08 19:07:01 +01:00
70fbc25dbd
Mutex: Change method signatures so they resemble std::unique_lock a bit more
...
try_lock_for should specify in their return value whether obtaining the lock succeeded.
2021-02-08 18:59:25 +01:00
05a115e315
Merge pull request #3141 from Carbenium/recursive-mutex
...
RecursiveMutex: Use the pthread_mutex_t of the base class
2021-02-08 11:49:35 -05:00
40ddca14c6
RecursiveMutex: Use the pthread_mutex_t of the base class
...
Not doing so initializes a pthread_mutex_t with PTHREAD_MUTEX_RECURSIVE in the derived class but the lock/unlock
methods still use the pthread_mutex_t instance of the base class, which is not a recursive mutex.
2021-02-08 17:33:06 +01:00
583779438b
Don't unlock db_mutex if we don't get the lock in the first place
2021-02-08 11:09:44 -05:00
192aae8e30
small space and code doc
2021-02-08 09:04:06 -05:00
01e69569eb
Placement of -- matters.
2021-02-08 09:04:06 -05:00
b75d2f6164
Don't need to set ctx to null. fre_context does it for us
2021-02-08 09:04:06 -05:00
061140958c
Only update videodata if shared_data is active
2021-02-08 09:04:06 -05:00
57f599237c
Merge pull request #3136 from Carbenium/db-connect
...
DB: Make connection initialization more predictable and finalize mysql library correctly
2021-02-08 08:43:33 -05:00
3376b44290
Monitor: Fix a segfault when loading local cameras
2021-02-08 12:25:18 +01:00
f43507dce0
Use the power of smart pointers to manage Monitor instances
2021-02-07 21:20:45 +01:00
a3dc48b55d
Define printf format specifier for size_t types (SZFMTD)
2021-02-07 20:39:48 +01:00
cbb37337cb
DB: Improve resource cleanup on connection failure
2021-02-07 20:16:16 +01:00
e5f39e78c6
Merge pull request #3133 from Carbenium/dump-packet
...
ffmpeg: exit dumpPacket early if debug logging is not enabled
2021-02-07 10:40:58 -05:00
cc6ea04afe
Reformat touched code
2021-02-07 13:55:08 +01:00
3690da90ec
DB: Call mysql_library_end when closing the connection
...
With the previous commit double initialization of the mysql library is avoided which could have led to the segfaults.
2021-02-07 13:46:33 +01:00
aec4dbc6ff
DB: Make connection initialization more predictable and avoid double-initialization
...
Remove calls to zmDBConnect from various places to avoid possible side-effects/double initialization.
The function should be called once from the main thread of the daemon.
Also split config loading into 2 steps: static and DB config loading. Load the static config before zmDBConnect is called so it has a chance to succeed.
2021-02-07 13:44:41 +01:00
938676b129
ffmpeg: exit dumpPacket early if debug logging is not enabled
2021-02-07 11:58:17 +01:00
ace93e2422
fix event start packets getting deleted while writing because we don't have a lock on them.
2021-02-06 20:11:38 -05:00
010674b3dd
Fix use of local mem in return value reported by cppcheck
2021-02-06 20:11:38 -05:00
c28e1b09e5
Fix compile when using sysv shm
2021-02-06 20:11:38 -05:00
ab2e468322
Fix resource leak on failure to load font
2021-02-06 20:11:38 -05:00
87c3a862e2
remove our copies of min() and max(). Use std::min() and std::max()
2021-02-06 16:02:09 -05:00
0b138ee687
Merge pull request #3134 from Carbenium/sort
...
Image: Replace qsort with std::sort
2021-02-06 13:14:58 -05:00
9dc3f15eac
Image: Replace qsort with std::sort
...
std::sort has stricter complexity requirements than qsort and can be better optimized
by the compiler due to templating.
2021-02-06 15:41:56 +01:00
7f99635763
Fix xenial builds. Fixes #3130
2021-02-05 12:30:51 -05:00
885efc27ee
adjust pts/dts on flushed video packets. Improve code comments and debugging
2021-02-04 21:38:37 -05:00
2cdf017767
Fixi endlessly writing null frames to video on close when encoding audio to aac
2021-02-04 20:40:11 -05:00
9df4487eb7
Remove code to update the frames to match videostore. they are always in sync now
2021-02-04 20:39:48 -05:00
8f9637f21a
Merge pull request #3129 from Carbenium/cmake-reformat
...
Build: Reindent the CMakeLists
2021-02-04 17:20:34 -05:00
5ce9203d2c
add include <cstring>
2021-02-04 17:07:25 -05:00
6c9983155c
Build: Reindent the CMakeLists
...
Indent with 2 spaces
Also remove expressions form closing tags. They have been made optional a while ago since they make reading rather more difficult.
2021-02-04 22:00:56 +01:00
2ee097c5f2
Merge pull request #3128 from Carbenium/int-type-macros
...
Consolidate __STDC_FORMAT_MACROS and __STDC_CONSTANT_MACROS definition
2021-02-04 14:44:51 -05:00
da4b1fe3bc
Use global FFMPEGInit(). Removed compiler warning
2021-02-04 14:07:37 -05:00
dd527f0888
Consolidate __STDC_FORMAT_MACROS and __STDC_CONSTANT_MACROS definition
...
Move the definitions to zm_define.h and include the header at the appropriate locations.
These macros have not been adopted by the C++11 standard.
However glibc 2.17 (CentOS 7) still depends on them to provide the macros which are guarded by these defines.
2021-02-04 19:58:29 +01:00
c57c50fd4a
Merge pull request #3123 from Carbenium/catch2
...
[RFC] Add Catch2 as C++ test framework and some exemplary tests
2021-02-04 12:57:04 -05:00
bef4e4032f
Add Catch2 as C++ test framework
...
Use -DCMAKE_BUILD_TEST_SUITE=1 during CMake invocation to activate building the tests.
The 'tests' target builds the unit tests which can then be executed using the 'test' target.
We depend on the Catch2 version of the system.
Since development normally takes place on current OSs, this shouldn't pose a problem.
2021-02-04 18:53:54 +01:00
513739aeb5
Merge pull request #3127 from Carbenium/header-cleanup
...
Cleanup and reorganize includes
2021-02-04 12:52:04 -05:00
bf8b3fee2a
Merge pull request #3126 from Carbenium/cmake-man-pages
...
Build: Make building man pages optional (enabled by default)
2021-02-04 12:05:22 -05:00
eef0da8f19
Remove references to <csignal> from AnalysisThread
...
The removed block_set member was unused.
2021-02-04 18:02:08 +01:00
22372b5117
Replace #pragama once with include guards to be consistent
2021-02-04 18:02:08 +01:00
8869bfd903
Gut out zm.h since it is used only to store the self variable
2021-02-04 18:02:08 +01:00
0dbc39ee25
Cleanup and reorganize includes
...
With this commit a unified structure for includes is introduced.
The general rules:
* Only include what you need
* Include wherever possible in the cpp and forward-declare in the header
The includes are sorted in a local to global fashion. This means for the include order:
0. If cpp file: The corresponding h file and an empty line
1. Includes from the project sorted alphabetically
2. System/library includes sorted alphabetically
3. Conditional includes
2021-02-04 18:02:01 +01:00
046e352304
improvements to fps reporting. In analysis, we report based on image packets processed, but the fps value is calculated based on the count of images we did motion detection on. We no longer count audio packets in capture fps reporting.
2021-02-04 11:50:01 -05:00
ad9fd05955
When allocating mVideoStream, set mVideoStreamId as well
2021-02-04 10:28:17 -05:00
ac42aa2488
Setup mVideoStream and mVideoStreamId and set it in packet.
2021-02-04 10:27:56 -05:00
5a57efdfe2
Replace deprecated C header includes with the C++ ones.
2021-02-04 05:39:03 +01:00
c61e6a8c56
If there is an open event in disconnect close it. The idea is that by the time we get to the destructor we should be all shut down
2021-02-03 17:04:40 -05:00
6ac5472606
Add disconnecting to zmc to free up resources.
2021-02-03 16:58:03 -05:00
cb60b6c141
Fix bulk frame code and move it to event. Revert base score to 0. Fix cause of continuous events. Move GetState to .h
2021-02-03 16:57:44 -05:00
35470951ad
Move the bulk frame logic from monitor to event. Fix up the logic of when to store a db frame. Fix altering max_score too early
2021-02-03 16:56:34 -05:00
4db0dea1f2
Build: Make building man pages optional (enabled by default)
...
Add a new CMake option (-DBUILD_MAN) which can be used
to deactivate the man page build steps.
This is especially useful in a development situation where "make all"
is needlessly slowed down by these build steps.
2021-02-03 21:22:28 +01:00
be1db1ff20
Score should be a signed int
2021-02-03 09:08:06 -05:00
f868d92269
Fix colour shift in Crop function due to not multiplying x position by colours
2021-02-02 23:19:53 -05:00
49e9bf86fa
Code style
2021-02-02 23:19:53 -05:00
09d8dbb460
spacing
2021-02-02 23:19:53 -05:00
0958768ce5
Fix no bulk frames by setting score to -1 which means BULK. It will get changed to 0 or more by later code. Fixes #3121
2021-02-02 23:19:53 -05:00
7e469a28fa
remove redundant code, code style and remove some unnecessary multiplies
2021-02-02 23:19:53 -05:00
38368a8b9d
remove deprecated video_buffer_duration stuff. Fix loading monitor column order
2021-02-02 23:19:53 -05:00
e09c80e385
Have to close camera AFTER threads have stopped
2021-02-02 23:19:52 -05:00
61c3c0d565
Should increment_it after releasing the packet to prevent deadlock
2021-02-02 23:19:52 -05:00
8de260472d
improve the logic of clearing packets from queue. make get_event_start_it return a pointer to an it tracked by the packetqueue.
2021-02-02 23:19:52 -05:00
cb0008fb8c
Add rtsp_server and accessor
2021-02-02 23:19:52 -05:00
afa5e27d56
load RTSPServer column as well. start_it needs to be tracked by packetqueue. We no longer close the camera in Monitor::Close because we need to clear the packetqueue, then wait for threads to finish, THEN close camera. So that logic needs to move to zmc
2021-02-02 23:19:52 -05:00
0c5c720e4b
Remove includes of <stdint.h>
...
Instead of including the deprecated header <stdint.h>, zm_define.h should be used.
2021-02-02 21:37:26 +01:00
e09fa1bebf
Remove includes of <cinttypes>
...
Instead of including <cinttypes> directly, zm_define.h should be used
to get the typedef'ed types as well.
2021-02-02 21:37:26 +01:00
0f5df0c739
zm: Typedef C++11 int types to make them easier to use
...
In order to clearly state the intended length of an integer variable
all usages of other integer types (short int, int, long int, ...)
should be converted.
2021-02-02 21:37:26 +01:00
b71aa4bd97
Fix never allowing the queue to fill when pre_event_count=0
2021-02-01 16:01:30 -05:00
a5417cfe6c
NULL=>nullptr. Update analysis_fps earlier on startup
2021-02-01 16:01:09 -05:00
aa53260a32
Free packet counts and iterators in destructor. Fix mem leak in queuePacket. Introduce free_it method to release iterators
2021-02-01 10:25:48 -05:00
0676c7cfb4
Use packetqueue::free_it to release iterators
2021-02-01 10:24:58 -05:00
08a498ef6a
Convert packetqueue from a pointer to a packetqueue to a member packetqueue that is always available.
2021-01-31 21:31:33 -05:00
a0722b3782
stop thread
2021-01-31 21:31:33 -05:00
fdadacac6c
set packet.size and data because av_init_packet don't do that
2021-01-31 21:31:33 -05:00
dd57d05f40
Convert packetqueue from a pointer to a packetqueue to a member packetqueue that is always available. Add methods to set packetqueue parameters. Emptying the queue is now in packetqueue::clear()
2021-01-31 21:31:33 -05:00
49cf55c22c
Put close back before joins
2021-01-31 12:39:06 -05:00
e08060af3f
Free linked monitors
2021-01-31 11:57:43 -05:00
4bcefe0562
Add a 10 second wait to force alarm on. If the monitor doesn't notice it is likely not running, leaving an mmap behind
2021-01-31 11:44:58 -05:00
14c06cd2d4
Close monitor after terminating threads instead of before
2021-01-31 11:44:25 -05:00
e237719d6a
Delete frame queue on stop
2021-01-31 11:43:16 -05:00
b83becd856
spacing
2021-01-31 11:43:03 -05:00
0fb7cb935f
Fix skipping over the head packet when deleting packets.
2021-01-31 11:42:51 -05:00
e084780123
Remove no longer used pre_event buffer and event_delete_thread
2021-01-31 10:09:03 -05:00
00114d32bc
Minor code improvements ostly just being more specific about parenthesis
2021-01-30 20:35:10 -05:00
b47d2428da
Minor code, debugging improvements
2021-01-30 20:34:39 -05:00
5fc52ae6df
Handle iterator pointing to end
2021-01-30 20:34:09 -05:00
9ef9fe81fa
Don't log error when flushing queues
2021-01-30 14:05:19 -05:00
b93aab6a11
turn off hwtransfer direct to image. Too compliated for now with not enough benefit
2021-01-30 12:34:29 -05:00
ac88567ee2
fix
2021-01-29 17:32:22 -05:00
5581cdafb6
must increment iterators in the packetqueue lock
2021-01-29 17:30:39 -05:00
95d2b1518e
Don't treat send_frame null as errors. We are ni flushing mode
2021-01-29 17:07:58 -05:00
dbad734414
Just include zm_ffmpeg.h
2021-01-29 15:49:53 -05:00
b812e0d484
It is necessary to prefer the image in the packet to in_frame as it has been timestamped etc
2021-01-29 15:37:51 -05:00
292e1b4c9e
Set stream time_base to Q. Set PTS/DTS of packets to current time
2021-01-29 15:37:23 -05:00
fea2ea37e5
Cleanup unused first/start/last pts/dts
2021-01-29 14:04:50 -05:00
a7d05613b5
When using remote RTSP need to set videoStream parameters
2021-01-29 14:04:21 -05:00
5f7f066a4f
Better to alloc context with codec
2021-01-29 14:03:48 -05:00
63a6bdaac1
spacing
2021-01-29 09:53:48 -05:00
5a21ebe3ef
allow audio streams
2021-01-28 10:49:46 -05:00
8199116c15
Make error message more clear
2021-01-28 10:46:08 -05:00
ab65a65dfb
use camel case on video_stream and audio_stream
2021-01-28 10:45:53 -05:00
335c1b1404
populate mVideoStream and mAudioStream so we don't allocate new ones later
2021-01-28 10:45:39 -05:00
28d27cc30a
use camel case on video_stream and audio_stream
2021-01-28 10:45:19 -05:00
4bd813d980
Don't try to transfer image when there is no image available
2021-01-28 10:22:14 -05:00
f32e546b94
Remove unused members
2021-01-28 10:18:22 -05:00
acf909d4f3
Move setting codec parameters below the copy in case they get overwritten
2021-01-28 10:17:23 -05:00
2baa22dc85
Fix case when hwaccel not compiled in
2021-01-28 10:16:58 -05:00
7ff38a3a5c
Remove unused code from FFmpegCamera
2021-01-28 10:11:26 -05:00
d16a7b98eb
fix send_packet_receive_frame. Can't just resend the same packet until we get a frame!
2021-01-28 10:04:02 -05:00
1212830354
fix AVOCDEC version check
2021-01-28 09:08:51 -05:00
d64745a5da
Add debug in zm_send_packet_receive_frame
2021-01-28 09:08:33 -05:00
7923e0c279
fix min_section_length not being honoured
2021-01-27 18:13:16 -05:00
c4b80e61bc
code comments
2021-01-27 16:14:17 -05:00
ce53552dda
require audio_in_ctx as well as audio_in_stream
2021-01-27 16:14:07 -05:00
6271971912
Use get_videoStream in zm_camera
2021-01-27 16:13:43 -05:00
4ca9c9fe69
code cleanup
2021-01-27 16:13:03 -05:00
608afcbbd2
return bytes consumed by decode
2021-01-27 16:12:49 -05:00
4c933f82b8
All cameras will have an mFormatConext, CodecContext etc. Consolidate code in zm_camera. Fix remote rtsp decoding
2021-01-27 16:12:32 -05:00
666299d5fa
code style
2021-01-27 16:11:24 -05:00
fbe22d29ba
Don't crash if can't add any streams
2021-01-27 12:50:40 -05:00
518270a9ac
Must set keyframe and codec_type of zm_packet
2021-01-27 12:50:17 -05:00
1ca93c4211
accept packets with image as video
2021-01-27 12:49:54 -05:00
6df865cd08
spacing
2021-01-27 12:49:37 -05:00
d741f4ba04
accept packets with image data
2021-01-27 12:49:27 -05:00
e28c724742
fix return values of Prime, Pre and PostCapture
2021-01-27 12:07:35 -05:00
be893fe9e4
Since we loop in here, need to lock the packetqueue
2021-01-27 11:48:32 -05:00
bbba0f679b
Don't need to set timebase. Continue supporting old ffmpeg
2021-01-27 11:48:32 -05:00
f3ea237af1
Fix build without RTSP
2021-01-27 10:50:07 -05:00
ef3440e5b8
Fix including rtsp server code
2021-01-27 10:08:42 -05:00
905912a8dd
Don't need to checkInitialized in event stream. We don't assign a monitor and don't need to connect to it
2021-01-27 10:07:57 -05:00
d594fbcd49
Some fixes for unused code (will be used in future)
2021-01-26 18:29:34 -05:00
27011ab49b
Fix bulid without liveMedia
2021-01-26 18:29:02 -05:00
42abe5c917
include hwcontext in zm_ffmpeg.h so that it gets included where needed
2021-01-26 18:28:11 -05:00
4dcce4ac95
Merge branch 'rtsp_server'
2021-01-26 14:22:10 -05:00
bfaed28cff
use config.min_rtsp_port to determine if we start up the rtsp server. Move the sleep on failure to capture down below shutting everything down.
2021-01-26 14:20:03 -05:00
33f934b9ab
Use config.min_rtsp_port instead of hard coded base port
2021-01-26 14:14:29 -05:00
4159baac06
Use 10 seconds of queue instead of a fixed packet count. Audio generates more frames than video so they get way out of sync.
2021-01-26 14:14:05 -05:00
7e11d28031
Remove duplicated debug
2021-01-26 12:25:11 -05:00
a209d493ef
Handle null video_in_ctx. Better debug. Always flush codecs
2021-01-26 12:24:43 -05:00
e73e6aaabc
check for terminating before locking packetqueue. Handle when pre_event_count==0
2021-01-26 12:23:44 -05:00
e4831909d6
get_packet can return null if we are terminating
2021-01-26 12:22:26 -05:00
7cc21b0d0b
Always load AvFrame to RGBA
2021-01-26 12:22:07 -05:00
e226618300
better debug of video/audio frames
2021-01-26 12:21:51 -05:00
cd9b3fb1f6
add static Mode_Strings
2021-01-26 12:21:21 -05:00
0ecbe29ac0
Handle no frame/duration information more gracefully
2021-01-26 12:20:55 -05:00
e10d15fa91
Only write db entries for video frames but do write them even if no decoded image
2021-01-26 12:20:32 -05:00
f731a5dc8f
Add StreamMode_Strings for printing out mode
2021-01-26 09:50:41 -05:00
835cc8076e
Cleanup constructor, using initializers. Pass in CodecContexts as well. We need them for timebases. Fixes passthrough timestamps.
2021-01-25 18:50:35 -05:00
6394c620ad
add stream index to debug
2021-01-25 13:23:57 -05:00
a0df09dcaa
Have to check for lock on video keyframe as well
2021-01-25 12:07:56 -05:00
baf39b0d4f
add adts_source
2021-01-24 20:16:54 -05:00
8a1686076a
break long line
2021-01-22 20:24:29 -05:00
7feb252f81
code style
2021-01-22 20:24:12 -05:00
9d2598da13
cleanup and add AAC support. Also stop source threads
2021-01-22 20:23:30 -05:00
afc7c86eac
add AAC support
2021-01-22 20:22:50 -05:00
2561a07d86
provide a simple SDP line
2021-01-22 20:21:28 -05:00
d03e5fbe20
cleanup
2021-01-22 19:29:19 -05:00
71ebae27eb
Use codecpar instead of codec which is deprecated
2021-01-22 19:29:01 -05:00
c7b8d7bda9
get rid of useThread. We will always have a thread
2021-01-22 19:26:00 -05:00
afd57ec307
Add a base extractFrame that just treats the entire buffer as a frame
2021-01-22 19:25:38 -05:00
c94e2c0f13
cleanup
2021-01-22 19:24:27 -05:00
08165c06df
Add audio details to zm_dump_codecpar
2021-01-22 19:24:15 -05:00
1a400be11c
add zm_rtsp_server_adts_source.cpp to build
2021-01-22 19:23:36 -05:00
ea8f264724
Merge branch 'release-1.34'
2021-01-22 15:54:06 -05:00
c21e02e3c7
Fixed issue where mysql_free_result can get called twice when a vaild username with an incorrect password is used.
2021-01-22 12:23:38 -05:00
f9fc10b394
When not capturing don't try to create mmap. Fixes #3112
2021-01-22 12:23:13 -05:00
f1686cfe9a
When not capturing don't try to create mmap. Fixes #3112
2021-01-22 12:11:43 -05:00
01ec57f902
remove test for negative pts. Negative pts is ok. Have been running this in master for a while with no negative effects.
2021-01-22 12:07:47 -05:00
a30a473981
fix passing in audiostream
2021-01-21 10:27:15 -05:00
b8eac366b7
pts is an int
2021-01-21 10:27:02 -05:00
d0380fb89b
cleanup, start roughing in audio stream support
2021-01-21 10:26:46 -05:00
44245a9a4f
spacing typos
2021-01-21 10:25:26 -05:00
8a9111d0b3
spacing
2021-01-21 10:25:09 -05:00
35c72b32dd
Cleanup. Remove stats stuff. Code now works so remove other options. Re-implement extractFrame as it was broken. It would skip shortmarkers.
2021-01-21 10:23:30 -05:00
66c78e5a9b
Merge branch 'zma_to_thread' into rtsp_server
2021-01-19 13:43:25 -05:00
ef006ca407
Fixed issue where mysql_free_result can get called twice when a vaild username with an incorrect password is used.
2021-01-19 14:47:11 +00:00
b1b72ec85b
Improve debugging. Add parenthesis to fix test for end. I think the * dereference is not being applied at the right time.
2021-01-19 09:46:08 -05:00
256080abb1
Fix crash of Reload() due to Load() clearing shared_data and mem_ptr. Load() shouldn't do these kinds of initialisations.
2021-01-19 09:44:53 -05:00
fec3dc763f
Cleanups. Apply crf to encoding to fix encoding video
2021-01-15 17:02:26 -05:00
430d64ba67
create fix_deprecated_pix_fmt function to adjust deprecated pixfmts
2021-01-15 17:01:59 -05:00
0f7c46e2cc
Merge branch 'master' into zma_to_thread
2021-01-15 14:56:00 -05:00
0f276887ad
When can't connect to monitor send an image saying so
2021-01-15 14:43:44 -05:00
0a0c99ce7a
fix double free of mysql result
2021-01-15 14:43:31 -05:00
23305be8bf
break lone lines. Move sendTextFrame to public so that we can use it to send error message in image form.
2021-01-15 14:43:07 -05:00
3d234427e0
initialize packetqueue, analysis_it, storage and videostore in Monitor constructor initializer. Only delete packetqeuue if it has been created.
2021-01-15 14:42:30 -05:00
68b0f7e1b5
initialize packetqueue, analysis_it, storage and videostore in Monitor constructor initializer. Only delete packetqeuue if it has been created.
2021-01-15 14:42:26 -05:00
27e10c2ed9
cleanup encoding code. Update logging
2021-01-15 11:55:46 -05:00
10e56df53c
analysis_limit > cpature fps: only log a warning if we have actually been capturing for a while. If doing passthrough, need to start continuous event from last keyframe
2021-01-15 11:54:36 -05:00
83c60b7317
Make the error message clearer by actually printing the time.
2021-01-15 11:53:25 -05:00
6845c2cab4
Fix padding issue in timestamp code
2021-01-15 11:46:30 +05:30
e530a51af7
WHen ret=0 is not failure, not success. Don't log error. Return the return code instead of -1
2021-01-14 10:31:55 -05:00
f44f920bf2
spacing
2021-01-14 10:31:29 -05:00
ef2f126eaa
Merge branch 'master' into zma_to_thread
2021-01-12 14:37:25 -05:00
e496679efd
Set transaction isolation level to READ COMMITTED so that concurrent event inserts don't deadlock
2021-01-12 14:19:04 -05:00
3423d8ed05
Only delete packets up to the next video keyframe. Don't be too aggressive
2021-01-12 14:13:12 -05:00
5b7fc210fe
Only use direct to rgb0 when image colours are 4
2021-01-12 14:12:09 -05:00
164a0f5a44
Need to use get_packet so that packets getting written to event are locked. Because queuePacket might delete them.
2021-01-12 14:11:47 -05:00
04c02dd1ef
Spacing
2021-01-12 14:11:06 -05:00
e706b4ba33
Hitting beginning of queue can happen on stream startup. So in that case make it a debug. Once the stream has been going for a while there should always be enough packets in the queue so make it a warning
2021-01-11 17:18:14 -05:00
605319a290
Remove old LOG line
2021-01-11 13:46:50 -05:00
b2c5860062
dumpPacket when addPacket
2021-01-11 13:46:50 -05:00
649114ed39
further disable rtsp_server
2021-01-11 13:46:50 -05:00
f7be54fe11
Add detecting target pixfmt and if rgb0 is supported, use it to do the transfer direct to the Image.
2021-01-11 13:46:50 -05:00
e8d06f702c
Handle signal loss, improve debugging
2021-01-11 13:46:50 -05:00
f3c4bb0027
Add AVBufferRef setup when Populating AVFrame from Image. This allows hwtranfer to work because it relies on AVBuffer AVFrame. Please note that we don't want AVBuffer to free the buffer so we pass an empty function to it.
2021-01-11 13:46:50 -05:00
9fb8e51ff2
Set imagePixFormat everywhere. Add PopulateFrame which creates and AVFrame pointing to the image's buffer. Will do this with proper refcounting eventually
2021-01-11 13:46:50 -05:00
9740b635dd
Fix missing comma
2021-01-11 13:46:50 -05:00
67f4359242
clean up code giving warning when no starttime is given
2021-01-11 13:46:50 -05:00
9cad82e916
include kleyframe status in zm_dump_video_frame
2021-01-11 13:46:50 -05:00
1ec2198d2b
remove unused var temp
2021-01-11 13:46:50 -05:00
fdf9975deb
break long line
2021-01-11 13:46:50 -05:00
c958a2c00b
Code style
2021-01-11 13:46:50 -05:00
46a8bb22fb
get camera if we havn't already. Don't delete the timestamp in shared zmpackets because it is just a pointer to shmem. Set it to null instead so that ~ZMpacket doesn't try to free it
2021-01-11 13:46:50 -05:00
b6b92115d1
allocate our own CodecContext for decoding. Reusing the existing one doesn't work for hwaccel. Add hwaccel flags to let it use Constrained Baseline for Baseline profile streams. Try without specified device if hwdevice_ctx_create fails.
2021-01-11 13:46:50 -05:00
497b91f7c6
disable rtsp_server
2021-01-11 13:46:50 -05:00
ebe3a9b6a7
Must notify before waiting in destructor. Fix leaks
2021-01-11 13:46:50 -05:00
09264a52ff
use zm_av_send_packet_receive_frame and fixup hwaccel support
2021-01-11 13:46:50 -05:00
13d7e612e3
improve hwaccel support
2021-01-11 13:46:50 -05:00
34009ca59b
remove unused directbuffer
2021-01-11 13:46:50 -05:00
97dff2fb28
Open/CLose RTSP with analysis thread when opening and closing monitor. We have to have successfully PrimeCapture before adding streams to RTSP Server and need to shut it down when closing the monitor because the packetqueue goes away
2021-01-11 13:46:50 -05:00
1316c6ea86
Update codec opening to properly handle passthrough
2021-01-11 13:46:50 -05:00
894ad11816
change outputFd which is unused to stream_id which is the stream_id to concern ourselves with when getting packets from the packetqueue. Add more tests for zm_terminate. Add testing for AV_CODEC_ID instead of v4l2 PIX_FMT to determine stream type
2021-01-11 13:46:50 -05:00
514e0d2e93
remove analysis_it and correctly manage external iterators. Fix testing for ability to remove packets from packetqueue. Fix some cases where the order of testing zm_terminate and packet locking is important
2021-01-11 13:46:50 -05:00
9187b08b7a
add missing and mix order of Packet initializers
2021-01-11 13:46:50 -05:00
b3ca0ac2d9
add missing and mix order of Packet initializers
2021-01-11 13:46:50 -05:00
65fc5bf478
move code from Load for purpose==ANALYSIS because it will never run. Analysis is a thread now and must assume that PrimeCapture has already succeeded.
2021-01-11 13:46:50 -05:00
824cbb7879
spacing and NULL=>nullptr
2021-01-11 13:46:50 -05:00
f842e9e2ed
NULL=>nullptr
2021-01-11 13:46:50 -05:00
02f65cec4d
Don't need to get_ref_image anymore. It will block waiting for a capture packet and the ref image will be set by capture thread
2021-01-11 13:46:50 -05:00
432bb338e8
Rename H264PASSTHROUGH to just PASSTHROUGH. Add an analysis_it to the Monitor object as it will no longer exist in the packetqueue
2021-01-11 13:46:50 -05:00
da7a50c92d
Rename H264PASSTHROUGH to just PASSTHROUGH. Start with last_signal set to true so that we don't have a signal change event on startup. Use new generic packetqueue functions
2021-01-11 13:46:50 -05:00
22ae83a0d6
Rename H264PASSTHROUGH to just PASSTHROUGH
2021-01-11 13:46:50 -05:00
705959d1ec
Set codec_type in zm_packet
2021-01-11 13:46:50 -05:00
510cbd8b19
Add AVPacket parsing queue and other files for rtsp_server
2021-01-11 13:46:50 -05:00
3f5bc97e6e
continue roughing in rtsp server. Fix not adding session to rtspServer.
2021-01-11 13:46:50 -05:00
92ac012324
Add rtsp_server files to CMakeLists.txt
2021-01-11 13:46:50 -05:00
60fa3f9ec1
cleanup. Add h264_vaapi codec support
2021-01-11 13:46:50 -05:00
0cc123a460
small cleanup in logging
2021-01-11 13:46:50 -05:00
fe7007cc2b
Remove old LOG line
2021-01-11 13:45:37 -05:00
62ffc20c98
dumpPacket when addPacket
2021-01-11 13:45:21 -05:00
2fe325efe7
further disable rtsp_server
2021-01-11 13:38:22 -05:00
1b1438bf7a
Add detecting target pixfmt and if rgb0 is supported, use it to do the transfer direct to the Image.
2021-01-11 13:36:51 -05:00
e1f6f5984d
Handle signal loss, improve debugging
2021-01-11 13:35:48 -05:00
70090f7edc
Add AVBufferRef setup when Populating AVFrame from Image. This allows hwtranfer to work because it relies on AVBuffer AVFrame. Please note that we don't want AVBuffer to free the buffer so we pass an empty function to it.
2021-01-11 13:35:23 -05:00
f625734c82
Set imagePixFormat everywhere. Add PopulateFrame which creates and AVFrame pointing to the image's buffer. Will do this with proper refcounting eventually
2021-01-11 11:57:34 -05:00
29255d1528
Fix missing comma
2021-01-11 11:15:22 -05:00
ab9583cbdf
clean up code giving warning when no starttime is given
2021-01-11 10:06:54 -05:00
dd4685ecf2
include kleyframe status in zm_dump_video_frame
2021-01-10 19:13:02 -05:00
4b90eb992d
remove unused var temp
2021-01-08 16:45:16 -05:00
9e353a8837
break long line
2021-01-08 16:45:03 -05:00
c0a2286dee
Code style
2021-01-08 15:49:21 -05:00
a6aefcf477
get camera if we havn't already. Don't delete the timestamp in shared zmpackets because it is just a pointer to shmem. Set it to null instead so that ~ZMpacket doesn't try to free it
2021-01-08 15:49:09 -05:00
736b14327e
allocate our own CodecContext for decoding. Reusing the existing one doesn't work for hwaccel. Add hwaccel flags to let it use Constrained Baseline for Baseline profile streams. Try without specified device if hwdevice_ctx_create fails.
2021-01-08 15:48:01 -05:00
81d6f8c1ee
disable rtsp_server
2021-01-07 15:13:02 -05:00
c70e2ccfc2
Must notify before waiting in destructor. Fix leaks
2021-01-07 15:12:44 -05:00
514201c7b2
use zm_av_send_packet_receive_frame and fixup hwaccel support
2021-01-07 15:12:27 -05:00
f729034e9f
improve hwaccel support
2021-01-07 15:11:46 -05:00
655e54db17
remove unused directbuffer
2021-01-07 09:50:45 -05:00
595bb2f565
Open/CLose RTSP with analysis thread when opening and closing monitor. We have to have successfully PrimeCapture before adding streams to RTSP Server and need to shut it down when closing the monitor because the packetqueue goes away
2021-01-07 09:47:53 -05:00
c6d15f193a
Update codec opening to properly handle passthrough
2021-01-07 09:46:35 -05:00
5cca440bee
change outputFd which is unused to stream_id which is the stream_id to concern ourselves with when getting packets from the packetqueue. Add more tests for zm_terminate. Add testing for AV_CODEC_ID instead of v4l2 PIX_FMT to determine stream type
2021-01-07 09:46:06 -05:00
abc402878b
remove analysis_it and correctly manage external iterators. Fix testing for ability to remove packets from packetqueue. Fix some cases where the order of testing zm_terminate and packet locking is important
2021-01-07 09:43:53 -05:00
3b8266a6f0
add missing and mix order of Packet initializers
2021-01-07 09:41:08 -05:00
0d450f4f85
add missing and mix order of Packet initializers
2021-01-07 09:41:02 -05:00
ff3bc981de
move code from Load for purpose==ANALYSIS because it will never run. Analysis is a thread now and must assume that PrimeCapture has already succeeded.
2021-01-07 09:40:24 -05:00
7afaf00202
spacing and NULL=>nullptr
2021-01-07 09:36:54 -05:00
e30f0245ef
NULL=>nullptr
2021-01-07 09:36:33 -05:00
c9641063ca
Don't need to get_ref_image anymore. It will block waiting for a capture packet and the ref image will be set by capture thread
2021-01-07 09:36:18 -05:00
315dccdaec
Rename H264PASSTHROUGH to just PASSTHROUGH. Add an analysis_it to the Monitor object as it will no longer exist in the packetqueue
2021-01-06 11:32:09 -05:00
e93a895f28
Rename H264PASSTHROUGH to just PASSTHROUGH. Start with last_signal set to true so that we don't have a signal change event on startup. Use new generic packetqueue functions
2021-01-06 11:31:31 -05:00
d6c217c1ec
Rename H264PASSTHROUGH to just PASSTHROUGH
2021-01-06 11:30:42 -05:00
08a28e6960
Set codec_type in zm_packet
2021-01-06 11:30:03 -05:00
7c049afc61
Add AVPacket parsing queue and other files for rtsp_server
2021-01-06 11:26:08 -05:00
770cf5703d
continue roughing in rtsp server. Fix not adding session to rtspServer.
2021-01-06 11:24:52 -05:00
d6b59c0abf
Add rtsp_server files to CMakeLists.txt
2021-01-06 10:48:52 -05:00
b6c11538c2
cleanup. Add h264_vaapi codec support
2020-12-31 09:15:49 -05:00
48dcb23af0
small cleanup in logging
2020-12-31 09:14:03 -05:00
6d036629d3
clean up cruft. NULL=>nullptr. Fix some codec_context allocation. Try to solve h264_encoder_close crash.
2020-12-30 21:25:12 -05:00
9d532df9c7
need to include zm_video for Encoder Parameter passing
2020-12-30 21:24:09 -05:00
f61210c91f
remove old code using image_buffer in zm_packets
2020-12-30 21:23:29 -05:00
6c696f4025
Return avcodec errors codes instead of 0/1
2020-12-30 21:22:55 -05:00
64deff7486
include std::string don't include zm_video.h. Remove old videoWriter references
2020-12-30 21:22:33 -05:00
00aae0b68f
Use proper c++ initializers
2020-12-30 21:21:59 -05:00
019f02e9de
remove old sigblocking code
2020-12-30 21:21:41 -05:00
284b9f963f
Merge branch 'master' into zma_to_thread
2020-12-29 12:18:26 -05:00
dc487f35a9
set packet codec_type
2020-12-27 12:36:33 -05:00
9be7547c8b
Look at stream index instead of image_index when finding first keyframe in packetqueue
2020-12-27 12:32:46 -05:00
e58c06e60f
Don't need keyframes when saving jpegs.
2020-12-27 12:32:06 -05:00
af94473eb1
remove debug lines about nalType=1
2020-12-27 12:25:23 -05:00
085d83b250
frames are allocated in zm_packet now, so remove them
2020-12-27 12:24:34 -05:00
c8d2eb9c0f
Must stop threads before Closing monitor
2020-12-27 12:04:35 -05:00
a440ab3ef0
need to copy parameters to codecpar
2020-12-27 12:04:17 -05:00
16662f79ce
spacing and code stylez
2020-12-27 12:03:44 -05:00
57542b01d5
Remove all the scaling and conversion stuff. Use packet->decode. Set keyframe flag. return codes of functions are now -1 for failure, 0 for failure but no error and 1 for success.
2020-12-27 12:02:02 -05:00
7c9db96acc
spacing and NULL=>nullptr
2020-12-27 12:01:01 -05:00
3f2d088f8c
Delete image if image_index == -1
2020-12-27 12:00:45 -05:00
197f9bdd9e
indenting fix. Don't update reference image if not doing motion detection. Decouple the image buffer from the packetqueue. So always allocate a new image. Then copy decoded image to image buffer if required.
2020-12-27 12:00:18 -05:00
63687c8e44
code style
2020-12-27 11:57:50 -05:00
61bffdb249
fix compiler warning
2020-12-27 11:57:23 -05:00
5624a0bef4
NULL->nullptr
2020-12-27 11:56:59 -05:00
d6bbc9bbbb
Set codec_type in ffmpeg_camera instead of in monitor
2020-12-27 11:56:44 -05:00
0521d05295
Can only output jpegs if we are doing decoding.
2020-12-27 11:55:53 -05:00
9b916a15a2
Only get ref image if we are doing motion detection.
2020-12-27 11:55:14 -05:00
ddf66bc9b5
Merge pull request #3100 from vertigeaux/share_frame_scores
...
save frame scores to SharedData for use with linked monitors
2020-12-24 11:08:25 -05:00
48d9b4d5a5
Remove unused variables
2020-12-23 18:50:52 -05:00
f934a6bbaf
spacing and change last_fps_time and last_analysis_time to doubles
2020-12-23 18:50:38 -05:00
1ffc233593
Move some initialisation into MOnitor() initialisation. Update UpdateAnalysisFPS to use more doubles instead of integers to get better numbers. Move capture FPS updating to UpdateCaptureFPS and use doubles there too. remove some dead code and add some debugging
2020-12-23 18:50:07 -05:00
3893e97e94
Quieten compiler warnings
2020-12-23 18:18:30 -05:00
ee8f940acf
Add some debug
2020-12-23 18:18:16 -05:00
fb2793d337
use nullptr instead of 0 when init'ing event
2020-12-23 09:11:33 -05:00
a1917d83d0
Merge branch 'master' into zma_to_thread
2020-12-22 19:52:09 -05:00
1416cbb03c
save frame scores to SharedData for use with linked monitors
2020-12-22 17:44:53 -06:00
d6486d1a7e
use nullptr instead of 0 when init'ing event
2020-12-22 15:44:07 -05:00
400e0de609
When updating Monitor_Status, reset FPS on Prime
2020-12-22 10:22:52 -05:00
4bea286cfe
Use new get_event_start_packet_it function to start the new event with the right packet.
2020-12-22 10:22:28 -05:00
91057b9546
Clean up video_packet_count stuff. use packet_counts instead. Use more efficient logic for managing the # of video packets on the queue. Rewrite clearQueue to not use reverse iterators. Implement get_starting_packet to return an iterator to the packet that SHOULD start an event. So it takes into account pre_event_count and keyframe rules.
2020-12-22 10:20:44 -05:00
d89cbebbdf
AddPacket should just take a packet. score and alarm_image are members of the packet
2020-12-22 10:18:15 -05:00
bc03afa166
Merge branch 'rtsp_server' into zma_to_thread
2020-12-17 10:21:51 -05:00
8d52baeee2
Merge branch 'master' into rtsp_server
...
Cleanup Analysis a bit. We can't skip packets just because they are audio. Clean up the state machine transitions a bit to make them a little more readable.
Change logic of PrimeCapture, success MUST return 1. 0 means no error but also no success.
Debugging and braces improvements in local_camera.
2020-12-17 10:16:54 -05:00
08d82fb86a
use nullptr instead of 0 when init'ing event
2020-12-15 18:25:17 -05:00
6e2cfa6ca9
Add R and W short form options
2020-12-15 16:57:27 -05:00
b306f1b2e8
Add R and W short form options
2020-12-15 16:55:28 -05:00
89eacbc8a8
NODECT needs an analysis thread to check for triggers and linked monitors. Turn off RTSP for now
2020-12-15 16:55:12 -05:00
fbbfb20c41
Move orientation setting down. output_stream hasn't been allocated yet so that would crash.
2020-12-15 16:54:35 -05:00
b7cc5dde54
Merge branch 'master' of github.com:ZoneMinder/zoneminder
2020-12-15 16:50:09 -05:00
46bbbb7dff
Merge branch 'fix_zone_instead_of_ignore'
2020-12-15 16:33:58 -05:00
e9d3449929
Allow altering polygon coordinates
2020-12-15 16:32:41 -05:00
a88ccf793b
correct zone points instead of skipping zone
2020-12-15 16:32:19 -05:00
5dbe8d35ad
Debug the start of rtsp server thread run
2020-12-15 16:01:34 -05:00
a502a86b00
Instead of pointing analsysis_it to begin, point it to the end, which is the newly pushed packet. Add back queue clearing
2020-12-15 16:01:18 -05:00
da18305729
Remove some dead code and debugging
2020-12-15 15:59:46 -05:00
39212d8ca0
Remove or increase debug level
2020-12-15 15:59:22 -05:00
8a2d4c7512
Debug the start of thread run in analysisthread. Sleep for appropriate amount of time.
2020-12-15 15:57:40 -05:00
aaea6c6ead
Store endtime for each packet
2020-12-15 15:57:01 -05:00
0702b64cc4
Merge branch 'master' into zma_to_thread
2020-12-15 10:51:40 -05:00
99e7ae3505
Merge branch 'master' into rtsp_server
2020-12-15 10:14:19 -05:00
f544c18541
add debug testing
2020-12-12 18:53:12 -05:00
97b0ea2b73
Add missing columns to sql to load monitors. Add code to do DecodeEnabled. Handle audio packets
2020-12-12 18:52:57 -05:00
f77292e6cc
Move the decoding_enabled logic to constructor to save a few cycles
2020-12-10 16:23:08 -05:00
7b1ca0e66d
Use the new DecodingEnabled function
2020-12-10 14:05:57 -05:00
7f72d5399f
add decoding_enabled and DecodingEnabled function
2020-12-10 14:05:46 -05:00
c65e63798d
Don't do decode when in RECORD OR NODECT and passthrough and no jpegs
2020-12-10 13:47:30 -05:00
c9bd09ae7b
report both capture_fps and analysis_fps
2020-12-09 15:03:18 -05:00
9d43b64d4a
Add debug and rtsp_server
2020-12-09 15:03:00 -05:00
03903d2dad
spacing
2020-12-09 15:01:35 -05:00
f54b8fff44
use mutex and condition_variable to manage signalling. Lots of debugging and fixes
2020-12-09 15:01:24 -05:00
02dd1d4cc5
Use recursive_mutex for mutex because we need to hold the lock twice
2020-12-09 15:00:57 -05:00
50e1e4391a
Include capture_fps and analysis_fps in status
2020-12-09 15:00:29 -05:00
6bf5d1b5a1
Fixes to analysis_fps vs analysis_fps_limit. Fixes to logic in analysis. Make capture_fps and analysis_fps be part of shared mem.
2020-12-09 15:00:11 -05:00
282c020d86
spacing code style
2020-12-09 12:21:41 -05:00
697f9a50fe
Terminate thread also when zm_terminate is true
2020-12-09 12:21:31 -05:00
a3ff81b279
Add zm_rtsp_server_thread.cpp to CMakeLists.txt
2020-12-09 12:20:01 -05:00
054e1b583d
Rough in code for the RTSP Server thread
2020-12-09 12:19:35 -05:00
b261fbb397
Merge branch 'master' into zma_to_thread
2020-12-07 16:26:26 -05:00
aaf4b37439
spacing, don't need to set packet.size=0
2020-12-07 15:53:09 -05:00
36b5702c50
Increase LinkedMonitor debugging. Fix LinkedMonitors. Fixes #3091
2020-12-05 19:36:44 -05:00
4d33667a85
Merge branch 'release-1.34'
2020-12-05 16:51:42 -05:00
8012438573
Fix font rendering issue
2020-12-04 05:22:54 +05:30
b2e5df1854
Need to -1 to size parameter when calling SetFontSize
2020-12-03 18:31:41 -05:00
1bbcf4ea31
spacing and make assignments a little more readable/efficient maybe
2020-12-03 16:43:27 -05:00
330327ded0
Improve code readability. Use a define for header size
2020-12-03 16:21:18 -05:00
cfd4c17953
Include invalid font path in the error message
2020-12-03 13:35:12 -05:00
c8aac87f74
Merge branch 'master' of github.com:ZoneMinder/zoneminder
2020-12-03 10:26:27 -05:00
d8993931da
Improve group permissions (mode 660)
...
Make /dev/shm files 660.
2020-12-02 21:27:00 +01:00
59d5860560
Merge branch 'Font' of https://github.com/hax0kartik/zoneminder into Font
2020-12-02 09:45:16 +05:30
1ec13f3d06
Free font->data only when font itself is valid
2020-12-02 09:44:49 +05:30
ff2981b9b3
code style. Remove unused members. Make WriteFrameImage const
2020-12-01 09:53:51 -05:00
836cd2d58d
Merge branch 'Font' of https://github.com/hax0kartik/zoneminder into font
2020-11-30 09:45:39 -05:00
d290ffc1b3
Set individual rgb components instead of memset which is wrong
2020-11-30 17:57:59 +05:30
159edbfce9
Fix video file having wrong id
2020-11-29 16:25:33 -05:00
32e2563643
Free font data when destructor is called
2020-11-29 10:53:20 +05:30
890a52605f
Satisfy cpplint
2020-11-29 10:25:06 +05:30
bbeb599fce
Remove bigfont
2020-11-28 20:28:34 +05:30
b212b0e450
Allow modifying font file location
2020-11-28 20:18:17 +05:30
0a7b7b9661
Bound check values
2020-11-28 19:44:45 +05:30
528699f942
Use ctzll + new font format for improving drawing speed
2020-11-28 18:46:20 +05:30
3a943d6f09
Add ServerId method, code style
2020-11-27 13:29:05 -05:00
95cbc053fc
Try other storage areas if we fail to create event dir on the assigned area.
2020-11-27 13:28:38 -05:00
a6245d9e90
Minor code style update
2020-11-27 13:27:51 -05:00
d6345d32fd
Reduce error level of warnings about monitors having Function==NONE
2020-11-25 09:53:06 -05:00
e0a30ab5e0
Only log an error if we haven't been given sigpipe.
2020-11-22 17:28:53 -05:00
660636c0e2
loop if we get egain when flocking. Warn when format not specified.
2020-11-22 16:54:42 -05:00
4d8f45d284
There is no need to copy query. We do not modify it.
2020-11-21 16:59:21 -05:00
1b472edc2b
fix cast
2020-11-21 16:58:22 -05:00
6da673dd69
remove unused includes
2020-11-21 09:25:36 -05:00
5f4fb4200f
googe code style
2020-11-21 09:25:10 -05:00
2cdf0da3c0
Remove unused includes and apply google code style
2020-11-21 09:15:36 -05:00
7653a058a3
More correct code for setting source
2020-11-20 16:31:40 -05:00
e1a0c4f973
Don't log a warning of comms not open if no connkey
2020-11-20 16:31:12 -05:00
65d4c43cc2
Use BOUNDARY instead of ZoneMinderFrame. If we get EAGAIN when flocking, try again.
2020-11-20 16:29:10 -05:00
4f178e47bc
Break early after setting zm_terminate so that zms quits faster. Use a basic assignment instead of memcpy for last_frame_timestamp
2020-11-19 16:39:53 -05:00
03f033cf36
cleanup MOnitor destructor. Most of the freeing is done in disconnect now. Fixes zms crash
2020-11-19 16:39:14 -05:00
3f1e7e793f
update buffertype after DumpBUffer
2020-11-19 16:38:49 -05:00
58ccea6aa8
use better c++ class initialisation. Use ZM_BUFTYPE_DONTFREE instead of 0 for init buffertype.
2020-11-19 16:37:28 -05:00
634a3dbe81
fix crashes/memleaks when waiting for a zmc process to start. Fix other memleaks
2020-11-19 10:43:02 -05:00
ae4e2a1d5e
We were overwriting the privacy/inactive zone with a more general one. Slight memleak
2020-11-19 10:42:17 -05:00
74972be9b5
spacing, code style. Set row=nullptr to quiet valgrind
2020-11-18 13:15:52 -05:00
d4253be69f
Use proper C++ initializer for Config. Don't copy the sql string, just use it from whereever in ram it is.
2020-11-18 13:15:07 -05:00
6542072334
fix logic causing segfault instead of waiting for zmc. Remove trailing whitespaces
2020-11-18 09:56:13 -05:00
9713a2ec00
Merge branch 'master' of github.com:ZoneMinder/zoneminder
2020-11-17 11:09:31 -05:00
d5295a4464
Fix segfaults and valgrind complaints. Initialize vncClientData, handle failure to connect freeing our client.
2020-11-17 11:08:11 -05:00
d2a203014f
rename diagpipe-r so that we don't have to create directories in SOCKS_DIR
2020-11-13 17:05:03 -05:00
23f27d5a11
include frame_type in debug message
2020-11-13 12:43:31 -05:00
08a8155b47
Implement a Monitor::disconnect function. Fix Fatals during connect and cleanup Analysis Monitor code to wait around for zmc. Handle zmc going away gracefully. Fixes a slow zma startup due to zmc not being setup yet.
2020-11-13 12:27:51 -05:00
ad4d0efba6
121 frames is too many, use >= instead
2020-11-12 17:00:32 -05:00
df783f4835
Merge branch 'master' into zma_to_thread
2020-11-12 12:53:55 -05:00
15f1175f25
spacing
2020-11-12 12:36:36 -05:00
de74a15ab1
Move diag_fifo pipes in SOCKS_DIR instead of assigned Storage area. Storage areas could be a fs that cannot handle sockets or fifos like NFS.
2020-11-12 11:53:51 -05:00
f91dcc9b60
declar rc as int
2020-11-11 20:05:47 -05:00
9636a76ccf
drop db lock before reporting mysql_errors
2020-11-11 17:42:29 -05:00
f855f207e2
Limit that # of db frames to buffer to 120 because the sql will exceed 8192.
2020-11-11 14:03:08 -05:00
d663683f47
Add a bunch of debug statements to figure out crash
2020-11-11 12:43:41 -05:00
cda3824a25
Use INSERT.. ON DUPLICATE... instead of REPLACE INTO. REPLACE INTO deletes the existing row. Since we now have event counts in there, we lose them.
2020-11-10 12:33:10 -05:00
27f336975c
Merge branch 'master' of github.com:ZoneMinder/zoneminder
2020-11-05 18:12:43 -05:00
33f58add11
Rename StartTime, EndTime in Events to StartDateTime and EndDateTime
2020-11-04 13:49:47 -05:00
09fe354a22
If event db insert fails, try again until it succeeds.
2020-11-04 11:59:08 -05:00
b8bd4b6961
Add fallback for now to endtime. Set endtime in AddFramesInternal as well just in case there was never another frame.
2020-11-02 16:34:00 -05:00
a857f677a6
cppcheck fixes, mostly %d->%u
2020-11-02 12:45:48 -05:00
5d32e0faf0
cppcheck fixes. Make curr_frame_id signed as we may subtract from it and go < 0
2020-11-02 12:45:19 -05:00
ed87ad36b3
missing break
2020-11-02 12:09:25 -05:00
4e80c04d23
fix lack of const to match def
2020-11-01 18:48:13 -05:00
5b918e69f1
spacing
2020-11-01 17:16:19 -05:00
033e749a57
improve code logic/spacing
2020-11-01 17:16:07 -05:00
296f6af7fb
Remove dirty hack that sets EndTime from monitor. It can get set in event destructor
2020-11-01 17:15:42 -05:00
80e54aee66
cppcheck improvements. Add const and override where we can
2020-11-01 17:15:17 -05:00
82c3436155
cppcheck improvements. Remove non-const StartTime and EndTime. We will remove the dirty hack use in zm_monitor.
2020-11-01 17:14:44 -05:00
f79602d638
cppcheck improvements. Use %u instead of %d where appropriate. Move sql def to block where it is used
2020-11-01 17:14:04 -05:00
1257a7ea37
improvements reported by cppcheck
2020-11-01 16:11:19 -05:00
a04f6df06a
Merge branch 'master' of github.com:ZoneMinder/zoneminder
2020-10-31 10:47:25 -04:00
a63600ccef
remove dead code
2020-10-30 16:09:24 -04:00
e5097d9466
code style
2020-10-30 11:50:16 -04:00
f3f0a6baff
remove debug
2020-10-26 18:48:43 -04:00
aef0cc55eb
fix merge
2020-10-20 18:27:03 -04:00
2eda49333f
Merge branch 'master' into zma_to_thread
2020-10-20 16:20:29 -04:00
56bbd91a02
Merge branch 'zma_to_thread' of github.com:Connortechnology/zoneminder into zma_to_thread
2020-10-20 16:05:35 -04:00
617a1faa99
Add pre-alarm frames when alarm_frame_count > 1 and prealarmcount=0
2020-10-19 13:25:26 -04:00
eefbed04c1
Add debugging for min_section_length keeping us in ALERT
2020-10-19 13:24:30 -04:00
df2f5f814b
fix case in mocord where cause would not contain motion
2020-10-19 13:24:08 -04:00
cc24df9593
init shared_data in the purpose=QUERY case to prevent crash. Also don't load zones if we don't need them
2020-10-19 13:23:40 -04:00
06c8ce57c2
Make zm_terminate available to anyone who includes zm.h
2020-10-16 20:06:53 -04:00
2f06a79ad8
fix compiler warnings
2020-10-16 20:04:26 -04:00
ae506d94fa
Improve log line telling why we are going into alarm
2020-10-11 10:01:11 -04:00
9768f081e4
Merge branch 'master' of github.com:ZoneMinder/zoneminder
2020-10-09 10:21:33 -04:00
268e364cfd
handle the paused case
2020-10-09 10:21:00 -04:00
9bfe8c28e4
Merge branch 'gcc_cpuid'
2020-10-09 08:48:01 -04:00
7d1598ae50
Merge branch 'master' into gcc_cpuid
2020-10-09 08:47:30 -04:00
cb38242917
use nullptr when appropriate
2020-10-08 16:46:47 -04:00
2f2562a876
init shared_data in the purpose=QUERY case to prevent crash. Also don't load zones if we don't need them
2020-10-08 16:46:30 -04:00
1aadeb2206
free the context as well.
2020-10-08 16:46:03 -04:00
871c556ac0
rename a variable to be more readable
2020-10-08 16:45:45 -04:00
1173f618ec
turn off negative pts detection... I have cameras that generate them all the time, they might actually be valid
2020-10-08 15:50:52 -04:00
71686fc1f2
fix case in mocord where cause would not contain motion
2020-10-08 15:50:12 -04:00
4afae7b738
More accurate seeking, remove debug and duplicated code. Correct type of curr_frame_id to match frame_count.
2020-10-08 11:13:18 -04:00
9cc7f0d360
Merge branch 'release-1.34'
2020-10-08 09:28:25 -04:00
86e744777c
Put back return on error
2020-10-08 09:12:37 -04:00
c28ff1f2b4
Include loading EndTime when loading Events data so that we can determine if an event is in-progress
...
Keep track of last_id which is the last frame id that we have info for. Use it instead of Frame Count to prevent
accessing non-existent frame records
close ffmpeg_input on event change
include duration in status messages because it may change when playing an in-progress event.
when we hit the end of our frame data if it is an in-progress event, reload the event data instead of moving to the next event.
Include X-Timestamp in http headers to match live stream behaviour
Only send time to next event when mode=ALL
Fix scale behaviour on event view
2020-10-08 09:06:56 -04:00
7cc023c1ec
Update Event details when writing Frame Data. Write Frame Details when inserting a Bulk Frame
2020-10-07 18:37:38 -04:00
9abde9ee06
Merge branch 'release-1.34'
2020-10-06 16:51:12 -04:00
044ce61ddb
Always do event change detection whether we are paused or not. Because we might be single-stepping. Change progress to a double as that it what it should be.
2020-10-06 16:47:51 -04:00
061c889394
Implement SEEK to offset using two 32bit integers to represent the double value
2020-10-06 16:35:46 -04:00
b27eac3cbf
Make centerCoord take a font size parameter to fix centering when using large font.
2020-10-05 16:12:48 -04:00
1c2dd92d31
Add LabelSize to get label_size from monitor
2020-10-05 16:12:33 -04:00
93ecb87caa
Clear the textframe before Annotating it.
2020-10-05 16:12:09 -04:00
c1c407ea39
debug new offset as well when SEEKING
2020-10-05 15:55:42 -04:00
c43011ba18
don't send keepalive when we have sent a textFrame
2020-10-05 13:33:57 -04:00
71085d9724
Clear the textframe before Annotating it.
2020-10-05 13:16:22 -04:00
5dd83d41fa
Add LabelSize to get label_size from monitor
2020-10-05 13:15:58 -04:00
059d7d388f
Make centerCoord take a font size parameter to fix centering when using large font.
2020-10-05 13:15:39 -04:00
6c24cd0c70
When playing backwards, say time to previous event instead of next. Instead of defaulting to -2x when hitting the rewind button, start with -1x.
2020-10-05 13:14:44 -04:00
419a03db25
Add debugging for min_section_length keeping us in ALERT
2020-10-05 12:11:39 -04:00
c5459020c9
implement value check & correct on replay_rate for VARPLAY
2020-10-05 12:11:11 -04:00
7a7a3413d3
Always do event change detection whether we are paused or not. Because we might be single-stepping. Change progress to a double as that it what it should be.
2020-10-05 10:29:42 -04:00
283f224a95
Add pre-alarm frames when alarm_frame_count > 1 and prealarmcount=0
2020-10-05 09:19:48 -04:00
3570c6e828
Better debug logging of event and frame inserts
2020-10-05 09:11:16 -04:00
07d0353373
Fix zms only sending 1 frame due to != instead of ==
2020-10-03 11:57:22 -04:00
387f5dd397
Fix double free of image
2020-10-02 12:47:05 -04:00
5d0c812dfb
fix resource leak on error
2020-10-02 12:46:53 -04:00
a39a656373
Merge branch 'master' into zma_to_thread
2020-09-29 11:02:40 -04:00
e163a3c93a
spacing more debug
2020-09-25 16:20:19 -04:00
f18cd57221
spacing more debug
2020-09-25 16:19:52 -04:00
d21c04e5dc
add Debug
2020-09-25 16:19:31 -04:00
8223d6ed15
When closing event, on first update, only update if Name has not been changed. If so, do the update without setting the Name.
2020-09-25 15:29:31 -04:00
795e98a09c
Merge pull request #2916 from connortechnology/zone_optimise
...
Improve code in zm_zone
2020-09-22 17:48:24 -04:00
2f03ceeccf
log referer when unable to authenticate
2020-09-22 13:10:39 -04:00
98aad6abbc
Make status UNKNOWN be -1 so that zmu -s retains backwards compatibility. Fixes #3048
2020-09-21 14:25:41 -04:00
d843ef89f6
Merge branch 'master' of github.com:ZoneMinder/zoneminder
2020-09-09 15:07:46 -04:00
30e9924601
Merge branch 'master' of github.com:ZoneMinder/zoneminder
2020-09-09 12:55:13 -04:00
53fe4c7f1b
Handle error conditions
2020-09-09 12:55:08 -04:00
a4b83b0e99
Merge branch 'master' of github.com:zoneminder/ZoneMinder
2020-09-09 12:13:54 -04:00
6bfd7c5e14
log referer when unable to authenticate
2020-09-09 12:13:28 -04:00
7b52237593
spacing and correct a libvlc=>libvncclient
2020-09-09 10:25:55 -04:00
eadd9dd4f4
spacing
2020-09-07 13:28:45 -04:00
4126f96b40
clean up sendFrame a bit introducing send_file and send_buffer utility functions
2020-09-07 11:19:47 -04:00
f3873d65e4
remove debug
2020-09-02 17:33:38 -04:00
77b978ed26
Handle non-connected monitor in processCmd. Quit when zm_terminate in checkInitiialized loop
2020-09-02 17:22:39 -04:00
794474afab
Add UNKNOWN status type. test for shared_data in ShmValid()
2020-09-02 17:22:00 -04:00
3a9cec8e4d
We no longer care about not being able to connect to the monitor.
2020-09-02 16:37:11 -04:00
ea3fcb16a6
Changes to not just die if not connected to monitor. Instead wait around spitting out an error image.
2020-09-02 16:36:05 -04:00
43e1ac2ad4
Send Text frame when unable to connect to the monitor.
2020-09-02 16:35:27 -04:00
f60d6ff1a3
Use BOUNDARY instead of ZoneMinderFrame
2020-09-02 16:34:56 -04:00
4d5d2ecd5d
Merge pull request #3030 from Carbenium/nullptr
...
Convert NULL/0 to nullptr
2020-08-26 16:54:28 -04:00
8f980a1168
Convert NULL/0 to nullptr
...
The 0 -> nullptr changes should definitely improve readability.
2020-08-26 22:03:40 +02:00
06dfe9b987
Extract generated part of zm_config.h into zm_config_data.h
...
With this change IDEs have it easier to correctly reference the
variable/class declarations. Additionally one does not have to
regenerate the zm_config.h file when changing the code.
2020-08-25 23:33:56 +02:00
394426cca2
zm_config: Fix a -Wwrite-string warning
...
For reference:
/home/peterke/DEV/zoneminder/build/src/zm_config.h:31:26: warning: ISO C++ forbids converting a string constant to ‘char*’ [-Wwrite-strings]
2020-08-25 20:51:42 +02:00
e5e2c3b347
fix stats off by 1 frame, don't alert on score 0
2020-08-24 10:57:54 -05:00
08aee63f66
Don't need a variable can just pass the define
2020-08-22 11:36:07 -04:00
2773737e54
Use gcc builtin functions for cpuid
2020-08-19 16:57:20 -04:00
a0bc60ceda
change not enabling ffmpeg msg to debug
2020-08-18 10:34:07 -05:00
ccda2b3707
EPIPE sets zm_terminate so no need to check
2020-08-18 09:37:21 -05:00
62d687adfa
dont warn or error for EPIPE errno's
2020-08-18 09:30:06 -05:00
610f73a835
Merge branch 'release-1.34'
2020-08-17 19:30:32 -04:00
e5dda8d142
Include avutils/imgutils.h to support compile on libav-tools
2020-08-16 14:56:52 -04:00
09b12a7dac
Remove extra space in event name
2020-08-13 10:51:10 -05:00
d42424d6d8
Merge branch 'release-1.34'
2020-08-11 11:41:11 -04:00
afae319c94
Fix MOCORD not going into ALARM state.
2020-08-11 11:02:26 -04:00
bf2cb5fb1f
Add PrimeCapture to zm_remote_camera_http. PrimeCapture is used to determine if we can connect and so by not implementing it, monitors like this say capturing even though they are not.
2020-08-08 10:21:06 -04:00
c0ab8bf90d
Merge branch 'master' into zma_to_thread
2020-08-07 17:53:32 -04:00
5fb56c9f57
Merge branch 'master' into zma_to_thread
2020-08-07 17:52:43 -04:00
98f315951e
Merge pull request #3003 from marillat/patch-1
...
Don't prefix manpage with zoneminder-
2020-08-07 12:34:30 -07:00
ed496e74fc
Update CMakeLists.txt
2020-08-07 07:54:58 +02:00
a19990f4d7
Merge branch 'release-1.34'
2020-08-06 11:57:35 -04:00
302189a65e
Don't use camera->LineSize when allocating shared images. It doesn't work because other processes don't know about it.
2020-08-06 10:11:00 -04:00
4d4fab46d6
Spacing, use FFMpegInit instead of deprecated ffmpeg calls
2020-08-05 19:17:00 -04:00
b867d0c463
Fix image copy when line sizes are not the same.
2020-08-05 11:33:22 -04:00
be05040a47
fix rotated images
2020-07-30 19:50:25 -04:00
05107bb2f7
Add debug of unused options
2020-07-30 15:16:31 -04:00
d8cd4386cf
rename GetOptEncoderParams to GetOptEncoderParams to GetOptEncoderParamsVec so that we can get at the std::string if we want to.
...
Use EncoderParams when setting movflags in VideoStore.
Move the content of this option to a help popup so that we can remove the comments from it. av_dict_parse doesn't handle the hash tag as a comment.
2020-07-30 15:06:05 -04:00
2f57ccc9b9
Merge branch 'release-1.34'
2020-07-29 16:27:01 -04:00
4ed0ad26a7
bail early if fwrite fails
2020-07-29 14:01:52 -04:00
b1054a7db6
bail earlier if writing content-length fails. Dropped connections aren't really errors, make them Info. Fixes #2996
2020-07-29 13:39:00 -04:00
7511b1fd7e
Fix for saving jpegs
2020-07-25 14:25:45 -04:00
859428db51
remove debug
2020-07-24 15:42:53 -04:00
f4a0f91d7f
nothing
2020-07-24 15:27:05 -04:00
1f889bd086
def don't use linesize when allocating share images
2020-07-24 15:26:48 -04:00
4ecfa32601
remove uneccessary multiplications from jpeg compression.
2020-07-24 15:26:28 -04:00
0e9da28a97
Don't pass linesize to shared images. Shared images have to have a contiguous chunk of memory.
2020-07-24 12:48:38 -04:00
0a9fdb4eb3
Fix second jump by matching final WriteJpeg destination. Just use linesize instead of assigning to row_stride
2020-07-24 12:41:27 -04:00
d9a9aeef1d
if linesizes don't match, allocate a frame buffer and use that when sws_scaleing and then copy to the image buffer.
2020-07-24 12:37:24 -04:00
490009446d
fix use of int or unsigned long instead of int for monitor id
2020-07-23 19:32:30 -04:00
559fe15e3f
fix use of int or unsigned long instead of int for monitor id
2020-07-23 19:32:25 -04:00
e9681fcdcf
fix use of int or unsigned long instead of int for monitor id
2020-07-23 19:31:12 -04:00
ee4d90d906
remove debug
2020-07-23 17:15:43 -04:00
cceb010048
set linesize in WriteBuffer which also sets colours, width, etc. Fixes segfault when streaming from jpegs
2020-07-23 17:14:56 -04:00
4f3b6a063e
don't cast fps to an int... values like 2.038 become 1.
2020-07-23 16:08:57 -04:00
e3a2099ca8
fix crash because we weren't setting alarm status
2020-07-23 16:08:35 -04:00
18272b9587
add debug for prealarmcount
2020-07-23 12:05:53 -04:00
7aa46df50f
Merge branch 'master' of github.com:/ZoneMinder/zoneminder
2020-07-23 12:05:32 -04:00
09d02e94d9
fix lack of c_str on path
2020-07-23 11:53:54 -04:00
27fed8b227
spacing
2020-07-23 11:53:33 -04:00
172eaad8bd
fix capture jpeg saving due to use of std::string
2020-07-22 22:45:11 -04:00
1416bc547e
Merge branch 'master' of github.com:ZoneMinder/zoneminder
2020-07-22 17:37:52 -04:00
f635afe00f
spacing
2020-07-22 17:30:39 -04:00
07165aed98
mostly spacing. Also set new_size from line_size in Assign(Image&) and set linesize in the assigned image
2020-07-22 17:30:28 -04:00
cf07e0a089
fix crashes, current status is: local camera works and can be viewed. Amazing
2020-07-22 13:41:27 -04:00
3641797500
Merge branch 'master' into zma_to_thread
2020-07-22 13:14:40 -04:00
7e6c637ec3
Unexpected colours while bad should only cause failure to annotate, not panic
2020-07-22 11:34:54 -04:00
d23dc42981
fix merge from master, make it compile
2020-07-21 18:48:45 -04:00
869860bb26
Merge branch 'master' into zma_to_thread
2020-07-21 17:49:39 -04:00
7575afc8d5
Merge branch 'master' into zma_to_thread
2020-07-21 17:38:32 -04:00
13e8ed1924
Clean up code that updates event with video_name. Fix video_file assignment missing /
2020-07-21 16:34:46 -04:00
f217ab54a3
When event_close_mode == CLOSE_ALARM and so we want to close the recording and start a new one, don't do it when alarm_frame_count > 1 until alarm_frames > alarm_frame_count. I believe this fixes a mem leak
2020-07-21 16:17:46 -04:00
f593261136
Convert use of char path[PATH_MAX] to std::string. Fixes potential overflows, quiets compile, should reduce ram quite a bit and might event be faster. Code is also more readable.
2020-07-21 16:16:16 -04:00
2eec85eaff
Convert use of char path[PATH_MAX] to std::string. Fixes potential overflows, quiets compile, should reduce ram quite a bit and might event be faster. Code is also more readable.
2020-07-21 16:10:05 -04:00
785087022d
Clear PerAlarmFrames on shutdown
2020-07-20 21:09:07 -04:00
a0be7b1fcb
fixup EmptyPreAlarmFrames
2020-07-20 21:02:49 -04:00
41dfb8ae38
fix duplicate jpeg_create_compress memleak
2020-07-20 21:02:06 -04:00
d716d1d686
Merge branch 'release-1.34'
2020-07-20 16:25:41 -04:00
5c844f9cae
remove extra space
2020-07-20 10:22:40 -04:00
01892352da
rename sseversion to sse_version
2020-07-19 17:50:47 -04:00
6b39f59b3a
use delete[] instead of delete.
2020-07-16 16:00:23 -04:00
2c056c188f
Fix compile on old ffmpeg
2020-07-16 15:59:08 -04:00
4e2732e12d
Priming capture logs should be debug not Info
2020-07-16 15:51:24 -04:00
a7b76dfe41
Remove debug
2020-07-16 15:48:09 -04:00
0a6321ee56
Update linesize when using AssignDirect. Fixes #2979
2020-07-16 15:48:06 -04:00
d849ee54a4
Update state to ALARM AFTER we have opened the event, so that we get the correct event Id. Fixes #2978 Fixes #2894
2020-07-16 15:47:01 -04:00
a8e46feb12
Merge branch 'master' of github.com:ZoneMinder/zoneminder
2020-07-16 15:42:56 -04:00
3658c3b589
Update state to ALARM AFTER we have opened the event, so that we get the correct event Id. Fixes #2978 Fixes #2894
2020-07-16 15:36:26 -04:00
c2a025300f
Remove debug
2020-07-16 15:34:29 -04:00
9e06385f26
Update linesize when using AssignDirect. Fixes #2979
2020-07-16 14:50:50 -04:00
9b05337e57
Priming capture logs should be debug level, especially if they ar egoing to log passwords
2020-07-13 15:03:04 -04:00
880219bb0f
Merge branch 'release-1.34'
2020-07-07 18:58:32 -04:00
9b447bde8e
remove extra {
2020-07-07 18:56:51 -04:00
e675c8373e
Merge branch 'release-1.34'
2020-07-07 16:15:56 -04:00
916d1ed59e
Merge branch 'release-1.34' of github.com:ZoneMinder/zoneminder into release-1.34
2020-07-07 16:15:23 -04:00
c79c65e72e
spacing fixes
2020-07-07 16:14:57 -04:00
af74ecac4c
Pass along the image linesize to Image constructors so that Image knows about the requirement for it to be 32byte aligned.
2020-07-07 16:14:38 -04:00
fd9272241a
Introduce constructors that can be passed a linesize which is the # of bytes to use to store a line of image. This can be different from the image width * colours as it should be 32byte aligned for use with sws_scale.
2020-07-07 16:13:41 -04:00
cae8978501
add an alignment variable to ffmpeg_camera to use wherever we want to tell ffmpeg about the buffer and linesize alignment. Figure out linesize in the constructor so that zm_monitor can pass the info along to zm_image.
2020-07-07 16:12:14 -04:00
209cbe1000
Merge branch 'master' of github.com:ZoneMinder/zoneminder
2020-07-07 09:23:46 -04:00
acf8a30434
Merge branch 'release-1.34'
2020-07-07 09:22:56 -04:00
533876f313
rewrite code to use fewer lines. No logic change.
2020-07-07 09:16:42 -04:00
dcab218a2e
remove global config item CREATE_ANALYSIS_IMAGES
2020-07-06 12:22:41 -05:00
864cd4c178
introduce a linesize variable which represents the # of bytes to hold a line of the image in the buffer. May be > width * colours
2020-07-05 17:51:57 -04:00
2eac69dd88
fix duplicate extrapad names
2020-07-04 17:16:43 -04:00
2db65d3821
Merge branch 'release-1.34'
2020-07-04 09:09:24 -04:00
e137e1dacf
Don't consult EVENT_CLOSE_MODE if mode is RECORD
2020-06-26 19:30:35 -04:00
728f41fe9c
Log @debug when a linked monitor is disconnected. Use ZM_MAX_RESTART_DELAY instead of hard coded 60 seconds before next reconnect attempt
2020-06-23 16:56:35 -04:00
31a3be5c8e
check shared_data->valid when checking if LinkedMonitor is connected
2020-06-23 15:05:17 -04:00
7354b4d30f
Fix compile on old ffmpeg
2020-06-23 14:43:11 -04:00
a15aace2fb
introduce shared_data->zmc_heartbeat_time and zma_heartbeat_time.
2020-06-22 10:40:00 -04:00
4d020bab56
spacing
2020-06-22 10:39:29 -04:00
ae5116ff9c
improve efficiency of outputting device query. The constant strlen's were terrible.
2020-06-15 15:29:26 -04:00
bd287d7c7c
Fix segfault when timestamp contains an unimplemented character. Fixes #2943
2020-05-29 11:45:38 -04:00
2637c887f8
Fix segfault when timestamp contains an unimplemented character. Fixes #2943
2020-05-29 11:44:34 -04:00
662b9894bd
Don't delete send_image because it is static. Fixes #2923
2020-05-23 16:12:55 -04:00
ce9e2c8b27
Merge branch 'release-1.34'
2020-05-15 11:53:09 -04:00
9ea1c637f9
Remove debug Exiting message
2020-05-15 11:48:41 -04:00
6bb2c09a72
Merge branch 'release-1.34'
2020-05-15 11:41:34 -04:00
7a85be59be
Remove errant closing db debug output
2020-05-15 10:22:58 -04:00
d92772343a
Merge branch 'release-1.34'
2020-05-14 12:02:50 -04:00
25a772c5eb
reorder logic a bit to make it easier to read. Make exit_zmu not return a value.
2020-05-14 12:02:02 -04:00
16e7ca5a51
failure opening a monitor should not be fatal.
2020-05-14 12:01:24 -04:00
402c0c6a1b
Fix build on older ffmpeg
2020-05-14 12:01:03 -04:00
efbab4e2bc
Dont' call mysql_library_end as it segfaults and hangs.
2020-05-14 12:00:36 -04:00
bbf64de40e
If there is a failure when decoding due to lack of support for the codec profile, re-init without hwaccel
2020-05-13 08:04:53 -04:00
7e80b33ee0
If there is a failure when decoding due to lack of support for the codec profile, re-init without hwaccel
2020-05-12 15:10:08 -04:00
81cd338545
Merge branch 'master' of github.com:zoneminder/ZoneMinder
2020-05-11 08:34:19 -04:00
3d278eddf8
erge branch 'master' into batch_frame_records
2020-05-08 20:16:36 -04:00
1f6e68c129
Merge branch 'release-1.34' of github.com:ZoneMinder/zoneminder into release-1.34
2020-05-08 17:26:02 -04:00
a798e874fe
Spacing
2020-05-07 13:44:32 -04:00
fcf6eb2631
Add setting the codecpar->codec_type as well. Fixes detecting stream type
2020-05-07 13:44:02 -04:00
40633830d0
Code style/spacing
2020-05-07 13:43:35 -04:00
b1b258ab9b
Code Style and use backtick escapes on sql column names, specifically Function
2020-05-07 13:43:05 -04:00
6939f9953a
code style, merge Debug lines and consult zm_terminate in the main while loop
2020-05-07 13:41:39 -04:00
87d0eb88b7
code style, merge Debug lines and consult zm_terminate in the main while loop
2020-05-07 13:41:29 -04:00
09740d72a4
code style, merge Debug lines and consult zm_terminate in the main while loop
2020-05-07 13:41:09 -04:00
7489d66557
use is_video_stream utility function.
2020-05-07 13:40:32 -04:00
9f73a55087
Make params to is_video_* a const because we don
...
't alter it
2020-05-07 13:39:32 -04:00
bab15217f5
Make zm_terminate available to anyone who includes zm.h
2020-05-07 13:38:56 -04:00
4ff341a0f5
Merge branch 'master' into zma_to_thread
2020-05-02 18:03:42 -04:00
e9b1eacc6d
Fix not finding stream with old libs
2020-05-02 11:49:28 -04:00
eca56c7123
Provide a more useful error message when the monitor's function is set to NONE. Fixes #2877
2020-05-01 19:21:20 -04:00
ef540aa972
sun_path is defined to be 108 bytes. No need for 4095. Quiets compiler warnings
2020-05-01 19:13:50 -04:00
c9f04c9136
Support event_close_mode for record mode
...
Support event_close_mode for record mode (with linked monitor)
2020-05-01 19:10:23 -04:00
6098c4c961
properly close streams and free memory in ffmpeg_input destructor
2020-05-01 19:03:18 -04:00
c5cf6e1a74
undo random addition
2020-05-01 19:01:09 -04:00
050868fad1
fix build on libavtools < 12
2020-05-01 19:00:40 -04:00
9beb5cee3a
use delete[] instead of delete.
2020-05-01 18:55:48 -04:00
24aaeee155
dynamically load monitor Object when loading event data. Also dynamically load Storage, but only when the Id is different. Free the various objects in the destructor. Sync up some spacing issues with master.
2020-05-01 18:44:35 -04:00
2071b2a71e
Guess video file name for in progress events
2020-05-01 18:14:58 -04:00
917c43a54b
If can't connect to db, bail instead of loading config
2020-05-01 18:08:32 -04:00
f96cc66b9d
google code style
2020-05-01 18:06:27 -04:00
ffcef8a42a
spacing and make sws_context static global so we don't have to keep initializing it when playing back from mp4 in eventstream.
2020-05-01 15:22:32 -04:00
ffd7970b07
Merge branch 'release-1.34'
2020-05-01 13:17:10 -04:00
14b90903a9
Merge branch 'release-1.34' of github.com:ZoneMinder/zoneminder into release-1.34
2020-05-01 12:50:10 -04:00
3675ee1c33
Properly delete FramesData as well.
2020-05-01 09:56:27 -04:00
434f34f027
use delete[] instead of delete.
2020-04-30 11:04:55 -04:00
a6ee817bc4
Fix auth by hash
2020-04-28 19:00:42 -04:00
e21ffbea7d
Merge branch 'fix_zms'
2020-04-26 18:43:39 -04:00
ae9a5766f5
Merge branch 'release-1.34' into fix_zms
2020-04-26 18:19:30 -04:00
3b11258fbc
Make checkEventLoaded return true if a new event was loaded, false otherwise. The idea is to give more information back to whoever calls it
2020-04-26 15:22:29 -04:00
a7363a4b36
reduce compiler deprecation warnings by using our zm api's that hide support for older ffmpeg versions
2020-04-24 19:05:58 -04:00
7a7f366eb1
Change semantics of zm_send_packetreceive_frame to return the # of bytes consumed. This is inline with how to old deprecated api used to work. The new api consumes the packet, so just return packet size.
2020-04-24 19:05:17 -04:00
c6c8a23c02
sun_path is defined to be 108 bytes. No need for 4095. Quiets compiler warnings
2020-04-24 18:03:00 -04:00
b0c5abc2c2
Quiet compiler warnings.
2020-04-24 17:51:00 -04:00
ed7c0815de
Merge branch 'release-1.34'
2020-04-24 17:05:32 -04:00
3dd5ac8146
shrink buffers for writing timestamp into. Don't need 64 when 28 will do. Quiets compiler warnings
2020-04-24 16:43:27 -04:00
e274aa471a
Use fputc instead of printf for separator to be a tiny bit more efficient. Report current state when forcing alarm on
2020-04-23 18:13:34 -04:00
00dad82b46
Fix use of strncpy using the entire size of the buffer. You have to -1 for the null char
2020-04-23 18:12:54 -04:00
4aaa02dc24
fix cpplint complaints and remove casts that are unnecessary. Micro-optimisation by using fputs for date_string instead of fprintf
2020-04-23 18:12:44 -04:00
df4fab5fbf
re-enable fragmented mp4 recordings
2020-04-23 18:11:10 -04:00
b8781301f8
Drop lock around openFile so that we don't hang
2020-04-23 18:08:14 -04:00
d31216330c
Only align buffers to 32bit if using a 32bit pix format. Fixes #2819
2020-04-23 18:07:07 -04:00
5bf068791b
Merge branch 'rate_dropdown' into release-1.34
2020-04-23 16:11:59 -04:00
9b77f77ac3
better logs
2020-04-23 11:09:39 -04:00
098ab4faae
Merge branch 'master' of github.com:ZoneMinder/zoneminder
2020-04-23 10:26:25 -04:00
4b53c7660e
Merge pull request #2911 from hax0kartik/dl-curl
...
Dynamically load libcurl, libvlc and libvnc
2020-04-22 09:49:37 -04:00
76d88621ac
clean up Stream and EventStream Object initializers
2020-04-21 08:28:44 -04:00
37c829f2bf
cleanup code a bit. Move BlobStats to the Zone Object so that it isn't constantly being allocated/freed from the heap. Improve ParsePolygon.
2020-04-20 11:19:33 -04:00
924841ae71
Merge pull request #2913 from connortechnology/fix_monitor_loading
...
Fix monitor loading
2020-04-18 17:49:34 -04:00
d0c36c9888
Merge pull request #2913 from connortechnology/fix_monitor_loading
...
Fix monitor loading
2020-04-17 10:26:03 -04:00
b504110825
Correct loading monitor values from db
2020-04-16 17:54:20 -04:00
f60f91c834
Merge branch 'master' of github.com:ZoneMinder/zoneminder
2020-04-14 17:01:58 -04:00
c50509d22a
Fix use of strncpy using the entire size of the buffer. You have to -1 for the null char
2020-04-14 17:01:50 -04:00
17356a7b3a
Use a BOUNDARY define to construct boundary strings. Get rid of code that kills zms when the frame rate drops too low, as dying doesn't help, and some cameras just have a really low frame rate.
2020-04-14 17:01:12 -04:00
9193ef4a62
Send the first frame twice to fix low framerate display in Chrome
2020-04-14 16:44:03 -04:00
640dfdd4a0
Dynamically load libvnc at runtime
2020-04-14 02:46:01 +05:30
143ad394a9
Dynamically load libvlc
2020-04-14 00:15:06 +05:30
f4c4441308
Convert all fatals in lincurl camera to errors
2020-04-13 18:55:29 +05:30
657a353c34
Support event_close_mode for record mode
...
Support event_close_mode for record mode (with linked monitor)
2020-04-12 20:42:43 -04:00
3a8b931cda
Fix stuff
2020-04-08 12:52:09 -04:00
64f57aa373
Dynamically load libcurl at runtime
2020-04-08 05:18:16 -04:00
8193e4ea4e
replace snprintf with hex table lookup for speed
2020-04-06 11:46:14 -04:00
1e38ba871d
Merge branch 'master' into fix_use_of_sprintf
2020-04-06 11:23:12 -04:00
c6e0b9be39
Merge branch 'master' into fix_use_of_sprintf
2020-04-06 11:21:43 -04:00
98e9355723
snprintf will put the terminator in. We don't have to.
2020-04-06 11:21:02 -04:00
face73ad7e
Fix compilation
2020-04-05 22:45:47 -04:00
2827ba38cd
use snprintf instead of sprintf. Fix putting a \0 terminator
2020-04-05 13:41:03 -04:00
9441fe833f
satisfy cpplint
2020-04-05 13:23:12 -04:00
04a6d5e42e
Fix a memory leak, shift rfbClientCleanup to Terminate()
2020-03-30 10:11:42 -07:00
6886b2b375
Modify Convert to scale as well
2020-03-28 15:17:19 -07:00
b93f5d970c
sws_scale directly into the image. Allocate and de-allocate sws in Prime and Close. Seems to fix scaling.
2020-03-28 16:03:52 -04:00
e894102cb7
debug
2020-03-28 11:59:05 -04:00
a781cc2c87
WIP scaling
2020-03-27 14:32:50 -04:00
b615eada41
Add a missing endif
2020-03-27 14:32:50 -04:00
d61e5e42ca
Use preprocessors to ensure libvnc monitor is only built when libvnc is found
2020-03-27 14:32:50 -04:00
ae80b3b859
Start implementing VNC
2020-03-27 14:32:50 -04:00
bc950c9a34
Remove <set> and <map> as they are not used
2020-03-26 15:11:39 -04:00
79ad2ec87d
better debug logging for SLOWFWD and SLOWREV listing new frame_id
2020-03-26 15:08:32 -04:00
e98f422730
Use %d for values that are actually integer in debug statements
2020-03-26 15:04:28 -04:00
45299955a1
Fix SLOW FWD not working
2020-03-26 12:21:42 -04:00
ea7bea4c6e
fix warnings because length() returns long unsigned int, but gnutls_datum_t size is unsigned int.
2020-03-26 12:08:21 -04:00
a5ec89ab1b
use bool instead of my_bool to fix #2886
2020-03-26 12:07:58 -04:00
cbda9848ab
Fix SLOW FWD not working
2020-03-26 12:06:07 -04:00
adf953dcdd
use bool instead of my_bool to fix #2886
2020-03-24 15:30:52 -04:00
0ecd35e1c6
fix warnings because length() returns long unsigned int, but gnutls_datum_t size is unsigned int.
2020-03-24 15:30:16 -04:00
7fcd71e684
Use fputc instead of printf for separator to be a tiny bit more efficient. Report current state when forcing alarm on
2020-03-24 15:19:16 -04:00
4aaaeda6ed
Merge branch 'master' of github.com:ZoneMinder/zoneminder
2020-03-16 21:06:39 -04:00
ad61a0e385
Escape Function to fix mysql8. Fixes #2885
2020-03-16 21:06:31 -04:00
30d45aee8f
formatting/comment
2020-03-13 15:11:00 -04:00
dd76ee2c9f
spacing
2020-03-13 15:01:19 -04:00
6b61f4ac84
when an event is created, write video name if applicable so image.php can extract frames while recording is in progress
2020-03-13 14:47:22 -04:00
ff7defa84e
re-enable fragmented mp4 recordings
2020-03-13 14:46:20 -04:00
11b1bf1100
undo random addition
2020-03-11 10:54:52 -04:00
c90655d178
fix build on libavtools < 12
2020-03-11 10:54:35 -04:00
9a3127da06
Merge branch 'rate_dropdown'
2020-03-10 18:47:19 -04:00
84d719f2dd
Merge branch 'release-1.34' into rate_dropdown
2020-03-10 16:06:11 -04:00
d055d40bfb
Merge branch 'release-1.34'
2020-03-09 13:15:16 -04:00
ffed88454f
Provide a more useful error message when the monitor's function is set to NONE. Fixes #2877
2020-03-09 13:14:09 -04:00
3a129a8818
Merge pull request #2874 from hax0kartik/2810-libjwt
...
Add libjwt and remove gnutls-openssl wrapper
2020-03-06 14:48:45 -05:00
835966eb24
Merge pull request #2874 from hax0kartik/2810-libjwt
...
Add libjwt and remove gnutls-openssl wrapper
2020-03-05 15:30:27 -05:00
a53f67cd31
Remove a extra file added by mistake
2020-03-05 09:53:07 -08:00
15aec7b109
Add libjwt
2020-03-05 09:51:33 -08:00
2091ad8c92
Add libjwt and remove gnutls-openssl wrapper
2020-03-05 09:29:27 -08:00
b78acd7b95
google code style
2020-03-04 14:14:38 -05:00
6d4ed20745
Drop lock around openFile so that we don't hang
2020-03-04 14:14:28 -05:00
2882693791
If can't connect to db, bail instead of loading config
2020-03-04 14:13:44 -05:00
444c6fd372
Revert "Add libjwt as a optional library"
2020-03-04 13:57:27 -05:00
5443e6385b
Merge pull request #2844 from hax0kartik/2810-libjwt
...
Add libjwt as a optional library
2020-03-04 11:58:27 -05:00
4c7178b78b
fix cpplint complaints and remove casts that are unnecessary. Micro-optimisation by using fputs for date_string instead of fprintf
2020-03-04 11:02:21 -05:00
54c14db863
better logs
2020-03-01 14:02:44 -05:00
182120343f
Fix an issue while finding libjwt-gnutls and add a missing include
2020-03-01 06:17:43 -08:00
81f8f85be5
Revert "use CONCAT when updating event notes so that we don't overwrite notes set by other processes."
...
This reverts commit a90033e026
2020-02-25 16:38:31 -05:00
20d1cc99f4
Merge branch 'fix_zmu_using_token_auth'
2020-02-25 14:41:01 -05:00
f05dbd3b89
Fix zmu not respecting jwt token auth when AUTH_RELAY set to none
2020-02-25 14:40:47 -05:00
4798fba807
Merge branch 'use_concat_when_updating_event_notes'
2020-02-25 14:16:46 -05:00
a90033e026
use CONCAT when updating event notes so that we don't overwrite notes set by other processes.
2020-02-25 14:16:30 -05:00
5ed6d36afe
Merge branch 'release-1.34'
2020-02-24 14:12:21 -05:00
f4521d20e0
Fix applying rotation to x264encoded video which has already been rotated.
2020-02-24 14:12:10 -05:00
c1dfb8571a
revert bogus code in Image(AvFrame)
2020-02-24 14:10:54 -05:00
d2872becfc
Only align buffers to 32bit if using a 32bit pix format. Fixes #2819
2020-02-23 18:14:17 -05:00
b1ce0ec0e8
Fix cmake
2020-02-23 06:18:32 -08:00
d2f852b9db
Merge branch 'zma_to_thread' of github.com:connortechnology/ZoneMinder into zma_to_thread
2020-02-22 18:01:00 -05:00
bca4108396
Merge branch 'storageareas' into zma_to_thread
2020-02-22 17:58:30 -05:00
d51fdafbc0
Merge branch 'master' of github.com:ZoneMinder/zoneminder
2020-02-21 09:37:45 -05:00
b4729f5aa8
Handle other colours and subpixel formats in Image::Image(AvFrame*) than 32bit RGBA
2020-02-21 09:34:44 -05:00
46d77ee849
Add libjwt as a optional library
2020-02-20 07:55:59 -08:00
1959b2e070
Add optional library jwt
2020-02-20 07:45:33 -08:00
c488756eb8
Merge branch 'master' into fix_remote_http
2020-02-19 14:42:24 -05:00
4f25426b1f
load event orientation as well and if it's an mp4 do the rotation on the image before outputting. Fixes #2829
2020-02-10 16:22:01 -05:00
d0003215b1
Merge branch 'master' into rate_dropdown
2020-01-17 12:30:35 -05:00
9525268192
Wait 5 seconds instead of 1 after failure to connect. Reduces error logs filling up db.
2020-01-13 12:52:34 -05:00
0afcbe626c
remove redundant logging line. Connect() will do the logging
2020-01-13 12:51:30 -05:00
6da998b0c0
code comments and parenthesis
2020-01-10 16:42:18 -05:00
1bdabefb2d
fix single stepping in reverse but actually modifying curr_frame_id
2020-01-07 17:07:35 -05:00
1c197db619
Merge branch 'master' into rate_dropdown
2020-01-07 14:49:58 -05:00
b85cf7d8a1
include error message when complaining about failing to create the hwaccell device
2020-01-07 11:03:45 -05:00
fd633a2175
Merge branch 'master' of github.com:zoneminder/ZoneMinder
2020-01-05 17:28:50 -05:00
Isaac Connor
Peter Keresztes Schmidt
Isaac Connor
Isaac Isaac
Terry Sanders
hax0kartik
Vertigeaux
Bluemax
Isaac Connor
Isaac Connor
Andrew Bauer
dmo
Joe540
Pliable Pixels